Maintenance strategy based on a multicriterion classification of equipments

In an industrial plant, the level of maintenance provided to individual equipment is directly related to the availability that is expected from it. Thus, it is hoped that the most critical equipments will not fail or, at least, that any failure will be rapidly detected and corrected in the minimum time possible. Since resources are limited, it is necessary to determine how they should be distributed, so that no important equipment remains neglected while more resources are concentrated on the most critical items. Therefore, it is necessary to classify equipment in an objective way according to its importance. The method of multicriterion classification of critical equipments (MCCE)², which is described in the present work, allows systematic and detailed quantification of the criticality of all equipment, that is to say, it provides an evaluation of the importance that its correct operation has for the plant. To provide this information, the consequences for a company of any failure in the equipment concerned are analysed. Finally, a real case example of an urban wastewater treatment plant is described, in which the MCCE method is applied.     

Modelling thermal degradation of composite materials

A one–dimensional, transient thermal degradation heat transfer model for the response of composite materials when exposed to fire is presented. The model can handle layers of different materials. Material properties are functions of temperature. The reaction can be specified using Arrhenius‐type parameters or by inputting a density–temperature relationship determined by any experimental technique such as thermogravimetric analysis. The model is validated against the experimental data presented in Boyer's 1984 dissertation. Overall, the model provides excellent agreement with the experimental data. It is shown that very little difference is found between results arrived at by Arrhenius kinetics and results obtained by specifying the easier to measure density–temperature relationship. From this it is concluded that this technique is a viable alternative to Arrhenius‐type models. Copyright © 2006 John Wiley & Sons, Ltd.     

A scale model for fitting object shapes from fixed location data

In this paper we present a scale model for fitting an ideal shape to an object. The measurements of the object are taken corresponding to a fixed coordinate system at a set of well-defined locations on the surface of the object. We propose an algorithm to estimate the model parameters and hypothesis tests to make statistical inferences about several possible special cases of the general model. The model is tested with an example that analyzes data on the feet of people in Hong Kong.     

Liver glutathione content and glutathione-dependent enzymes of two species of freshwater fish as bioindicators of chemical pollution

Glutathione content and glutathione-dependent enzymes were measured in the liver of two fish species, gudgeon (Gobio gobio) and roach (Rutilus arcasii), from the river Bernesga (Spain) caught downstream and upstream of the waste site of several chemical industries. Animals from contaminated sites display a reduced glutathione concentration and a tendency to the decrease of glutathione S-transferase activity. Glutathione peroxidase activity was significantly elevated only in the liver of Gobio gobio and glutathione reductase activity in that of Rutilus arcasii. Our data indicate that the glutathione system constitutes a sensitive biochemical indicator of chemical pollution. Relative changes of glutathione and glutathione-dependent enzymes in both fish species suggest a different susceptibility to toxins.     

Epitope specificity of CD44 for monoclonal antibody-dependent facilitation of marrow engraftment in a canine model

Primary graft rejection after marrow transplantation occurs more frequently in patients receiving HLA-haploidentical compared with HLA-identical sibling transplants. Both human and experimental animal data suggest that the cells responsible for this phenomenon are either host natural killer (NK) cells, T cells, or both. To investigate the mechanisms of graft rejection, we have developed a canine model of marrow transplantation, which uses DLA-nonidentical unrelated donors in the absence of postgrafting immunosuppression. In this model most animals rejected their marrow grafts after a preparative regimen of 9.2 Gy total body irradiation (TBI). However, engraftment of DLA-nonidentical marrow can be facilitated when the recipients are pretreated with monoclonal antibody (MoAb) S5, which recognizes CD44. In this report, we extended these observations by first cloning the canine CD44 and, next, mapping the epitope recognized by S5, which was located in a region conserved among human and canine CD44 and was distinct from the hyaluronan binding domain. However, in vitro binding of S5 caused a conformational change in CD44, which allowed increased hyaluronan binding. Then, we reexamined the in vivo model of marrow transplantation and compared results with MoAb S5 to those with two other anti-CD44 MoAbs, IM7 and S3. Only MoAb S5 significantly increased the engraftment rate of DLA-nonidentical unrelated marrow, whereas the two other anti-CD44 MoAbs were ineffective. The enhanced in vivo effect was not related to differences in the MoAbs' avidities, since both S5 and IM7 had equivalent binding to CD44, but most likely related to the specific epitope that S5 recognizes. Thus, this study shows that the effect of the anti-CD44 MoAb S5 in facilitating engraftment is epitope specific and if one is to use an anti-CD44 to facilitate engraftment of marrow in humans, one cannot assume that any anti-CD44 would work.     

Finite element analysis of partly wrinkled reinforced prestressed membranes

Wrinkling is a well known phenomenon experimented by tension membranes in Civil Engineering applications. This paper will present an efficient numerical technique for the computational simulation of such wrinkles in a prestressed membrane. In particular, the relaxed energy approach (Pipkin in IMA J Appl Math 36:85–99, 1986) is particularized for prestressed membranes (Gil in Textile composites and inflatable structures, CIMNE, 2003) undergoing moderate strains. Wrinkling conditions in terms of the Euler-Lagrange finite deformation tensor along principal directions will be obtained. This will provide a framework to describe properly the initial instant when wrinkles start to be encountered in a prestressed Saint Venant–Kirchhoff hyperelastic membrane. Subsequently, a modified Helmholtz’s free energy functional will be introduced with the purpose of describing the modified constitutive behaviour of the continuum after the onset of wrinkling. Consistent derivations of the stress tensor as well as the constitutive tensor will de depicted. The results will be particularized for membranes and cables in a Finite Element discretization basis. Some numerical examples will prove the accuracy and robustness of the described algorithm.     

Silver Electrodeposition from Photographic Processing Solutions

This paper describes the parameters that are important in the industrial practice of silver removal from photographic fixers. The experiments were performed under potentiostatic control using synthetic solutions. The current efficiency was analysed as a function of the cathodic potential taking into account the deposit quality. A cathodic potential of ?0.5 V against a saturated calomel electrode is recommended. The conditions to prevent the darkening of the electrodeposit were investigated. The determination of silver concentration in the solution was made by direct potentiometry. The results obtained with synthetic fixers were corroborated by making the silver deposition from commercial fixers in an electrochemical reactor with rotating cylinder electrode intercalated in an electrolytic flow circuit in order to simulate practical conditions.     

Oxidation and mineralisation of substituted phenols by Fenton's reagent and catalytic wet oxidation.

Catalytic abatement of solutions of 1,000 mg/L in phenol, ortho and para nitrophenol and ortho and para cresols was acomplished by using two catalytic systems. Fenton's reagent was used at 50 degrees C by adding 10 mg/L of ferrous cation and different dosages of H2O2. The mixture was reacting isothermically in a batch way during 3 hours. Catalytic wet oxidation (CWO) was carried out by using a commercial Activated Carbon, Industrial React FE01606A, CWO runs were carried out in a fixed bed reactor (FBR) with concurrent upflow. Temperature and oxygen pressure of the reactor were set to 160 degrees C and 16 bar, respectively. While phenols are quicky oxidised by the Fenton reagent higher mineralisation was obtained in the CWO process.