Synthesis of submicron-sized spherical Y2O3 powder for transparent YAG ceramics

Spherical monodispersed, submicron-sized Y₂O₃ powder was prepared via a homogeneous precipitation method using nitrate and urea as raw materials. The structure, phase evolution and morphology of Y₂O₃ precursor and the calcined powder were studied by FTIR, TG/DTA, XRD and SEM methods. The sphere size of the precursor was about 250 nm and that of Y₂O₃ powder calcined at 800 °C for 2 h was about 200-210 nm. With the spherical Y₂O₃ powder and a commercial Al₂O₃ ultrafine powder, high transparent YAG ceramics was fabricated by vacuum sintering at 1780 °C for 6 h through a solid-state reaction method. The in-line transmittances of the as-fabricated YAG ceramics at the wavelength of 1064 nm and 400 nm were 82.8% and 79.5%, respectively, which were much higher than that of the YAG ceramics with a commercial Y₂O₃ powder and a commercial Al₂O₃ ultrafine powder directly. The superior properties are attributed to the good morphology, dispersibility and uniform grain size of the as-prepared spherical Y₂O₃ powder, which matches that of the commercial Al₂O₃ powder.     

Modeling the decay of ammonium oxidizing bacteria

A bench-scale sequencing batch reactor was used to study factors affecting the endogenous decay of the ammonium oxidizing biomass (AOB) in different operating conditions. AOB decay was very sensitive to oxygen concentration, and increased up to 0.4 d⁻¹ for oxygen concentration of 7 mg O₂ L⁻¹. The decay in anaerobic conditions was shown to be very low (0.03 d⁻¹) when compared to literature data.The effect of nitrite and nitrate on AOB decay was also studied. The correlation was quite weak suggesting that both nitrate and nitrite absence had little impact on decay which is contrary to what is typically assumed in some of the existing process models. A simple expression for the decay of AOB was proposed, calibrated and validated using the results of batch kinetic tests and of the continuous sequencing batch reactor monitoring.     

Identification and chemical characterization of specific organic indicators in the effluents from chemical production sites

The structural diversity of the wastewater composition was described by the use of detailed non-target screening analyses of industrial effluents from chemical production sites. Determination of the indicative organic compounds acting as potential molecular indicators for industrial emissions from chemical production industries has been possible due to (i) detailed characterisation of industrial contaminants and identification of compounds with high source specificity, (ii) quantitative determination of the organic constituents in the industrial effluents and (iii) the review of their industrial applications. The determination of potential site-specific markers and industrial molecular indicators corresponding to certain production processes (production of starting materials for manufacturing paper and printing inks, powder coatings as well as epichlorohydrin production) was performed in this work.The results of this study allowed significant contributions to the chemical characterisation of industrial contaminants and isolation of indicators that can act as representatives of industrial effluents in the aquatic environment.     

Life style and home environment are associated with racial disparities of asthma and allergy in Northeast Texas children

A high prevalence and racial disparities in asthma and allergy have been observed in American children. This study aimed to identify risk factors for asthma and allergy among children, and their contribution to racial disparities in allergy prevalence. A population-based cross-sectional study was carried out among children aged 1-8 years in Northeast Texas 2008-2009. The health conditions, life style and home environment of 3766 children were surveyed by parental questionnaires through e.g. daycares, elementary school, and medical clinics. Among participants who indicated their ethnicity, 255 were Mexican-Americans, 178 Afro-Americans and 969 Caucasians. Afro-American children had a significantly higher prevalence of asthma and eczema. Caucasian had the highest prevalence of rhinitis. Compared to Mexican-American children, Afro-American and Caucasian children were breast fed shorter time, more often went to day care center, had pets and environmental tobacco smoke exposure at home more often. For all children, being at a day care center, being exposed to dampness and environmental tobacco smoke at home were strong risk factors for asthma and allergy. Central air conditioning system was associated with an increased prevalence of wheeze among Mexican-American children, while pets were associated with an increased risk of rhinitis among Afro-American and Caucasian children. Caucasian children were generally not healthier than relatively poor Mexican-American children. Differences in the prevalence of asthma and allergy between races cannot be explained by socioeconomic status only. Life style and home environmental exposures are important risk factors for asthma and allergy in Northeast Texas children.     

上海玻璃博物馆

G+玻璃主题园概念的诞生上海轻工玻璃有限公司计划在上海玻璃工厂的原址上打造一个全新的玻璃博物馆。老园区内分布着30栋不同年代、规模各异的建筑。logon(罗昂)为园区制定了20年的发展策略,并重新命名为G+玻璃主题园区(玻璃、艺术、研究和技术园区)。     

Form finding methodology for force-modelled anticlastic shells in glass fibre textile reinforced cement composites

The reinforcement of a specifically developed fine grained cement matrix with glass fibre textiles in high fibre volume fractions creates a fire safe composite that has-besides its usual compressive strength-an important tensile capacity and omits the need for any steel reinforcement. Strongly curved shells made of textile reinforced cement composites (TRC) can cover medium (up to 15 m) span spaces with three times smaller shell thicknesses than conventional steel-reinforced concrete shells. This paper presents a methodology to generate force-modelled anticlastic shell shapes that exploit both the tensile and compressive load carrying capacities of TRC. The force-modelling is based on the dynamic relaxation form finding method developed for gravity (in this case self-weight) loaded systems. The potential of the presented methodology to develop structurally sound anticlastic shell shapes is illustrated by four case studies.     

Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure

This article deals with the experimental and numerical blast study on a single empty recyclable metal beverage can. The idea is to make a macro-foam (sacrificial cladding structure) out of these cans to protect the main load bearing members of civil engineering structures from the air blast load. Close-range free air blast tests have been conducted to understand the crushing behaviour and the energy absorption of a single empty beverage can in detail. To conduct such an air blast test a special small-scale test set-up was designed and manufactured. The effect of skin plate surface area and its nature on the blast parameters is studied. Furthermore, the effect of inertia of the skin plate on the crushing performance of the beverage can is evaluated. Tests have been conducted with different plates (made of aluminium and sandwich composite materials) with different masses which represent the skin plate of the proposed sacrificial structure. The measured blast parameters from the experimental tests were compared with ConWep predicted data. Furthermore, the influence of the finite surface area of the skin plate on the clearing of the reflected pressure waves was also studied. The deformation behaviour and the corresponding energy absorption of empty beverage cans were captured. During the experimental blast tests it was observed that a part of the total reflected impulse (∼30%) was lost before it transfers to the non-sacrificial structure. Hence, in order to investigate this phenomenon Eulerian-Lagrangian coupled analyses were conducted using Hydrocodes. The results from these analyses showed that the diffraction and ground reflected pressure wave caused the loss in impulse. The results from the numerical studies have been compared and validated with the experimental results.     

The daylighting dashboard – A simulation-based design analysis for daylit spaces

This paper presents a vision of how state-of-the-art computer-based analysis techniques can be effectively used during the design of daylit spaces. Following a review of recent advances in dynamic daylight computation capabilities, climate-based daylighting metrics, occupant behavior and glare analysis, a fully integrated design analysis method is introduced that simultaneously considers annual daylight availability, visual comfort and energy use: Annual daylight glare probability profiles are combined with an occupant behavior model in order to determine annual shading profiles and visual comfort conditions throughout a space. The shading profiles are then used to calculate daylight autonomy plots, energy loads, operational energy costs and green house gas emissions. The paper then shows how simulation results for a sidelit space can be visually presented to simulation non-experts using the concept of a daylighting dashboard. The paper ends with a discussion of how the daylighting dashboard could be practically implemented using technologies that are available today.     

Energy policy scenarios to reach challenging climate protection targets in the German electricity sector until 2050

In this article we demonstrate how challenging greenhouse gas reduction targets of up to 95% until 2050 can be achieved in the German electricity sector. In the analysis, we focus on the main requirements to reach such challenging targets. To account for interdependencies between the electricity market and the rest of the economy, different models were used to account for feedback loops with all other sectors. We include scenarios with different runtimes and retrofit costs for existing nuclear plants to determine the effects of a prolongation of nuclear power plants in Germany. Key findings for the electricity sector include the importance of a European-wide coordinated electricity grid extension and the exploitation of regional comparative cost effects for renewable sites. Due to political restrictions, nuclear energy will not be available in Germany in 2050. However, the nuclear life-time extension has a positive impact on end consumer electricity prices as well as economic growth in the medium term, if retrofit costs do not exceed certain limits.     

Bubble attachment time and FTIR analysis of water structure in the flotation of sylvite, bischofite and carnallite

Water structure is the most important parameter that influences the flotation of soluble salts. In this paper bubble attachment time measurements and FTIR analyses were performed to investigate the effect of water structure on the flotation behavior of sylvite (KCl), bischofite (MgCl₂·6H₂O) and carnallite (KMgCl₃·6H₂O). The results from bubble attachment time measurements suggest that collector adsorption at the surface of KCl induces flotation with either the cationic collector, ODA, or anionic collector, SDS. In contrast bubble attachment did not occur for bischofite (MgCl₂·6H₂O) or carnallite (KMgCl₃·6H₂O). Results show that the surface charge is not a determining factor in the flotation of soluble salts.Further, the interaction between water molecules and the three chloride salts dissolved in aqueous solution were studied by measuring the shift in the hydrogen-bonding of water molecules. The results indicate that KCl is a structure breaker salt, while MgCl₂·6H₂O and KMgCl₃·6H₂O are structure maker salts.Viscosities for the brines of these three salts were determined. The results give additional evidence of differences in water structure and are in good agreement with the FTIR and bubble attachment results. The findings provide further evidence that water structure plays an important role in the flotation of soluble salts.