Impact of microwave synthesis conditions on the rechargeable capacity of LiCoPO4 for lithium ion batteries

Lithium transition metal phosphates have the capability of improving cathode energy densities up to 800 Wh kg^?1, a 27 % increase over conventional cathode active material energy densities. In this study, the effect of base-to-acid (NH₄OH:H₃PO₄) stoichiometric conditions on the intrinsic reversible capacity of lithium cobalt phosphate (LiCoPO₄) active material are investigated through microwave synthesis and electrochemical testing. Variation in solution pH results in an increase of 69 mAh g^?1 in achievable capacity. X-ray diffraction results show highly crystalline LiCoPO₄, with particle sizes ranging from 200 nm to greater than 1 μm based upon scanning electron microscopy. Electrochemical analysis with 1 M LiPF₆ EC:EMC (1:2 v/v) provides the highest capacity over multiple cycles. A discharge capacity of 128 mAh g^?1 (78 % of theoretical capacity) is achievable for intrinsic LiCoPO₄ without further treatment (e.g., carbon coating) at an effective 0.1 C rate with a proper constant current–constant voltage step. Analysis of reported synthesis techniques shows that microwave synthesis yields the highest capacity for the intrinsic LiCoPO₄ material to date.     

Esterification of glycerol with conjugated linoleic acid and long-chain fatty acids from fish oil

Free fatty acids from fish oil were prepared by saponification of menhaden oil. The resulting mixture of fatty acids contained ca. 15% eicosapentaenoic acid (EPA) and 10% docosahexaenoic acid (DHA), together with other saturated and monounsaturated fatty acids. Four commercial lipases (PS from Pseudomonas cepacia, G from Penicillium camemberti, L2 from Candida antarctica fraction B, and L9 from Mucor miehei) were tested for their ability to catalyze the esterification of glycerol with a mixture of free fatty acids derived from saponified menhaden oil, to which 20% (w/w) conjugated linoleic acid had been added. The mixtures were incubated at 40°C for 48h. The ultimate extent of the esterification reaction (60%) was similar for three of the four lipases studied. Lipase PS produced triacylglycerols at the fastest rate. Lipase G differed from the other three lipases in terms of effecting a much slower reaction rate. In addition, the rate of incorporation of omega-3 fatty acids when mediated by lipase G was slower than the rates of incorporation of other fatty acids present in the reaction mixture. With respect to fatty acid specificities, lipases PS and L9 showed appreciable discrimination against esterification of EPA and DHA, respectively, while lipase L2 exhibited similar activity for all fatty acids present in the reaction mixture. The positional distribution of the various fatty acids between the sn-1,3 and sn-2 positions on the glycerol backbone was also determined.     

Electrical conductivity modeling of carbon black/polycarbonate,carbon nanotube/polycarbonate,and exfoliated graphite nanoplatelet/polycarbonate composites

Adding conductive carbon fillers to electrically insulating thermoplastic polymers increases the resulting composite's electrical conductivity, which would enable them to be used in electrostatic dissipative and semiconductive applications. In this study, varying amounts of carbon black (CB: 2 to 10 wt %), multiwalled carbon nanotubes (CNT: 0.5 to 8 wt %), or exfoliated graphite nanoplatelets (GNP: 2 to 15 wt %) were added to polycarbonate (PC) and the resulting composites were tested for electrical conductivity (EC = 1/electrical resistivity). The percolation threshold was ～ 1.2 vol % CNT, ～ 2.4 vol % CB, and ～ 4.6 vol % GNP. In addition, three EC models (Mamunya, additive, and general effective media) were developed for the CB/PC, CNT/PC, and GNP/PC composites. The general effective media (GEM) model showed the best agreement with the experimental results over the entire range of filler concentrations (above and below the percolation threshold) for all three composite systems. In addition, the GEM model can be easily adapted for composites containing combinations of different conductive fillers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermal properties of sodium borosilicate glasses as a function of sulfur content

