Analytical study of the additives system in polyethylene

On the basis of standards of identification of substances in the additive system of polyethylene has been performed. Different methods for separation such as adsorption thin-layer chromatography, high-performance liquid chromatography with chemically bounded phases, and gas chromatography have been used. The fir al identification has been made with mass spectrometry. The substances have been extracted from polyethylene with hexane and chloroform.     

Determination of micromechanical properties of a hen’s eggshell by means of nanoindentation

The work describes the suitability and applicability of the nanoindentation method for the determination of the micromechanical properties of a hen’s eggshell. The values of elastic modulus E were monitored in five different locations along the eggshell’s meridian line. Detailed maps of elastic moduli at particular eggshell cross-sections revealed high variations in local values of E-moduli at individual points, but not significant differences of their means at distant parts of the eggshell. Mean values of E-modulus in different meridian positions did not vary significantly and ranged from 47.4 to 53 GPa. Experimental histograms were created of all elastic moduli showing the frequency of their occurrence and these revealed a rather high variation in E-moduli throughout the cross-section. The probability density function can be characterised by a symmetrical shape and the distribution of E-moduli can be approximated with the Gauss distribution. The nanoindentation technique proved to be a suitable, easy-to-use, and powerful tool for assessing local variations of the mechanical properties of hen’s eggshells.     

Mechanochemical synthesis of ternary chalcogenide chalcostibite CuSbS2 and its characterization

Journal of Materials Science: Materials in Electronics - In this work, the very rapid one-step mechanochemical synthesis of nanocrystalline ternary chalcogenide chalcostibite CuSbS2 prepared from...     

Physical,mechanical, and biological properties of electrophoretically deposited lithium-doped calcium phosphates

In the present work, the preparation of sintered lithium-doped tricalcium phosphates was studied, along with their physical, mechanical, and biological properties. Calcium phosphates were shaped via the use of electrophoretic deposition (EPD), using colloidally milled dispersions of hydroxyapatite (HAp) particles. The dispersions were stabilised with monochloroacetic acid. Lithium was incorporated into the structure via an addition of lithium chloride, which also served to optimise the deposition process. The dispersions were milled colloidally for periods of 0–48 h. The colloidal milling resulted in two effects: i) disintegration of the commercial HAp powder (10 µm) agglomerates, ii) unimodal distribution of the HAp particles (~ 170 nm). The fine particles of the milled HAp dispersions accelerated the deposition rate, and increased the mass of the deposit. The reduced size of the initial particles, owed to the milling, led to the superior arrangement of the particles during deposition and to reduced porosity after sintering (1050–1250 °C). The HAp decomposed into tricalcium phosphate phases during sintering. At a sintering temperature of 1250 °C, grain growth occurred, which consequently resulted in a slight degradation of the mechanical properties (reduction in hardness and Young's modulus). In contrast, the hardness and Young's modulus increased as the dispersion milling time increased (smaller grain size after sintering); however, the fracture toughness did not change. The results of the biological testing confirmed the bioactivity of the material through the growth of the apatite layer in the simulated body fluid (SBF), and the biodegradation of the prepared materials in the Tris-HCl solution. With regard to the preparation of compact lithium-doped tricalcium phosphates, the best results were obtained in the case of the sample that utilised the dispersion that was milled for 48 h, and was sintered at 1050 °C.     

Mesenchymal Stromal Cell Therapy in Novel Porcine Model of Diffuse Liver Damage Induced by Repeated Biliary Obstruction

In liver surgery, biliary obstruction can lead to secondary biliary cirrhosis, a life-threatening disease with liver transplantation as the only curative treatment option. Mesenchymal stromal cells (MSC) have been shown to improve liver function in both acute and chronic liver disease models. This study evaluated the effect of allogenic MSC transplantation in a large animal model of repeated biliary obstruction followed by partial hepatectomy. MSC transplantation supported the growth of regenerated liver tissue after 14 days (MSC group, n = 10: from 1087 ± 108 (0 h) to 1243 ± 92 mL (14 days); control group, n = 11: from 1080 ± 95 (0 h) to 1100 ± 105 mL (14 days), p = 0.016), with a lower volume fraction of hepatocytes in regenerated liver tissue compared to resected liver tissue (59.5 ± 10.2% vs. 70.2 ± 5.6%, p < 0.05). Volume fraction of connective tissue, blood vessels and bile vessels in regenerated liver tissue, serum levels of liver enzymes (AST, ALT, ALP and GGT) and liver metabolites (albumin, bilirubin, urea and creatinine), as well as plasma levels of IL-6, IL-8, TNF-α and TGF-β, were not affected by MSC transplantation. In our novel, large animal (pig) model of repeated biliary obstruction followed by partial hepatectomy, MSC transplantation promoted growth of liver tissue without any effect on liver function. This study underscores the importance of translating results between small and large animal models as well as the careful translation of results from animal model into human medicine.     

Conversion kinetics of container glass batch melting

Understanding the batch-to-glass conversion process is fundamental to optimizing the performance of glass-melting furnaces and ensuring that furnace modeling can correctly predict the observed outcome when batch materials or furnace conditions change. To investigate the kinetics of silica dissolution, gas evolution, and primary foam formation and collapse, we performed X-ray diffraction, thermal gravimetry, feed expansion tests, and evolved gas analysis of batch samples heated at several constant heating rates. We found that gas evolving reactions, foaming, and silica dissolution depend on the thermal history of the batch in a similar manner: the kinetic parameters of each process were linear functions of the square root of the heating rate. This kinetic similarity reflects the stronger-than-expected interdependence of these processes. On the basis of our results, we suggest that changes in furnace operating conditions, such as firing or boosting, influence the melting rate less than what one would expect without consideration of batch conversion kinetics.     

A novel multiscale approach to brittle fracture of nano/micro‐sized components

Principles and advantages of a new concept based on the ab initio aided strain gradient elasticity theory are shown in comparison with the classical Barenblatt cohesive model. The method is applied to the theoretical prediction of the critical energy release rate and the crack tip opening displacement at the crack instability in nanopanels made of germanium and molybdenum crystals. The necessary length scale parameter l₁ is determined for germanium and molybdenum by the best gradient elasticity fits of ab initio computed screw dislocation displacements and phonon dispersions. Values of ab initio computed critical energy release rates and crack opening profiles revealed that the length l₁ is related to inflexion points of profiles. A novel ab initio method in combination with continuum mechanics was successfully tested to replace molecular statics dependent of availability of interatomic potentials. The asymptotic strain gradient elasticity solution for displacement components near the crack tip in materials with cubic lattice was also derived.     

The putative Saginaw impact structure,Michigan, Lake Huron,in the light of gravity aspects derived from recent EIGEN 6C4 gravity field model

The hypothetical impact structure in the Saginaw Bay (Michigan, USA, Lake Huron) has been tested by the gravity data derived from the recent gravity field model EIGEN 6C4 (expanded to degree and order 2190, with ground resolution of ~9?km). The following gravity field aspects were used: the gravity disturbances/anomalies, second derivatives of the disturbing potential (Marussi tensor), two of three gravity invariants, their specific ratio (known as 2D factor), the strike angles, and the virtual deformations. These gravity aspects are sensitive in various ways to the underground density contrasts. For the Saginaw Bay area, we confirm that we do not see any typical impact crater in terms of gravity disturbance or the radial second order derivative, possibly because of the thick layer of the ice located at the place and time of the impact. But the “combed” strike angles (one type of the gravity aspects we use) disclose a trace of high pressure to the SE/S/SW of the Bay and may be due to an impacting body. Thus, we provide circumstantial evidence of the Younger Dryas impact hypothesis.