Analyse von Lkw-Überholmanövern auf Autobahnen für die Entwicklung kooperativer Fahrerassistenzsysteme

Forschung im Ingenieurwesen - Lkw-Überholmanöver auf Autobahnen können Konfliktsituationen provozieren. Das lange Blockieren der Überholspur und plötzliche Ausscheren kann...     

Pretreatment of Highly Polluted Pharmaceutical Waste Broth by Wet Air Oxidation

The preoxidation of a highly polluted waste pharmaceutical fermentation broth using wet air oxidation (WAO) has been studied as a possible method for the effective removal of organics. The applied (pre)treatment method should enhance the biotreatability of the pharmaceutical fermentation broth in terms of reduced initial toxicity and higher biodegradability. Preliminary experiments in the pilot biological treatment plant were successful only at low organic loads, whereas the system collapses at higher ones. The characterization of the fermentation broth was started by common physicochemical analysis, whereas several bioassays were used to determine its impact on biological treatment plants and the environment. Toxicity prior to and after WAO was determined using the acute Vibrio fischeri test, measurement of inhibition of O2 consumption, and the Daphnia magna acute test. Ready biodegradability of the treated and untreated broth has also been assessed. WAO experiments were accomplished in the 2?L batch reactor at different temperatures (240/280°C) and operating pressures. WAO experiments confirmed reduction of the toxicity toward microorganisms, whereas oxidized wastewater was more toxic to daphnids. Biodegradability of the oxidized broth has also been enhanced. Further work has been focused on designing appropriate combination of WAO and biological processes.     

Normality and impairment following profound early institutional deprivation: A longitudinal follow-up into early adolescence.

Longitudinal analyses on normal versus impaired functioning across 7 domains were conducted in children who had experienced profound institutional deprivation up to the age of 42 months and were adopted from Romania into U.K. families. Comparisons were made with noninstitutionalized children adopted from Romania and with nondeprived within-U.K. adoptees placed before the age of 6 months. Specifically, the validity of the assessment, the degree of continuity and change in levels of functioning from 6 to 11 years, and the factors in the pre- and postadoption environment accounting for heterogeneity in outcome were examined. Pervasive impairment was significantly raised in children experiencing institutional deprivation for ≥6 months of life, with a minority within this group showing no impairment. There was no additional significant effect of duration of deprivation beyond the 6-month cutoff, and few other predictors explained outcome. The pattern of normality/impairment was mainly established by 6 years of age, with considerable continuity at the individual level between 6 and 11 years. The findings are discussed in terms of the possibility of a sensitive period for development. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Referenzprozesse für elektronische Ausschreibungen aus Sicht des industriellen Einkaufs

Many companies and purchasing departments only possess a limited knowledge about the modelling of inter-company business processes for electronic procurement. In the past the discussion about electronic procurement was mostly focused on technical aspects. This article introduces a reference process model for procurement auctions. The process model is made up of a basic process, which describes a minimal process for procurement auctions, and a number of process alternatives, which allow for the adoption of the basic process to changing parameters and individual company requirements.     

Thermal and mechanical properties of epoxy composites reinforced by a natural hydrophobic sand

If a low weight percentage of crude fine fillers can improve properties of polymer materials directly without complicated chemical treatment process involved, it will be significant for many industrial applications. Our previous study indicated that a kind of Cancun natural sand could be an effective filler material for polymer composites. In this current work, the epoxy composites reinforced by this kind of natural sand particles were prepared and thermal and mechanical properties of the composites containing up to 5 wt % of the sand particles were characterized. Results showed that the highest flexural strength appears in the epoxy composite containing 1 wt % sand particles. A damage model was used to interpret the flexural properties, which showed an acceptable agreement with the experimental results. The glass transition temperature, high temperature storage modulus, and dimensional stability of the sand/epoxy composites monotonically increased with the addition of the sand particles. The sand particle/epoxy composites also displayed a noticeable enhancement in thermal conductivity. Theoretical analysis showed that in addition to conduction, other heat transport mechanisms played roles in the improved heat transmission through the composites. As a natural porous micron-scale material, Cancun sand has the potential for applications in cost-effective composites with enhanced mechanical and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Hartstoffschichten für das Pressen und Prägen von Gläsern bei hohen Temperaturen

Hard and wear resistant coatings for the moulding and embossing of glasses at elevated temperatures Hard and wear resistant coatings of Titanium Aluminium Nitride TiAlN were deposited on various substrates by the application of different reactive deposition processes: RF-magnetron-sputtering, ion beam-sputtering and by the energetic cluster impact (ECI) process. The deposition of the coatings was performed under variation of biasing conditions and of process parameters such as pressures and flow rates of the process gases argon and nitrogen as well as of energies of species hitting the substrate surfaces. The microstructure particularly the growth morphology of several films was investigated by pictures of film cross sections recorded by transmission electron microscopy. Residual intrinsic film stresses were analyzed by measuring deflections of substrates in an interference optical microscope before and after the deposition of the coatings. By heating coated substrates and in-situ observation of deflections at elevated temperatures dependencies of thermally induced stresses on temperatures and variations of intrinsic stresses due to changes within the films could be analyzed and related to microstructure and growth conditions. In the paper specific characteristics of the deposition processes occuring on the scale both of atoms and of clusters which may contain several thousand of atoms are described and related to microstructure, residual stress states and damaging conditions. Different contributions to residual film stresses are analyzed on the base of theoretical considerations taking into account deposition kinetics and thermomecanical properties. The significance of achieved film properties for application, i. e. for the coating of tools for the manufacturing of optical components by moulding and embossing of glasses is discussed.