Effect of fortification with asparagus powder on the qualitative properties of processed cheese

The qualitative properties of processed cheese (PC) fortified with different levels of asparagus powder (AP) (0.5%, 1% and 1.5% wt/wt) were evaluated during storage. AP decreased the pH and lipolysis indexes and increased the phenolic content, antioxidant activity and proteolysis of the processed cheeses. AP made the structure of the cheese more elastic, increased the rigidity and decreased the spreadability compared with the control sample, which corresponded to the results obtained using dynamic oscillatory rheometry. The results showed that AP as a rich source of bioactive components could be used for the fortification of processed cheeses.     

Effect of storage options on price-based scheduling for a hybrid trigeneration system

Trigeneration is efficient to supply cooling, heat, and power demands. Also, hydro (pumped) storage with zero fuel costs can increase profit when price-based scheduling problem is solved. The goal of this study is to investigate the effects of electric boiler, hydro storage, and heat storage tank on price-based scheduling problem for hybrid trigeneration (trigeneration-conventional-gas boiler) system. A heuristic algorithm is applied to a power system where in validation case, total cost reduction of 0.63% to 0.91% is reached as compared with reported in literature. The results show that the utilization of electric boiler, hydro storage, and heat storage tank leads to profit improvement by 4.58%. Also, a critical sensitivity analysis is conducted and the results show the significant effects of several factors on scheduling results.     

Pack Cementation Coatings for High-Temperature Oxidation Resistance of AISI 304 Stainless Steel

Aluminum and titanium are deposited on the surface of steel by the pack cementation method to improve its hot-corrosion and high-temperature oxidation resistance. In this research, coatings of aluminum and titanium and a two-step coating of aluminum and titanium were applied on an AISI 304 stainless steel substrate. The coating layers were examined by carrying out scanning electron microscopy (SEM) and x-ray diffraction (XRD). The SEM results showed that the aluminized coating consisted of two layers with a thickness of 450???m each, the titanized coating consisted of two layers with a thickness of 100???m each, and the two-step coatings of Al and Ti consisted of three layers with a thickness of 200???m each. The XRD investigation of the coatings showed that the aluminized coating consisted of Al₂O₃, AlCr₂, FeAl, and Fe₃Al phases; the titanized layers contained TiO₂, Ni₃Ti, FeNi, and Fe₂TiO₅ phases; and the two-step coating contained AlNi, Ti₃Al, and FeAl phases. The uncoated and coated specimens were subjected to isothermal oxidation at 1050?°C for 100?h. The oxidation results revealed that the application of a coating layer increased the oxidation resistance of the coated AISI 304 samples as opposed to the uncoated ones.     

Polyphenol-rich seaweed (Eucheuma cottonii) extract suppresses breast tumour via hormone modulation and apoptosis induction

The edible red seaweed Eucheuma cottonii is abundantly cultivated for carrageenan production. This study investigated the effects of dietary E. cottonii polyphenol-rich extract (ECME) on breast cancer. In vitro assays showed that ECME was antiproliferative against oestrogen-dependent MCF-7 and oestrogen-independent MB-MDA-231 human breast-cancer cells (IC₅₀ values of 20 and 42 μg/ml, respectively) but was non-toxic to normal cell lines. The ECME (150 and 300 mg/kg BW) was fed to female rats and, after 4 weeks, rat mammary tumour was induced using LA7 cells (inoculated subcutaneously). The ECME inhibited tumour development and erythrocyte lipid peroxidation in the cancer-induced rats, dose-dependently. It showed anti-oestrogenic effects on the rat estrous cycle and serum hormone levels. Electron microscopy and histopathology observations confirmed apoptosis in the rat mammary tumours. The polyphenol-rich ECME was tumour-suppressive via apoptosis induction, downregulating the endogenous oestrogen biosynthesis, and improving antioxidative status in the rats.     

A Novel Alternative Method for Modeling the Effects of Air Temperature and Slice Thickness on Quality and Drying Kinetics of Tomato Slices: Superposition Technique

The effect of air temperature (AT) and slice thickness (ST) on the quality and drying kinetics of tomato slices were studied. The drying period of tomato slices to reach the moisture content of 15% (wb) ranged from 2.6 to 18.7 h. The water diffusivity, activation energy, and resistance to diffusion ranged from 1.4 × 10^?10 to 2.8 × 10^?9 m²/s, 21.25 to 23.4 kJ/mol, and from 939 to 4590 m² s/kg, respectively. Drying had a significant effect on ascorbic acid, soluble solid, acidity, and pH (P = 0.01). The ascorbic acid degradation was greatly influenced by ST. The results show that time-temperature superposition technique (TTST) was very efficient in the modeling of the drying process. The proposed TTST provides a novel alternative in curve-fitting exercise of drying data. Neural networks also showed favorable performance in estimating the drying functions.     

