Dissolution,Transport and Reaction at a DICY/DGEBA Interface

The curing of an epoxy consisting of the solid hardener dicyandiamide (DICY) and the resin diglycidyl ether of bisphenol A (DGEBA) is studied in a system consisting of a tablet of DICY embedded in liquid DGEBA. Dissolution of DICY within the liquid DGEBA in combination with the transport of dissolved DICY from the tablet border into DGEBA and the chemical reaction of both reactants is studied by scanning Brillouin microscopy and infrared spectroscopy. Scanning Brillouin microscopy demonstrates the spatial and temporal evolution of the static and dynamic hypersonic properties in the course of curing in the vicinity of the DICY tablet. Infrared spectroscopy performed on epoxy pieces extracted from the final sample at different distances from the tablet surface give information about the spatial evolution of the curing process. The results achieved by both techniques are finally combined to yield a better understanding of the curing of DICY-based epoxies, which transform upon curing from strongly heterogeneous systems towards increasingly homogeneous systems.     

Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites

ABSTRACT

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO₂) nanoparticles (NP_S) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO₂ nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO₂ nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO₂ NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO₂ nanocomposite films as low cost, lightweight and flexible material for EMI shielding.     

Manufacture and measurement of combinatorial libraries of dielectric ceramics: Part II. Dielectric measurements of Ba1−xSrxTiO3 libraries

Applying combinatorial methods to materials science offers the opportunity to accelerate the discovery of more efficient dielectric ceramics. High-throughput methods have the potential to investigate the effects of a wide range of dopants on the dielectric properties, and to optimise existing systems, encouraging the short innovation cycles that the communications technology industry requires. The London University Search Instrument (LUSI) is a fully automated, high-throughput combinatorial robot that has the potential capability to produce large numbers of sintered bulk ceramic samples with varying composition in 1 day, as combinatorial libraries on alumina substrates. Ba_1−xSr_xTiO₃ (BST) libraries were produced by LUSI as a proof-of-principle, with x = 0–1 in steps of 0.1, and fired to 1350 and 1400 °C for 1 h. Part I of this paper described the manufacture and physical characterisation of BST libraries, showing a regular change in composition with x across the libraries. In this second part, the dielectric properties of BST libraries produced by LUSI are assessed at frequencies between 100 Hz and 1 MHz, and at temperatures between 150 and 500 K. Local piezoelectric properties were also characterised by scanning probe microscope (SPM). All measurements showed evidence of a clear functional gradient varying with x across the library, with measured _r corresponding to expected values for BST.     

Performance of a bioreactor with submerged membranes for aerobic treatment of municipal waste water

Aerobic treatment of municipal waste water in a membrane bioreactor was studied for 535 d. Apart from sampling, sludge was retained completely by a submerged hollow fibre membrane with a pore-size of 0.2 microm. The pilot plant comprised an anoxic zone to enable denitrification. The maximum liquid hold-up of the plant was 3.9 m3. In this study the reactor performance and the stability of the process and the membrane capacity were investigated. A stable flux of 181 m(-2)h(-1) could be realised with a mean transmembrane pressure difference of 0.3bar with air-bubbling and backflushing the membrane and cleaning it in place every two months for one or two hours. For about 140d, a flux of 271 m(-2)h(-1) was achieved, but cleaning became necessary more often. The hydraulic retention time (HRT) varied between 10.4 and 15.6h. Accordingly the volumetric loading rate was between 1.1 and 1.7kg CODm(-3)d(-1). No inoculum was used. The mixed liquor suspended solids (MLSS) concentration gradually increased to 18-20g MLSSl(-1). The feed to microorganism (F/M) ratio varied according to the operation conditions but decreased against a value of 0.07 kg COD kg(-1) MLSSd(-1). Treatment performance was very stable and on a high level. The COD was reduced by 95%. Nitrification was complete and up to 82% of the total nitrogen could be denitrified.     

The live cell irradiation and observation setup at SNAKE

We describe a new setup at the ion microprobe SNAKE (Superconducting Nanoscope for Applied nuclear (Kern-) physics Experiments) at the Munich 14 MV Tandem accelerator that facilitates both living cell irradiation with sub micrometer resolution and online optical imaging of the cells before and after irradiation by state of the art phase contrast and fluorescence microscopy. The cells are kept at standard cell growth conditions at 37 °C in cell culture medium. After irradiation it is possible to switch from single ion irradiation conditions to cell observation within 0.5 s. First experiments were performed targeting substructures of a cell nucleus that were tagged by TexasRed labeled nucleotides incorporated in the cellular DNA by 55 MeV single carbon ion irradiation. In addition we show first online sequences of short time kinetics of Mdc1 protein accumulation in the vicinity of double strand breaks after carbon ion irradiation.     

Nano-Design für Makroschichten

Nano design for macroscopic coatings – new application potentials by PVD coatings up to 100 μm thickness Non-homogeneous coatings still limit the application of thicker layers due to defect growth and irregular layer thickness distribution along the surface of complex shaped components. Therefore, the layer thickness is usually limited to about 10 μm. In order to limit the surface roughness by the growing layer, multilayer coating systems are deposited by highly ionized plasmas. This allows significantly smoother layers to be produced, which until now could only be produced by mechanical finishing. Furthermore, by combining selected material systems and targeted parameter selection, structures can be deposited during coating, especially on edges, which result in a reduction of the cutting edge radius. In future, edge geometries should therefore be able to be specifically adjusted through the coating process.     

Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Understanding continuance usage of mobile shopping applications in India: the role of espoused cultural values and perceived risk

We drew on the unified theory of acceptance and use of technology (UTAUT2) model, and perceived risk construct to propose an integrated model to explain continuance usage of mobile shopping applications. Espoused national cultural values of individualism/collectivism, masculinity/femininity, power distance, uncertainty avoidance, and long-term/short-term orientation act as moderators to examine the influence of within-culture variation on app usage. Findings reveal habit as the strongest predictor of both continuance intention and use behaviour, but interestingly perceived risk did not influence the post-acceptance behaviour of users significantly. Individualism/collectivism, masculinity/femininity, and long-term/short-term orientation espoused cultural values significantly moderated the relationships in the model. Noteworthy theoretical and managerial implications of the research are discussed further.