Trace metals in Phragmites australis and Phalaris arundinacea growing in constructed and natural wetlands

Constructed wetlands with horizontal subsurface flow (HF CWs) designed for treatment of municipal sewage have been monitored extensively with respect to removal of organics, suspended solids, nitrogen, phosphorus and bacteria. However, the information on the removal of various metals and metalloids in these systems is very limited. During the period 2002-2004 aboveground and belowground biomass of Phragmites australis (common reed) and Phalaris arundinacea (reed canarygrass) were sampled in three HF CWs in the Czech Republic. Concentrations of monitored elements in both aboveground and belowground plant tissues were similar to those found in plants growing in natural stands. The concentrations were much lower as compared to those found in plants growing in wetlands receiving acid mine drainage waters, waters from smelters or highway runoff. Concentrations decrease in the order of roots>rhizomes>leaves>stems. The leaf:stem concentration ratios were quite similar for all monitored elements ranging between 1.0 and 1.9. The root:leaf concentration ratio varied widely between 1.5 (Cu) and 54 (Cr) with a mean value of 20.0. Belowground/aboveground plant tissue concentration ratios varied from 2.2 (Cu) to 32 (Cr) with the average value of 9.9.     

Optimal Sensor Networks for Area Monitoring Using Rotating and Beam Sensors

We consider the problem of monitoring the Euclidean plane using rotating sensors with detection sectors and beam sensors. We assume that intruders can appear anywhere at any time and move arbitrarily fast, and may have full knowledge of the sensor network. We require that such intruders be detected within a finite amount of time. We give an optimal network for this problem consisting of a combination of rotating sensors of angle 0 and beam sensors that uses the minimum number of both types of sensors. We show a trade-off between the density of beam sensors needed and the angle of the detection sector of the rotating sensors. Secondly, we give a family of sensor networks using only rotating sensors for the same problem, that demonstrate a trade-off between the detection time and the density of rotating sensors used. We show that the density of rotating sensors required in this case can be significantly reduced by increasing the angle of detection sectors. Finally, we show that our results on the infinite plane can be used to derive sensor networks that monitor some finite regions using a density of sensors that is asymptotically the same, or close to that of the infinite plane case.     

Regeneration of platinum-metal-based catalysts with carboxyphosphines as extractants

Separation of platinum-metal-based homogeneous catalysts was achieved by their conversion to complexes of functionalized phosphines of the general formulae R_3-n P[(CH₂) _x CO₂H)] _n , R = Me, Et, Ph,n = 1, 2, 3,x = 1, 2, and [(HO₂CCH₂)PCH₂]₂, followed by extraction of the complexes into aqueous phase. This approach to regeneration of platinum metals from reaction mixtures after carrying out homogeneously catalyzed reactions was demonstrated on 11 examples of various types of reactions with Ru, Rh, Pd, Os, Ir and Pt compounds as catalysts.     

Epoxy/poly(ɛ‐caprolactone) nanocomposites: Effect of transformations of structure on crystallization

The influence of morphology of the epoxy/poly(?‐caprolactone) (PCL) system and corresponding nanocomposites with organophilized layered silicate on PCL crystallization was studied by differential scanning calorimetry, scanning, and transmission electron microscopy. The results obtained indicate a significant affecting of nonisothermal PCL crystallization by phase morphology brought about by the reaction‐induced phase separation (RIPS) influenced either by various nanoclay contents or the epoxy/PCL ratio. Dispersed morphology of PCL matrix with epoxy globules induces crystallization at higher temperatures. The inverse dispersed morphology of epoxy matrix with PCL inclusions causes crystallization at lower temperature. The co‐continuous morphology induces crystallization in both steps. Rate of the second crystallization step is substantially higher than that in the first step. No nucleation effect has been found in the nanocomposites with the added nanofiller. Multicomponent samples show retarded crystallization, i.e., lower crystallinities and lower overall crystallization rate compared with neat PCL. The results obtained suggest that it is primarily morphological/interfacial effects that play a decisive role in the crystallization behavior of PCL in the epoxy/PCL/clay system. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3197–3204, 2013     

Pyrolysis of brown coal under different process conditions

Pyrolysis tests were performed under laboratory conditions, simulating possible processes in the burning of brown coal mines. These tests focused on gaseous products of thermal decomposition of coal and how their concentrations changed depending on pyrolysis temperature. Results obtained can help to quantify the contributions of particular gases to overall explosiveness of a gaseous mixture and can explain the process of explosive gas release during conflagration.     

