Corrosion-passivation processes in a cellular automata based simulation study

A short survey of cellular automata based models for corrosion and passivation phenomena is given. Results of simulations based on the model of spatially separated anodic and cathodic reactions are presented for a cavity development from a point-like damage of a protective layer and from an initially flat unprotected surface. We show some new peculiar examples of the symmetry breaking in the cavity development. The results for the initially flat surface show roughening of the surface at the beginning of the corrosion process. After that, pit merging causes a resmoothing of the surface. An oscillatory behavior of the surface roughness is observed caused by a peninsula formation with subsequent island detachment. These results are obtained in 2D because of computational limitations. We plan simulations in 3D and point out the problems we encounter in their realization.     

Wetting and Interfacial Chemistry of SnZnCu Alloys with Cu and Al Substrates

Wetting of Cu and Al pads by Sn-Zn eutectic-based alloys with 0.5, 1, and 1.5 wt.% of Cu was studied at 250 °C, in the presence of ALU33® flux, with wetting times of 15, 30, 60, and 180 s, respectively. With increasing wetting time the wetting angle decreases only slightly and the angles on Cu pads are higher than those on Al pads. Selected, solidified solder-pad couples were cross-sectioned and subjected to SEM-EDS study of the interfacial microstructure. The results revealed that the microstructure of the SnZnCu/Cu interface is much different from SnZnCu/Al interface. In the first case continuous interlayers are observed while in the latter case there is no interlayer but the alloy dissolves the substrate along grain boundaries.     

Approximation of a multivariable sensor characteristic applied to the carbon monoxide sensor

The transducer applied in sensors and measurement systems often have non-linear characteristics, which may depend on additional factors as temperature, humidity gases flow, etc. Therefore, it is important to find the function describing the dependence between input and output values of a transducer which takes into account all the influencing factors. This paper shows a method which, basing on measured data, allows to establish a multi-variable transducer transfer function.     

Numerical modelling of radiative heat transfer in an internal indirect reforming-type SOFC

The present paper describes numerical modelling of the radiative heat transfer process in the module chamber of an internal indirect reforming-type SOFC. The ability to do internal reforming is one of the characteristics of high-temperature fuel cells, SOFC. As in any high-temperature system, radiative heat transfer is important. In this article, heat transfer between the fuel reformer surface and all other surfaces facing the reformer surfaces is modelled. Governing equations for radiative heat transfer are described using Hottel's zone method. The resulting radiation–conduction conjugate heat transfer problems are numerically solved with a combination of Gauss–Seidel and Newton–Raphson methods. The steam reforming reaction occurring inside the fuel reformer is described using Achenbach model. The obtained results indicate that, for the development of effective indirect internal reforming, the position of the reformer in the module chamber and emissivity of the surfaces of the reformer, cell and other elements in the SOFC module all play a key role.     

Solid-state spun fibers and yarns from 1-mm long carbon nanotube forests synthesized by water-assisted chemical vapor deposition

We report continuous carbon nanotube (CNT) fibers and yarns dry-drawn directly from water-assisted chemical vapor deposition (CVD) grown forests with about 1-mm height. As-drawn CNT fibers exist as aerogel and can be transformed into more compact fibers through twisting or densification with a volatile organic liquid. CNT fibers are characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, Raman microscopy, and wide-angle X-ray diffraction. Mechanical properties and electrical conductivity of the post-treated CNT fibers are investigated. The resulting fibers show the work of rupture of 30 J/g and DC electrical conductivity of 5.0 × 10⁴ S/m.     

Reconstruction of nonuniformly sampled images in spline spaces.

This paper presents a novel approach to the reconstruction of images from nonuniformly spaced samples. This problem is often encountered in digital image processing applications. Nonrecursive video coding with motion compensation, spatiotemporal interpolation of video sequences, and generation of new views in multicamera systems are three possible applications. We propose a new reconstruction algorithm based on a spline model for images. We use regularization, since this is an ill-posed inverse problem. We minimize a cost function composed of two terms: one related to the approximation error and the other related to the smoothness of the modeling function. All the processing is carried out in the space of spline coefficients; this space is discrete, although the problem itself is of a continuous nature. The coefficients of regularization and approximation filters are computed exactly by using the explicit expressions of B-spline functions in the time domain. The regularization is carried out locally, while the computation of the regularization factor accounts for the structure of the nonuniform sampling grid. The linear system of equations obtained is solved iteratively. Our results show a very good performance in motion-compensated interpolation applications.     

Synthesis and characterization of carbonaceous replicas of multilayered vesicular siliceous materials

Synthesis of novel, carbon porous replicas of vesicular siliceous materials has been described. The original siliceous materials consist of small, spherical structures resembling onions, known in the literature as multilamellar vesicles (MLVs). They have been characterized with a number of analytical methods that allow one to determine its 3-D structure and basic parameters of the pore system. Carbonaceous materials, made similarly of onion-like porous structures, have been obtained using a standard procedure to form replicas. They have been characterized by the same methods as those applied to the parent materials.     

The impact of a sewage treatment plant's effluent on sediment quality in a small bay in Lake Geneva (Switzerland–France). Part 2: Temporal evolution of heavy metals

The Bay of Vidy is the most contaminated area of Lake Geneva, Switzerland, as a result of the release of treated and untreated waste water from the municipal sewage treatment plant of the city of Lausanne and its surroundings. The reconstruction of the historical deposition of heavy metals in the sediment of the bay has been performed by the analysis of several dated (radiocaesium) sediment cores. The presence of sewage‐derived contaminants in the Bay of Vidy since the beginning of the sewage treatment plant's operations in 1964 is clearly observed, when a sharp increase in heavy metal contents is recorded, with maximum concentrations of cadmium, copper, zinc and lead occurring between the late 1960s and early 1970s. Despite considerable improvement in recent times, the present concentrations of the investigated heavy metals in sediments of the Bay of Vidy are still higher than concentrations measured at the centre of the lake, the latter close to Lake Geneva's natural background values. It is concluded that the quantity of heavy metals deposited in the bay is considerable and, because of sediment instability, will constitute a potential hazard for biota.     

Interfacial reactions of Sn–Zn–Ag–Cu alloy on soldered Al/Cu and Al/Al joints

This work shows the effect on the soldering process of the addition of Ag and Cu to Sn–Zn alloys. Soldering of Al/Cu and Al/Al joints was performed for a time of 3?min, at a temperature of 250°C, with the use of flux. Aging was carried out at 170°C for Al/Cu and Al/Al joints for 1 and 10 days. During the aging process, intermetallic layers grew at the interface of the Al/Cu joint at the Cu substrate. Intermetallic layers were not observed during wetting of Al/Al joints. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed. The experiment was designed to demonstrate the effect of Ag and Cu addition on the dissolution of Al substrate during the soldering and aging processes. In the solder alloys, small precipitates of AgZn₃ and Cu₅Zn₈ were observed.     

Suspension flow in crystallizers with and without hydraulic classification

The main goal of this paper is to model a multiphase flow of a monodispersed suspensions in various types of crystallizers: Draft Tube Magma (DTM), Double Draft Tube (DDT) and Fluidized bed (FL). To do this, the CFD (Computational Fluid Dynamics) methods were used. The geometry of model apparatus was similar to those applied in industry. The composition of suspensions and their physical properties were the same as in practical cases.