Highly efficient synthesis of benzopyranopyridines via ZrP2O7 nanoparticles catalyzed multicomponent reactions of salicylaldehydes with malononitrile and thiols

ZrP₂O₇ nanoparticles as an efficient catalyst have been used for the preparation of benzopyrano[2,3-b]pyridines from the four-component condensation reaction of salicylalde-hydes, thiols, and 2 equiv. of malononitrile under reflux conditions in ethanol in excellent yields and short reaction times.     

Quenching and Partitioning (Q&P) Processing of Martensitic Stainless Steels

Austenite was stabilized in the martensitic stainless steel grade AISI 420 by means of quenching and partitioning (Q&P) processing. The effects of quenching temperature on the microstructure and mechanical properties were investigated. The specimens processed at low quench temperatures (regime I) had a microstructure consisting of tempered martensite and retained austenite. At high quench temperatures (regime II), fresh martensite was present too. The highest austenite fraction of about 0.35 was obtained at the quench temperature delineating regimes I and II. The amount of carbon in retained austenite increased as the quench temperature decreased. The carbon level of austenite was, however, much lower than the carbon concentrations expected from full partitioning assumption. This was mainly due to the extensive cementite formation in the partitioning step. Stabilization of austenite by Q&P processing was found not to be purely chemical. Austenite stabilization was also assisted by locking, because of local carbon enrichment, of potential martensite nucleation sites in the austenite/martensite boundaries and in austenite defects. The importance of the latter stabilization mechanism increased at higher martensite fractions. According to the tensile test results, the Q&P processed specimen with the highest austenite fraction was not associated with the best combination of strength and ductility. The mechanical stability of austenite was found to increase with its carbon concentration being the highest at the lowest quench temperature. The thermal stability, on the other hand, was almost inversely proportional to the retained austenite fraction, being low at intermediate quench temperatures where the retained austenite fraction was high.     

Effects of bed-load movement on flow resistance over bed forms

The effect of bed-load transport on flow resistance of alluvial channels with undulated bed was experimentally investigated. The experiments were carried out in a tilting flume 250mm wide and 12.5m long with glass-sides of rectangular cross-section and artificial dune shaped floor that was made from Plexi-glass. Steady flow of clear as against sediment-laden water with different flow depths and velocities were studied in the experiments with a fine sand (d ₅₀ = 0.5mm). The results indicate that the transport of fine particles (d ₅₀ = 0.5mm) can decrease the friction factor by 22% and 24% respectively for smooth and rough beds. Increasing the bed-load size (d ₅₀ = 2.84 mm) can decrease the friction factor by 32% and 39% respectively for smooth and rough beds. The decrease in flow resistance is due to filling up of the troughs of dunes. This separation zone is responsible for increasing the flow resistance. On the upstream side of dunes condition is similar to plane bed. Presence of bed-load causes to increase the shear velocity and hence increasing flow resistance. But decreasing in flow resistance is more and it causes to decrease the total flow resistance. Grains saturated the troughs in the bed topography, effectively helping in smoothening of bed irregularities.     

Effect of Postweld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser-Welded Ti-6Al-4V

The effects of postweld heat treatment (PWHT) on 3.2-mm- and 5.1-mm-thick Ti-6Al-4V butt joints welded using a continuous wave (CW) 4-kW Nd:YAG laser welding machine were investigated in terms of microstructural transformations, welding defects, and hardness, as well as global and local tensile properties. Two postweld heat treatments, i.e., stress-relief annealing (SRA) and solution heat treatment followed by aging (STA), were performed and the weld qualities were compared with the as-welded condition. A digital image correlation technique was used to determine the global tensile behavior for the transverse welding samples. The local tensile properties including yield strength and maximum strain were determined, for the first time, for the laser-welded Ti-6Al-4V. The mechanical properties, including hardness and the global and local tensile properties, were correlated to the microstructure and defects in the as-welded, SRA, and STA conditions.