Efficient current reuse for low-power transceivers

Current boosting is a method where the performance of an active circuit block is optimized by placing a constant current source in parallel with the active signal path to provide optimal biasing for different components. In this paper, a technique to replace the constant dc current source with active building blocks typically required in transceivers is proposed. By using this method the total current consumption of the transceiver can be efficiently reduced without modifying its performance. A design example where the proposed technique reduces the receiver current consumption by 45% is given.     

Nanocrystalline WC-Co HVAF Coatings by Utilizing Novel Powder Manufacturing Route Using Water-Soluble Raw Materials

In this study, nanostructured WC-Co coatings were produced using experimental nanocrystalline WC-12Co and WC-24Co powders produced by a novel chemical synthesis route. Test coatings were produced using HVAF spraying keeping the temperature as low as possible during the deposition in order to avoid decomposition of the nanocarbides. In experimental powders, two different Co incorporation methods were used: a conventional way in which cobalt was incorporated as a metallic Co powder and a chemical synthesis way in which cobalt acetate was used as a cobalt source. When using cobalt acetate, it decomposes to metallic cobalt during the process. Experimental powders in which cobalt acetate has been used as cobalt source resulted poor deposition efficiency. With warmer parameters, powders resulted better DE, but significant WC decarburization and the dissolution into the matrix phase occurred. Powders in which Co has been introduced as Co powder showed enhanced DE enabling spraying with decreased temperature and higher particle velocity, resulting in coatings with less WC decomposition. Especially, an experimental powder in which Co has been incorporated both as Co powder and as Co-Ac results very fine nanocarbide structure with significantly less WC decomposition having a hardness value of 1201 HV0.3, even with 24% Co.     

Previously uncultured β-Proteobacteria dominate in biologically active granular activated carbon (BAC) filters

Bacteria colonizing BAC filters used in drinking water purification from lake water were characterized by morphology, physiological tests, whole cell protein profiles and PLFA (phospholipid fatty acid) composition, and identified by partial 16S rRNA gene sequencing. Epifluorescence revealed prothecate bacteria to dominate in BAC. The majority of the isolates belonged to order Burkholderiales of β-Proteobacteria, a few to Comamonadaceae but the majority to an undescribed family and the related sequences belonged mainly to uncultured bacteria. Among the less common α-Proteobacteria the genus Sphingomonas and the genera Afipia, Bosea or Bradyrhizobium of the Bradyrhizobiaceae family were detected. The majority of cultured bacteria persisting in the BAC biofilter were Burkholderiales, which according to ecological information are efficient in the mineralisation of dissolved organic matter in BAC. The biotechnical potential of the previously uncultured dominant bacteria warrants to be further studied.     

On the Correlation of Effective Terahertz Refractive Index and Average Surface Roughness of Pharmaceutical Tablets

In this paper, we have studied terahertz (THz) pulse time delay of porous pharmaceutical microcrystalline compacts and also pharmaceutical tablets that contain indomethacin (painkiller) as an active pharmaceutical ingredient (API) and microcrystalline cellulose as the matrix of the tablet. The porosity of a pharmaceutical tablet is important because it affects the release of drug substance. In addition, surface roughness of the tablet has much importance regarding dissolution of the tablet and hence the rate of drug release. Here, we show, using a training set of tablets containing API and with a priori known tablet’s quality parameters, that the effective refractive index (obtained from THz time delay data) of such porous tablets correlates with the average surface roughness of a tablet. Hence, THz pulse time delay measurement in the transmission mode provides information on both porosity and the average surface roughness of a compact. This is demonstrated for two different sets of pharmaceutical tablets having different porosity and average surface roughness values.     