Sulfur trioxide (SO₃) additions, up to 3.0 mass%, were systematically investigated for effects on the physical properties of sodium borosilicate glass melted in air, with a sulfur-free composition of 50SiO₂–10Al₂O₃–12B₂O₃–21Na₂O–7CaO (mass%). Solubility measurements, using electron microscopy chemical analysis, determined the maximum loading to be ~1.2 mass% SO₃. It was found that measured sulfur (here as sulfate) additions up to 1.18 mass% increased the glass transition temperature by 3%, thermal diffusivity by 11%, heat capacity by 10%, and thermal conductivity by 20%, and decreased the mass density by 1%. Structural analysis, performed with Raman spectroscopy, indicated that the borosilicate network polymerized with sulfur additions up to 3.0 mass%, presumably due to Na₂O being required to charge compensate the ionic additions, thus becoming unavailable to form non-bridging oxygen in the silicate network. It is postulated that this increased cross-linking of the borosilicate backbone led to a structure with higher dimensionality and average bond energy. This increased the mean free paths and vibration frequency of the phonons, which resulted in the observed increase in thermal properties.     

RB Regulates DNA Double Strand Break Repair Pathway Choice by Mediating CtIP Dependent End Resection

Inactivation of the retinoblastoma tumor suppressor gene (RB1) leads to genome instability, and can be detected in retinoblastoma and other cancers. One damaging effect is causing DNA double strand breaks (DSB), which, however, can be repaired by homologous recombination (HR), classical non-homologous end joining (C-NHEJ), and micro-homology mediated end joining (MMEJ). We aimed to study the mechanistic roles of RB in regulating multiple DSB repair pathways. Here we show that HR and C-NHEJ are decreased, but MMEJ is elevated in RB-depleted cells. After inducing DSB by camptothecin, RB co-localizes with CtIP, which regulates DSB end resection. RB depletion leads to less RPA and native BrdU foci, which implies less end resection. In RB-depleted cells, less CtIP foci, and a lack of phosphorylation on CtIP Thr847, are observed. According to the synthetic lethality principle, based on the altered DSB repair pathway choice, after inducing DSBs by camptothecin, RB depleted cells are more sensitive to co-treatment with camptothecin and MMEJ blocker poly-ADP ribose polymerase 1 (PARP1) inhibitor. We propose a model whereby RB can regulate DSB repair pathway choice by mediating the CtIP dependent DNA end resection. The use of PARP1 inhibitor could potentially improve treatment outcomes for RB-deficient cancers.     

Glass‐polymer melt hybrids. I: Viscoelastic properties of novel affordable organic‐inorganic polymer hybrids

A novel class of organic‐inorganic polymer hybrids was developed by melt‐blending up to 50 (v/v) % [about 83 (w/w) %] tin‐based polyphosphate glass (Pglass) and low‐density polyethylene (LDPE) in conventional plastics processing equipment. The liquid‐ and solid‐state rheology of the polymer hybrids was studied under oscillatory shear flow and deformation to understand the behavior of these materials and to accelerate efforts to melt process the Pglass with organic polymers. All the materials were found to be linearly viscoelastic in the range of temperature and frequencies examined and their viscoelastic functions increased with increasing Pglass concentration. The Pglass significantly enhanced the shear‐thinning characteristics of the Pglass‐LDPE hybrid, indicating the presence of nonlinear chemical and physical interactions between the hybrid components. Morphological examination of the materials by scanning electron microscopy revealed interesting evolution of microstructure of the Pglass phase from droplets (or round beads) to elongated and interpenetrating network structures as the glass concentration was increased in the Pglass‐LDPE hybrids. Melt viscosities of the materials were well described by a simple power‐law equation and a Maxwellian (Hookean) model with three relaxation times. Time‐temperature superpositioning (TTS) of the complex viscosity versus frequency data was excellent at 170°C < T < 220°C and the temperature dependencies of the shift factors conformed excellently well to predictions from an Arrhenius‐type relation, enabling calculation of the flow‐activation energies (25–285 kj/mol) for the materials. The beneficial function of the Pglass in the hybrid system was significantly enhanced by pre‐treating the glass with coupling agents prior to incorporating them into the Pglass‐LDPE hybrids.     

