Simulating convective die heating for forgings and pressure casting

A comparison is made of die temperature uniformity for two heating configurations: electric air heating and flame heating. The temperature uniformity with electric air heating is noted to be substantially superior to flame heating of large dies. The simulation results are compared with experimentally obtained numbers and found to be in agreement.     

Preparation of poly(2,6-dimethyl-1,4-phenylene ether) (PPE)/epoxy laminate with functionalized PPE resin

Thermal expansion property at 288°C and methylene chloride resistance of poly(2,6-dimethyl-1,4-phenylene ether (PPE)/epoxy laminate were found to be affected by the functionality on PPE resin. Nonlofting PPE/epoxy laminates were prepared with the PPE grafted with fumaric acid or the PPE having (di-n-butylamino) methyl substituent on the polymer backbone. Employing vacuum-vented PPE extrudate or phenol-redistributed PPE was also effective in improving the PPE/epoxy laminate properties. Attempts to preparing a real PPE/epoxy interpenetrating network as the matrix material for the laminate were also made by incorporating both PPE crosslinker and epoxy curing catalysts in the same formulation. © 1993 John Wiley & Sons, Inc.     

On a qualitative relationship between degree of inhomogeneity and cold crushing strength of refractory castables

The influence of the spatial arrangement of aggregates on the cold crushing strength (CCS) of refractory castables is studied by means of methods of point process statistics. Two series of self-flowing refractory castables differing in the kind of aggregates used (tabular alumina, corundum balls) are analysed using quantitative image analysis and methods of spatial statistics. Their spatial variability is described by means of the pair correlation function (pcf) and the density function of the nearest neighbour distance (nnd) distribution. It is shown that both characteristics, pcf and nnd, are in close correlation with CCS.     

iMobile EE – An Enterprise Mobile Service Platform

iMobile is an enterprise mobile service platform that allows resource-limited mobile devices to communicate with each other and to securely access corporate contents and services. The original iMobile architecture consists of devlets that provide protocol interfaces to different mobile devices and infolets that access and transcode information based on device profiles. iMobile Enterprise Edition (iMobile EE) is a redesign of the original iMobile architecture to address the security, scalability, and availability requirements of a large enterprise such as AT&T. iMobile EE incorporates gateways that interact with corporate authentication services, replicated iMobile servers with backend connections to corporate services, a reliable message queue that connects iMobile gateways and servers, and a comprehensive service profile database that governs operations of the mobile service platform. The iMobile EE architecture was also extended to provide personalized multimedia services, allowing mobile users to remotely control, record, and request video contents. iMobile EE aims to provide a scalable, secure, and modular software platform that makes enterprise services easily accessible to a growing list of mobile devices roaming among various wireless networks.     

Solar cells consisting of phenazine dyes in polymer matrix

We have constructed p−n heterojunction solar sandwich cells with phenazine dyes in a thin film of polyvinyl alcohol placed between a conducting glass coated with indium oxide and a platinum foil. The current-voltage relations of the cells have been measured in the dark and light under both forward and reverse biases.     

Determination of PCBs in fatty tissues by means of several detection techniques

Difficulties with harmonization of analytical procedures and consequently poor comparability of generated data represent in the Czech Republic the main reason for the delay in issuing of updated legislation for polychlorobiphenyls (PCBs) in foodstuffs. This study draws attention to possible errors (overestimations) that can occur during routine determination of these residues in the fat portion of biotic matrices. We demonstrate the gas Chromatographic (GC) conditions under which interfering contaminants such as phthalates and/or chlorinated pesticides can be separated from analytes. Discussion is focused on the advantages and drawbacks of GC with an electron capture detector, GC mass spectrometry and GC with an atomic emission detector. Various approaches used for calculation of PCBs contents are compared.

---

Bestimmung der PCB in Fettgeweben mittels verschiedener Detektionstechniken

Zusammenfassung Das Problem mit der Harmonisierung der analytischen Verfahren und der geringen Vergleichbarkeit der Angaben ist ein Hauptgrund der Verspätung in der neuen Legislative für PCB in Lebensmitteln in der Tschechischen Republik. Die Arbeit beschreibt die möglichen Fehler (Falsch-positive Fehler), die durch die routinierte Bestimmung von PCB-Rückständen in Fettanteilen der biologischen Materialien auftreten können. Es werden die gaschromatographischen Bedingungen beschrieben, unter denen die Interferenzen, wie z. B. Phthalaten und chlorierten Pesticiden, von Stoffen abgetrennt werden können. Die Vorteile und Nachteile der Methoden GC-ECD, GC-MS und GC-AED werden diskutiert. Die verschiedenen für die Kalkulation des PCB-Gehaltes angewendeten Annäherungen werden miteinander verglichen.

     

Hall effects on hydromagnetic flow over an impulsively started porous plate

Summary An exact solution has been obtained for the problem of Hall effects on the hydromagnetic flow due to an impulsive start of a porous flat plate. It is observed that in the initial stages there is no inertial oscillation while at large time the steady state is reached through inertial oscillations. The time to attain the steady state increases with increase in Hall parameter.

---

Hall-Effekte bei hydromagnetischer Strömung über eine impulsartig gestartete Platte

Zusammenfassung Für das Problem der Hall-Effekte bei der hydromagnetischen Strömung, durch den impulsartigen Start einer porösen, ebenen Platte, wurde eine exakte Lösung erhalten. Es wird beobachtet, daß im Anfangszustand keine Trägheitsschwingung auftritt, wogegen nach längerer Zeit der stationäre Zustand durch Trägheitsschwingungen erreicht wird. Die Zeit um den stationären Zustand zu erreichen, wächst mit dem Anwachsen der Hall-Parameter an.

---

---

With 2 Figures     

Precautionary Money Demand in a Cash-in-Advance Economy with Capital

We use a stochastic cash-in-advance model with capital to analyze the behavior of economic agents with respect to a precautionary money demand. We show that the conditions under which agents demand more money than they actually spend in the shopping session differ according to the agent’s utility function parameter. When agents are highly risk averse, the precautionary money demand may arise under low technology shocks. The circumstances under which a nonbinding cash-in-advance constraint may appear are reversed in a model without capital. The reason of observed differences is the possibility of converting a fraction of output into capital, not only into real balances.JEL Classification: E41; E47     

Gram-scale synthesis of soluble, near-monodisperse gold nanorods and other anisotropic nanoparticles

An aqueous surfactant-based colloidal chemical method is reported for the synthesis of anisotropic noble-metal nanoparticles on the milligram to multigram scale. Fine control of the nucleation-growth kinetics and rodlike micelle-induced breaking of symmetry at the early stage of particle growth are responsible for high-quality anisotropic nanoparticles. Near-monodisperse gold and silver nanorods, spheroids, nanowires, platelets, or cubes of 4-50 nm dimension and controllable aspect ratio can be prepared. The method may also be extended to semiconductor systems.