GutSelf: Interindividual Variability in the Processing of Dietary Compounds by the Human Gastrointestinal Tract

Nutritional research is currently entering the field of personalized nutrition, to a large extent driven by major technological breakthroughs in analytical sciences and biocomputing. An efficient launching of the personalized approach depends on the ability of researchers to comprehensively monitor and characterize interindividual variability in the activity of the human gastrointestinal tract. This information is currently not available in such a form. This review therefore aims at identifying and discussing published data, providing evidence on interindividual variability in the processing of the major nutrients, i.e., protein, fat, carbohydrates, vitamins, and minerals, along the gastrointestinal tract, including oral processing, intestinal digestion, and absorption. Although interindividual variability is not a primary endpoint of most studies identified, a significant number of publications provides a wealth of information on this topic for each category of nutrients. This knowledge remains fragmented, however, and understanding the clinical relevance of most of the interindividual responses to food ingestion described in this review remains unclear. In that regard, this review has identified a gap and sets the base for future research addressing the issue of the interindividual variability in the response of the human organism to the ingestion of foods.     

Post‐protection effect of heat‐resistant insulations on timber‐frame members exposed to fire

In lightweight walls and floors, the load‐bearing timber members are protected by cladding on the sides to form a divider between two fire compartments or to provide appropriate fire protection to the load‐bearing members. The spaces between the timber members can be void or filled with insulation materials. Although a huge number of different insulation materials exist, the most commonly used material is mineral wool insulation. The existing design model for glass wool‐insulated timber‐frame constructions, given in European standard 1995‐1‐2, assumes collapse of the glass wool after failure of the cladding. However, a new form of glass wool insulation, suitable for use at high maximum service temperatures, is now available in the market. The charring phase after the cladding's failure is known as the post‐protection phase. The behaviour of the new heat‐resistant glass wool in the post‐protection phase is similar to that of stone wool and considerably better than that of traditional glass wool. The protective properties of stone wool have changed over the last decades. Charring is one of the main parameters needed to calculate the resistance of a structure to fire. Based on experimental investigations, this paper describes the analysis of the effect of the insulation with regard to its ability to protect timber members against charring during the post‐protection phase. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of mechanically sheared edges of dual phase steels

In recent years advanced high strength steels (AHSS) received increased interest for light structures with improved performance, but they are often sensitive to edge cracking during sheet metal forming. In this study mechanically sheared edges were characterized for three dual phase steels (DP600, DP780 and DP980), sheared with three die clearances (5%t, 10%t, 15%t) and along rolling and transverse directions. Microstructures of the materials were provided first, and then the sheared edges were examined by optical microscopy and scanning electron microscopy that reveal the morphology and random feature of the sheared edges. A factorial analysis was performed to reveal the general trends of the processing parameters on four edge zones. A new strain measurement method was used for characterizing strain distribution in the sheared region, which shows the peak strain to be higher than 3. The strain quickly decreases from sheared edge to interior, leaving a shear-affected zone of about 500 μm or 31% of the thickness. The fracture processes and involved mechanisms were discussed.     

Market penetration analysis of electric vehicles in the German passenger car market towards 2030

There is currently intensive public discussion of fuel cell electric vehicles (FCEV) and other electric powertrains, such as battery electric vehicles (BEV), plug-in hybrid electric vehicles (PHEV) and hybridized combustion engine vehicles (HEV). In this context, the German government has set the target of one million electric vehicles on the road by 2020, and six million by 2030 [1]. The goal of this paper is to identify the possible market share of electric vehicles in the German new car fleet in three scenarios in the timeframe from 2010 to 2030. The VECTOR21 vehicle technology scenario model is used to model the fleet in three scenarios. In the reference scenario with business-as-usual parameters, 189,000 electric vehicles will be sold in Germany by 2020. Scenario two with purchase price incentives from 5000 EUR, high oil prices, and low prices for hydrogen and electricity will result in 727,000 vehicles. In the last scenario with substantial OEM mark-up reductions and external conditions as in the business-as-usual scenario, 3.28 million vehicles will be sold.     