Material properties and operating configurations of membrane reactors for propane dehydrogenation

A modeling‐based approach is presented to understand physically realistic and technologically interesting material properties and operating configurations of packed‐bed membrane reactors (PBMRs) for propane dehydrogenation (PDH). PBMRs composed of microporous or mesoporous membranes combined with a PDH catalyst are considered. The influence of reaction and membrane transport parameters, as well as operating parameters such as sweep flow and catalyst placement, are investigated to determine desired “operating windows” for isothermal and nonisothermal operation. Higher Damköhler (Da) and lower Péclet (Pe) numbers are generally helpful, but are much more beneficial with highly H₂‐selective membranes rather than higher‐flux, lower‐selectivity membranes. H₂‐selective membranes show a plateau region of conversion that can be overcome by a large sweep flow or countercurrent operation. The latter shows a complex trade‐off between kinetics and permeation, and is effective only in a limited window. H₂‐selective PBMRs will greatly benefit from the fabrication of thin (～1 µm or less) membranes. © 2014 American Institute of Chemical Engineers AIChE J, 61: 922–935, 2015     

Examination of a Structural Model of Peptidomimicry by Cyclic Acyldepsipeptide Antibiotics in Their Interaction with the ClpP Peptidase

The cyclic acyldepsipeptide (ADEP) antibiotics act by binding the ClpP peptidase and dysregulating its activity. Their exocyclic N‐acylphenylalanine is thought to structurally mimic the ClpP‐binding, (I/L)GF tripeptide loop of the peptidase's accessory ATPases. We found that ADEP analogues with exocyclic N‐acyl tripeptides or dipeptides resembling the (I/L)GF motif were weak ClpP activators and had no bioactivity. In contrast, ADEP analogues possessing difluorophenylalanine N‐capped with methyl‐branched acyl groups—like the side chains of residues in the (I/L)GF motifs—were superior to the parent ADEP with respect to both ClpP activation and bioactivity. We contend that the ADEP's N‐acylphenylalanine moiety is not simply a stand‐in for the ATPases' (I/L)GF motif; it likely has physicochemical properties that are better suited for ClpP binding. Further, our finding that the methyl‐branching on the acyl group of the ADEPs improves activity opens new avenues for optimization.     

A Functionally Graded Carbide in the Ta–C System

Hard materials used in such abrasive wear applications as cutting tools and wear inserts in drilling tools require high hardness to resist wear, high fracture toughness to withstand mechanical and thermal shock, and high chemical and thermal stability. Such a combination of properties is difficult to achieve in single‐phase materials. Functional grading is an approach that overcomes this limitation by designing and processing a graded microstructure that provides high hardness and chemical resistance at the surface with a tough interior or bulk. While functional grading is a widely used practice in the cemented carbides industry, it has not been demonstrated with “pure” carbides. This article reports the feasibility of designing and processing a graded carbide in the Ta–C binary system. It is shown that a simple carburization treatment of the high‐toughness carbide, ζ‐Ta₄C_3?x, can lead to the formation of the hard carbide phase, γ‐TaC_y, on the surface. The thickness, microstructure (grain size), and composition (C/Ta atomic ratio, y) of the γ‐TaC_y layer can be optimized to obtain both high hardness and high strength for the graded material.     

Properties of Oleogels Formed With High‐Stearic Soybean Oils and Sunflower Wax

In an effort to develop alternatives for harmful trans fats produced by partial hydrogenation of vegetable oils, oleogels of high‐stearic soybean (A6 and MM106) oils were prepared with sunflower wax (SW) as the oleogelator. Oleogels of high‐stearic oils did not have greater firmness when compared to regular soybean oil (SBO) at room temperature. However, the firmness of high‐stearic oil oleogels at 4 °C sharply increased due to the high content of stearic acid. High‐stearic acid SBO had more polar compounds than the regular SBO. Polar compounds in oil inversely affected the firmness of oleogels. Differential scanning calorimetry showed that wax crystals facilitated nucleation of solid fats of high‐stearic oils during cooling. Polar compounds did not affect the melting and crystallization behavior of wax. Solid fat content (SFC) showed that polar compounds in oil and wax interfered with crystallization of solid fats. Linear viscoelastic properties of 7% SW oleogels of three oils reflected well the SFC values while they did not correlate well with the firmness of oleogels. Phase‐contrast microscopy showed that the wax crystal morphology was slightly influenced by solid fats in the high‐steric SBO, A6.