Laminated alumina/zirconia ceramic composites prepared by electrophoretic deposition

The electrophoretic deposition of alumina and zirconia powders from isopropanolic suspension in the presence of monochloroacetic acid was studied in the constant-current regime. The different levels of electric current during deposition from 250 μA to 48 mA were used. The green density of the deposit depends on the current density and then on the particle velocity during deposition, reaching values from 58% to 61% according to the electric current used. It was found that the lower the green density of the green deposit, the larger the pores. The low green density led to low final fired density and subsequently to the low Vickers hardness HV5 ranging from 2000 to 1650 depending on electric current used. Based on these findings microlaminates having various thickness ratios to achieve different residual stress levels were prepared consisting of alternating layers of alumina and zirconia.     

Assessment of photovoltaic potential in urban areas using open-source solar radiation tools

This study presents a methodology for the assessment of photovoltaic potential in urban areas using open-source solar radiation tools and a 3-D city model implemented in a geographic information system (GIS). The solar radiation tools are represented by the r.sun solar radiation model and PVGIS estimation utility. The applicability of the methodology has been demonstrated on a selected urban area of a small city in eastern Slovakia. The relevant attributes of buildings have been mapped and implemented in a GIS database. The selected urban area consists of various urban zones characterized by different morphology and functionality. The photovoltaic potential of buildings has been assessed using the PVGIS estimation utility. The analysis has shown a high photovoltaic potential that could cover about 2/3 of current electricity consumption in the city. However, this potential exhibits large spatial and temporal variations caused by global and local factors. This study has also shown that national assessments of photovoltaic potential can be improved by extrapolation of local assessments using spatial databases of urban areas.     

Polyaniline nanotubes: conditions of formation

The courses of aniline oxidation with ammonium peroxydisulfate in aqueous solutions of strong (sulfuric) and in weak (acetic) acids, followed by temperature and acidity changes, are different. In solutions of sulfuric acid, granular polyaniline (PANI) was produced; in solutions of acetic acid, PANI nanotubes were obtained. The external diameter of the nanotubes was 100–300 nm, the internal cavity 20–100 nm, and the length extended to several micrometres. The morphology of PANI, granular or tubular, depends on the acidity conditions during the reaction rather than on the chemical nature of the acid. PANI nanotubes were also produced when aniline was oxidized in the absence of any acid. The bulk conductivity of PANI prepared in solutions of acetic acid was 0.08–0.27 S cm^?1, depending on the acid concentration. Protonated PANI prepared in sulfuric and acetic acids were deprotonated with ammonium hydroxide to obtain PANI bases and the ammonium salt of the protonating acid. FTIR spectroscopy showed the differences in the molecular structure of the PANI bases. Irrespective of whether the polymerization was performed in solutions of sulfuric or acetic acid, PANI had hydrogen sulfate counter‐ions only. The PANI morphology is thus not controlled by the nature of counter‐ions. The acidity of the reaction medium determines the protonation of monomer, oligomer and polymer species. The chemistry of aniline oxidation is likely to be affected especially by the protonation of an intermediate in the pernigraniline form. It is proposed that, in the course of aniline oxidation, pH‐dependent self‐assembly of aniline oligomers predetermines the final PANI morphology. Copyright © 2005 Society of Chemical Industry     

Transport of L-leucine in the fission yeast Schizosaccharomyces pombe

Transport of L -leucine into Schizosaccharomyces pombe cells from the stationary phase of growth (after preincubation for 60 min with 1% glucose) proceeds uphill, practically unidirectionally, and is mediated by at least two systems: a high-affinity system with a K_T of 0·045 mmol 1^?1 and J_max of 3·3 nmol min^?1 (mg dry weight)^?1 and a low-affinity system with a K_T of 1·25 mmol 1^?1 and J_max of 16·0 nmol min^?1 (mg dry weight)^?1. The high-affinity system has a pH optimum at 3.2, the accumulation ratio is highest at a cell density of 2–4 mg dry weight per ml and decreases with increasing leucine concentration. Transport of leucine by the high-affinity system is strongly inhibited by proton conductors, ammonium ions and by most amino acids, but only L -phenylalanine, L -isoleucine, L -valine and L -cysteine behave as fully competitive inhibitors. Systems of L -leucine transport in S. pombe are not constitutive. Transport activity appears only after preincubation of cells with a suitable source of energy. If cycloheximide is added during preincubation with glucose, no transport systems for leucine are synthesized. After removal of glucose, the activity of transport systems decays with a half-time of about 20 min. The presence of cyclic AMP increases the initial rate of leucine uptake only in cells preincubated with glucose and in the absence of cycloheximide.