Rheological properties of hyperbranched polymer/poly(ethylene terephthalate) reactive blends

The rheological properties in solution, in shear and in uniaxial elongation of poly(ethylene terephthalate) (PET) reacted together with hyperbranched polymers (HBPs) were investigated. Two different PET grades, of low and high molecular weights, were compounded with sub‐ to over‐stoichiometric concentrations of HBPs of second and fourth pseudo‐generation, and subsequently subjected to a solid‐state polycondensation (SSP). The formation of microgels, which occurs at high HBP concentration, gave rise to a large increase in melt elasticity and a related decrease in melt strength. At low HBP concentrations, the complex viscosity of the unreacted HBP/PET was considerably reduced, thus demonstrating a lubrication effect of the HBP molecules. During SSP, the intrinsic and shear viscosities exhibited a gradual increase, which was similar for both PET and HBP/PET blends, and was correlated to an increase in molecular weight, through linear‐chain extension and branching reactions. The elongational viscosity of the reactive blends was also increased as a function of reaction time, and this increase was much larger in the case of the HBP/PET blends. A 400% increase in melt strength of the PET was obtained by combining SSP and trace amounts of an HBP of second generation, without any decrease in drawability.     

Effect of marangoni stresses on the deformation and coalescence in compatibilized immiscible polymer blends

The effect of physical compatibilization on the deformation and coalescence of droplets in immiscible polymer blends is discussed. Evidence is provided for the existence of concentration gradients in block copolymers along the interface during deformation. This causes complex changes in droplet shapes during deformation and relaxation. These concentration gradients also result in Marangoni stresses, which stabilize the droplets against deformation and breakup. Coalescence experiments have been performed, varying both the compatibilizer concentration and the shear rate. Existing coalescence models have been evaluated. An empirical extension of Chesters' partially mobile interface model is presented, that treats the effects of Marangoni stresses on the coalescence process as a higher effective viscosity ratio.     

Polymerization of lactams, 95 Preparation of polyesteramides by the anionic polymerization of ε-caprolactam in the presence of poly(ε-caprolactone)

Preparation of polyesteramides-poly[(ε-caprolactam)-co-(ε-caprolactone)]s by anionic polymerization of ε-caprolactam in the presence of poly(ε-caprolactone) at 150 °C was studied in this paper. ε-Caprolactam magnesium bromide was used as an initiator of polymerization and polymeric materials containing 5-25 wt% ε-caprolactone units were obtained. Thermal methods (DSC and DMA) were employed for characterization of poly[(ε-caprolactam)-co-(ε-caprolactone)]s and their mechanical properties were also evaluated. By introducing the activator with N-acyllactam structure, the polymerization rate increased and it was possible to carry out the polymerization at 110 °C. Mechanical properties of polyesteramides were influenced by both the content of ε-caprolactone units incorporated into copolymer and polymerization temperature. The mechanism of incorporation of poly(ε-caprolactone) is discussed. The results show that it is not possible to restrict exchange transacylation reactions, progressing in the course of polymerization, by kinetic tools.     

On the effect of treating poly(acrylic acid) with argon and tetrafluoromethane plasmas: Kinetics and degradation mechanism

Poly(acrylic acid) (PAAc) films were treated with either an argon or a tetrafluoromethane (CF₄) plasma and subsequently analyzed with X-ray photoelectron spectroscopy (XPS). PAAc films were decarboxylated during both types of plasma treatments. In addition, during the CF₄ plasma treatment, the PAAc films became fluorinated. The plasma phase during the argon plasma treatment of PAAc films was investigated with optical emission spectroscopy. It was shown that during this plasma treatment carbon dioxide, water, and possibly hydrogen were liberated from the PAAc surface. By covering the surface of PAAc films with different materials (lithium fluoride, UV fused silica, and glass) during the plasma treatment, it was possible to differentiate between photochemically induced and particle-induced changes of the surface. This method was used to show that decarboxylation during the argon plasma treatment was caused by vacuum UV radiation (wavelength < 150 nm) and the decarboxylation/fluorination during the CF₄ plasma treatment was induced by reactive fluorine-containing species from the plasma phase. Furthermore, during both processes, etching of the PAAc surface occurred. Based on these mechanisms, kinetic models were derived that could be used to describe the measured kinetic data adequately. © 1994 John Wiley & Sons, Inc.     