Nanoparticle Deposition from Liquid Flame Spray onto Moving Roll-to-Roll Paperboard Material

Nanostructured coatings have been prepared on a flexible, moving paperboard using deposition of ca. 40-nm-sized titanium dioxide nanoparticles generated by a liquid flame spray process, directly above the paperboard, to achieve improved functional properties for the material. Properties such as surface wettability can be extensively improved by a thin layer of nanoparticles on the substrate. Owing to the vulnerability to heat, the substrate needs to be moved rapidly through the flame. This, on the other hand, generates a setting for a roll-to-roll coating process, which favors upscaling of the method. In this article, we characterize the flame process for nanoparticle coating and quantify the operational window for this method. The amount of deposited material as a function of substrate speed through the flame is discussed. Although the thermophoretic flux of nanoparticles is estimated to be very high from the hot flame onto the cold substrate, other factors were observed to limit the deposited amount of particles. Total mass yields of 5%–20% of the injected precursor material into the titanium dioxide nanocoating on the paperboard were achieved. With these yields, a highly hydrophobic surface was obtained by a mass loading of 10–50 mg/m² of titanium dioxide on the paperboard.     

para‐Substituted 2‐Phenyl‐3,4‐dihydroquinazolin‐4‐ones As Potent and Selective Tankyrase Inhibitors

Human tankyrases are attractive drug targets, especially for the treatment of cancer. We identified a set of highly potent tankyrase inhibitors based on a 2‐phenyl‐3,4‐dihydroquinazolin‐4‐one scaffold. Substitutions at the para position of the scaffold′s phenyl group were evaluated as a strategy to increase potency and improve selectivity. The best compounds displayed single‐digit nanomolar potencies, and profiling against several human diphtheria‐toxin‐like ADP‐ribosyltransferases revealed that a subset of these compounds are highly selective tankyrase inhibitors. The compounds also effectively inhibit Wnt signaling in HEK293 cells. The binding mode of all inhibitors was studied by protein X‐ray crystallography. This allowed us to establish a structural basis for the development of highly potent and selective tankyrase inhibitors based on the 2‐phenyl‐3,4‐dihydroquinazolin‐4‐one scaffold and outline a rational approach to the modification of other inhibitor scaffolds that bind to the nicotinamide site of the catalytic domain.     

Data analysis tool for comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry

Data processing and identification of unknown compounds in comprehensive two-dimensional gas chromatography combined with time-of-flight mass spectrometry (GC×GC/TOFMS) analysis is a major challenge, particularly when large sample sets are analyzed. Herein, we present a method for efficient treatment of large data sets produced by GC×GC/TOFMS implemented as a freely available open source software package, Guineu. To handle large data sets and to efficiently utilize all the features available in the vendor software (baseline correction, mass spectral deconvolution, peak picking, integration, library search, and signal-to-noise filtering), data preprocessed by instrument software are used as a starting point for further processing. Our software affords alignment of the data, normalization, data filtering, and utilization of retention indexes in the verification of identification as well as a novel tool for automated group-type identification of the compounds. Herein, different features of the software are studied in detail and the performance of the system is verified by the analysis of a large set of standard samples as well as of a large set of authentic biological samples, including the control samples. The quantitative features of our GC×GC/TOFMS methodology are also studied to further demonstrate the method performance and the experimental results confirm the reliability of the developed procedure. The methodology has already been successfully used for the analysis of several thousand samples in the field of metabolomics.     

Photostability and toxicity of pentachlorophenol and phenanthrene

Fate of organic contaminants under UV irradiation as environmental variable was studied. Aqueous solutions of pentachlorophenol and phenanthrene were subjected to simulated solar radiation and monitored during ≤ 93 h. Immobilization tests were conducted using Daphnia magna neonates in pre-irradiated water for the assessment of photoproduct-mediated toxicity. We observed a time-dependent decrease in exposure concentrations following irradiation, which correlated positively with reduced immobilization of the animals. A complete disappearance of the lowest and highest concentrations of pentachlorophenol was noted after 25 h and 75 h, respectively. Survivorship of the animals increased until 100% and correlated positively with irradiation time. However, phenanthrene was rather persistent under irradiation, with less than 25% decline in exposure concentrations after 93 h. Neonates were not immobilized at maximum aqueous solubility of phenanthrene. Rate constants (k) for the photodegradation of pentachlorophenol at 0.41, 0.59, 1.1, and 2.1 mg l(-1) were in the range of 7.2 × 10(-2) and 4.9 × 10(-2)h(-1), showing a slight decrease with increasing initial pentachlorophenol concentration. Nonetheless, pentachlorophenol degradation in the studied concentration range could still be described by the pseudo-first-order kinetics. K values for phenanthrene at 0.12 and 0.22 mg l(-1) were 2.9 × 10(-3)h(-1) and 4.2 × 10(-3)h(-1), respectively.