Mechanische Holzverwertung,Holzindustrie

Ohne Zusammenfassung     

Variation in fatty acid composition of ewes' colostrum and mature milk fat

Temporal content variations of approximately 70 C4–C24 fatty acids (FA) in colostrum and milk of ewes consuming winter diet were determined by gas chromatography. The content of monounsaturated, polyunsaturated and straight-chain saturated FA 14:0–16:0 in colostrum was higher whereas the content of 4:0–12:0, 18:0 and branched-chain saturated FA 15:0–17:0 was lower than that in mature milk. The effect of ewe breed on the FA profiles was not significant. The composition of FA changed most significantly 1–2 days after lambing in agreement with the time schedule of colostrum formation. Nevertheless, the content of FA further successively changed up to approximately the 6th day of lactation, whereas further changes up to the 60th day of lactation were smaller. This is consistent with the recommendation that ewes' milk is suitable for human consumption after six-to-eight days of lactation. The higher contents of palmitic and myristic acids in colostrum compared with mature milk suggest that FA composition in colostrum matches the changing needs of the growing lambs.     

Prediction of plastic surface defects for 5-axis ball end milling of Ti-6Al-4 V with rounded cutting edges using a material removal simulation

The resulting surface quality after 5-axis ball end milling is of superior importance because finish milling is often the last process step determining the functional performance of a component. However, the prediction of surface topography is still a challenging task. Especially in ball end milling with the characteristic sickle shaped chip cross section, ploughing effects in the area of low chip thickness result in plastic deformation and surface defects (also known as burr). This paper provides a new approach to predict those surface defects by considering the minimum chip thickness for complex milling engagement conditions within a virtual process design. This allows the choice of suitable process parameters without extensive experimental efforts.     

Acrylic bone cements modified with poly(ethylene glycol)‐based biocompatible phase‐change materials

The high polymerization temperature of acrylic bone cements used in hip replacement implantation may cause thermal necrosis of surrounding tissues. In order to reduce the polymerization temperature, acrylic bone cement has been modified with a biocompatible polymeric phase‐change material (PCM) based on poly(ethylene glycol) (PEG) of different molecular weights and stabilized with potato starch. Structural and morphological studies were performed, and the thermal and mechanical properties were investigated. The incorporation of PEG‐based PCM led to a decrease in the polymerization temperature of bone cement from 70 °C for unmodified cement to 58 °C for modified cement. Modified cement materials were stable in incubation tests, although acoustic analysis data revealed a decrease in propagation speed after incubation, which indicates formation of material defects (pores, cracks, voids, etc.) due to water activity. However, in the regeneration process, these defects can be filled by freshly grown bone tissue leading to better incorporation of bone cement replacements into tissue. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43898.     

Viscosity of glass-forming melt at the bottom of high-level waste melter-feed cold caps: Effects of temperature and incorporation of solid components

During the final stages of conversion of melter feed (glass batch) to molten glass, the glass-forming melt becomes a continuous liquid phase that encapsulates dissolving solid particles and gas bubbles that produce primary foam at the bottom of the cold cap (the reacting melter feed in an electric glass-melting furnace). The glass-forming melt viscosity plays a dominant role in primary foam formation, stability, and eventual collapse, thus affecting the rate of melting (the glass production rate per cold-cap area). We have traced the glass-forming melt viscosity during the final stages of feed-to-glass conversion as it changes in response to changing temperature and composition (resulting from dissolving solid particles). For this study, we used high-level waste melter feeds—taking advantage of the large amount of data available to us—and a variety of experimental techniques (feed expansion test, evolved gas analysis, thermogravimetric analyzer-differential scanning calorimetry, X-ray diffraction, and viscometer). Starting with a relatively low value at the moment when the melt connects, melt viscosity reached maximum within the primary foam layer and then decreased to its final melter operating temperature value. At the cold-cap bottom—the boundary between the primary foam layer and the thermal boundary layer—where physicochemical reactions of a melter feed influence the driving force of the heat transfer from the melt to the cold cap, the melt viscosity affects the rate of melting predominantly through its effect on the temperature at which primary foam is collapsing.     

Synthesis and SAR of Tetracyclic Inhibitors of Protein Kinase CK2 Derived from Furocarbazole W16

The serine/threonine kinase CK2 modulates the activity of more than 300 proteins and thus plays a crucial role in various physiological and pathophysiological processes including neurodegenerative disorders of the central nervous system and cancer. The enzymatic activity of CK2 is controlled by the equilibrium between the heterotetrameric holoenzyme CK2α₂β₂ and its monomeric subunits CK2α and CK2β. A series of analogues of W16 ((3aR,4S,10S,10aS)-4-{[(S)-4-benzyl-2-oxo-1,3-oxazolidin-3-yl]carbonyl}-10-(3,4,5-trimethoxyphenyl)-4,5,10,10a-tetrahydrofuro[3,4-b]carbazole-1,3(3aH)-dione ((+)- 3 a )) was prepared in an one-pot, three-component Levy reaction. The stereochemistry of the tetracyclic compounds was analyzed. Additionally, the chemically labile anhydride structure of the furocarbazoles 3 was replaced by a more stable imide ( 9 ) and N-methylimide ( 10 ) substructure. The enantiomer (−)- 3 a (K_i=4.9 μM) of the lead compound (+)- 3 a (K_i=31 μM) showed a more than sixfold increased inhibition of the CK2α/CK2β interaction (protein-protein interaction inhibition, PPII) in a microscale thermophoresis (MST) assay. However, (−)- 3 a did not show an increased enzyme inhibition of the CK2α₂β₂ holoenzyme, the CK2α subunit or the mutated CK2α′ ^C336S subunit in the capillary electrophoresis assay. In the pyrrolocarbazole series, the imide (−)- 9 a (K_i=3.6 μM) and the N-methylimide (+)- 10 a (K_i=2.8 μM) represent the most promising inhibitors of the CK2α/CK2β interaction. However, neither compound could inhibit enzymatic activity. Unexpectedly, the racemic tetracyclic pyrrolocarbazole (±)- 12 , with a carboxy moiety in the 4-position, displays the highest CK2α/CK2β interaction inhibition (K_i=1.8 μM) of this series of compounds.     

Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.