Single-Site Calcium Initiators for the Controlled Ring-Opening Polymerization of Lactides and Lactones

Summary Single-site calcium initiators containing chelating tmhd (H-tmhd = 2,2,6,6-tetramethylheptane-33-dione) ligands [(THF)Ca(tmhd)_]2[-N(SiMe₃)₂](-tmhd) (2) and [(THF)Ca(tmhd)]₂[-OCH(Me)Ph](-tmhd) (3) have been synthesized and applied for the ring-opening polymerization of L-lactide and -caprolactone. Both 2 and 3 were highly reactive and promoted a fast polymerization of L-lactide and -caprolactone to high monomer conversions under mild conditions (THF as a solvent, room temperature). More importantly, results showed that the ring-opening polymerizations of lactides and lactones initiated by either 3 or 2 in the presence of equivalent 2-propanol are living, to provide polymers and block copolymers of controlled molecular weights and tailored end-groups. The polymerizations were first-order in monomer up to high conversions, in which the in situ initiating system 2/2-propanol revealed no induction period and much faster polymerization kinetics as compared to 3.     

Analytical Determination of the Distribution of Polishing Time over the Surface of Polished Tiles

Several kinds of glossiness pattern can be seen on the surface of porcelain stoneware tiles right after the polishing process, as a function of the kinematics performed by the polishing heads. For the newest generation of industrial polishing trains, where a transverse oscillation is included, there is still a great need for literature about the resulting patterns. This paper intends to find the spatial distribution of time under polishing analytically using the kinematics equations involved in the polishing process. The measured values of glossiness collected from three polished tiles are also presented. The importance of adopting a good kinematics for the polishing process has been highlighted, and the equations developed herein are useful tools for further attempts at optimizing the polishing process.     

Fiber Coating Concepts for Brittle-Matrix Composites

The current interest in tough, high-temperature materials has motivated fiber coating development for brittle-matrix composites with brittle reinforcements. Such coatings are needed for controlled interface debonding and frictional sliding. The system investigated in this study was sapphire fiber-reinforced alumina. This system is thermochemically stable for severe use conditions, exhibits little thermal expansion mismatch, and utilizes the excellent strength and creep resistance of sapphire reinforcements. Porous oxide and refractory metal coatings which satisfy requirements for toughness improvement in these composites were identified by employing a variety of newly developed mechanical testing techniques for determining the interfacial fracture energies and sliding resistances.     

Polymerization characteristics of a dye of anthraquinone

A technical dye of the anthraquinone type was analyzed by GPC, mass spectroscopy, and elemental analysis. Along with the polymerizable component, N-[4-amino-3-methoxyanthraquinonyl-(1)] methacrylamide (I), it contained a saturated admixture, N-[4-amino-3-methoxyanthraquinonyl-(1)]-2-chloro-2-methylpropionamide (II). The homopolymerization of I was carried out, and admixture II was isolated and characterized. The copolymerization of the dye with styrene and methyl methacrylate was verified, and the retardation effect of II on the polymerization of these monomers was evaluated.     

Impacts of new technologies on media usage and social behaviour in domestic environments

Technological infrastructure at home is changing continuously and is becoming increasingly interconnected. Media devices, including the TV set, provide access to the Internet and offer manifold opportunities to consume media on demand. Additionally, personal devices, such as smartphones, also enable flexible consumption and sharing of media. Questions about how these technologies change the user's media usage and how these changes affect the social structure of a household, however, remain largely unanswered. In order to gain insight into the adoption of new technologies into daily routines, we explored these changes in respect of people's media usage in a qualitative long-term Living Lab study. We will present findings regarding personal routines, flexible integration of new devices into existing practices, influences on households as social systems and related issues in device access and collective use. We will highlight potentials and conflicts regarding device shifts and roles; restrictions in device access; social influences in the living room; and individual changes in media consumption.