The morphological properties of PP coextruded tape fabrics

In the field of self‐reinforced composites many researchers have focused their attention on the coextruded tapes composed of polypropylene core and PP/PE copolymer skin. Two similar commercial fabrics (P and T) have been compared in respect of their peel resistance. For both materials, peel resistance has a periodic trend that regularly follows fabric weave style. T has demonstrated an average peel resistance and a well‐bonded area slightly greater than P. Skin/core interfacial properties have been investigated and a crosscheck between differential scanning calorimetry (DSC) and Raman spectroscopy has been adopted to understand the influence of skin structure on consolidated laminate. DSC curves exhibit three melting peaks during first heating for both fabrics, corresponding to copolymer, skin/core interface, and core melting. After consolidation at 140°C stretching‐induced superstructure and PP crystallinity degree are preserved. The presence of PP/PE copolymer + PE blend only in fabric P has been pointed out and PE content has been calculated. POLYM. ENG. SCI., 56:727–734, 2016. © 2016 Society of Plastics Engineers     

Conversion of waste polystyrene through catalytic degradation into valuable products

Waste expanded polystyrene (EPS) represents a source of valuable chemical products like styrene and other aromatics. The catalytic degradation was carried out in a batch reactor with a mixture of polystyrene (PS) and catalyst at 450 °C for 30 min in case of Mg and at 400 °C for 2 h both for MgO and MgCO₃ catalysts. At optimum degradation conditions, EPS was degraded into 82.20±3.80 wt%, 91.60±0.20 wt% and 81.80±0.53 wt% liquid with Mg, MgO and MgCO₃ catalysts, respectively. The liquid products obtained were separated into different fractions by fractional distillation. The liquid fractions obtained with three catalysts were compared, and characterized using GC-MS. Maximum conversion of EPS into styrene monomer (66.6 wt%) was achieved with Mg catalyst, and an increase in selectivity of compounds was also observed. The major fraction at 145 °C showed the properties of styrene monomer. The results showed that among the catalysts used, Mg was found to be the most effective catalyst for selective conversion into styrene monomer as value added product.     

Two-step enzymatic reaction for the synthesis of pure structured triacylglycerides

Structured triacylglycerides with medium-chain fatty acids (caprylic acid) in sn1- and sn3-positions and a long-chain unsaturated fatty acid (oleic or linoleic acid) in the sn2-position of glycerol (MLM) were synthesized by lipase catalysis in a two-step process. First, pure 2-monoacylglycerides (2-MG) were synthesized by alcoholysis of triacylglycerides (triolein, trilinolein, or peanut oil) in organic solvents with 1,3-regiospecific lipases (from Rhizomucor miehei, Rhizopus delemar, and Rhizopus javanicus). The 2-MG were purified by crystallization and obtained in up to 71.8% yield. These 2-MG were esterified in a second reaction with caprylic acid in n-hexane to form almost pure MLM. For 2-MG obtained from peanut oil, the final product contained more than 90% caprylic acid in the sn1- and sn3-positions, whereas the sn2-position was composed of 98.5% unsaturated long-chain fatty acids. Reaction conditions for both steps were optimized with respect to source and immobilization of lipase, water activity, and solvent.     

Birefringence–An important property of plastic substrates for magneto-optical storage disks

Birefringence is an important substrate property for optical data storage media. The basic definitions of birefringence and its relation to the chemical nature of polycarbonate are outlined. The polarizability of the monomer unit, expressed in the rheo-optical constant and the degree of remaining polymer chain orientation, determines the level of birefringence in polycarbonate disk substrates. Based on this theory, the theory of blending materials with positive and negative rheo-optical constants Is developed, and the current work with polycarbonate/polystyrene blends is reviewed. The biggest disadvantage of the reviewed system Js that only binary systems with low LCST (lower critical solution temperature) (<240°C) can be formulated. Finally, we report on successful development work of a single-phase blend of a modified polycarbonate with a special styrene-acrylonitrile copolymer. The experimental results are compared with the theoretical expectations, and the implications on the injection molding of disk substrates are discussed.     

Characterization of activated sludge flocs by confocal laser scanning microscopy and image analysis

In this study we present a new approach to determine volumes, heterogeneity factors, and compositions of the bacterial population of activated sludge flocs by 3D confocal imaging. After staining the fresh flocs with fluorescein-isothiocyanate, 75 stacks of images (containing approx. 3000 flocs) were acquired with a confocal laser scanning microscope. The self-developed macro 3D volume and surface determination for the KS 400 software package combined the images of one stack to a 3D image and calculated the real floc volume and surface. We determined heterogeneity factors like the ratio of real floc surface to the surface of a sphere with the respective volume and the fractal dimension (D(f)). According to their significant influence on floc integrity and quality, we also investigated the chemical composition of flocs and quantified their bacterial population structure by using group-specific rRNA-targeted probes for fluorescence in situ hybridization. By a settling experiment we enriched flocs with poor settling properties and determined the above-mentioned parameters. This approach revealed shifts in floc volume, heterogeneity, and bacterial and chemical composition according to the settling quality of the flocs.