Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

Study of the copper leaching in the wet oxidation of phenol with CuO-based catalysts: Causes and effects

Catalytic wet oxidation of phenol as a model pollutant has been performed in a three phase fixed-bed reactor (FBR) by using a commercial catalyst based on copper oxide in order to analyze the variables affecting significantly the copper leaching. It has been found that temperature has an almost negligible influence in the range studied (70–160 °C). On the contrary, an important effect of the pH value was noticed. The copper leaching reduces when the pH of the solution fed to the reactor increases, being almost negligible at pH ≥ 5. Moreover, the composition of the reaction media also influences the leaching. Higher copper concentrations than those expected by the effect of the acid aqueous media have been measured in the reactor effluent when phenol, catechol, hydroquinone, p-benzoquinone and maleic acid are present in the reaction media. On the contrary, oxalic acid has a negative influence on the leaching, since it captures the copper in solution to form copper oxalate which precipitates on the catalyst surface. For a previously acidified medium, the acetic and formic acids do not have any other effect on the copper leaching. It has been also demonstrated that as copper in solution decreases, so does phenol conversion, because the homogeneous catalysis contributes significantly to the oxidation reactions even in fixed-bed reactors.     

Land Use Effect on the CN Model Parameters in a Tropical Dry Environment

Dry tropical forests account for over 1,000,000 km², and there is still lack of knowledge on their hydrologic processes. The curve number (CN) hydrologic model developed by the Natural Resources Conservation Service (NRCS) is widely applied for runoff determination in various parts of the world, but not so in tropical semiarid regions. This study analyzes the impact of land use changes on the CN model in a tropical semiarid environment, in two catchments of native dry tropical forest and thinned dry tropical forest land use from 2009 to 2012. The CN model was calibrated and validated for the NRCS recommended initial abstraction ratio λ = 0.2, and for λ evaluated from rainfall and runoff data. A reliability analysis was performed using Monte Carlo simulation. Model goodness-of-fit was assessed with statistical criteria. A total of 42 and 40 rainfall-runoff events were analyzed for the native and thinned dry tropical forest, respectively. Characteristic λ values of 0.15 and 0.11 were determined for the two respective catchments. Although CN values were similar for both land uses, CN_λ=0.20 = 80 and CN_{median λ} = 77, the thinned catchment showed a higher CN model parameters variability. The CN model was more sensitive to variations of CN values than to those of λ. This study showed that no matter the vegetation management in a dry tropical forest environment, modeled runoff is not affected by λ, but rather affected by CN, which represents soil, landuse and management.     

Observability of linear systems with commensurate delays and unknown inputs

This paper investigates the observability analysis for linear time systems whose outputs are affected by unknown inputs. Three different definitions of observability are proposed. By introducing the Smith form and comparing the invariant factors, a sufficient condition is deduced for each proposed observability definition. Three examples are given for the purpose of highlighting the effectiveness of the proposed approach.     

Application of the classical levels of intelligence to structuring the control system in an automated distribution centre

Traditional management and control models can benefit from added levels of intelligence to increase their capability to adapt to the continuous changes in global markets. After reviewing the classical definition of intelligence and its levels, this paper provides a new approach to help increase the responsiveness of management and control to changes and disturbances in the manufacturing supply chain. The ancient concept of the “Tertium Quid” has inspired a three-level community of agents (MAS-TRIO) that is proposed to improve the coordination of all actors involved. The proposed model combines Multi-Agent Systems (MAS) with Radio-Frequency Identification (RFID) to make possible a certain level of Autonomous Intelligence in the decision-taking process. This paper analyses how these levels of intelligence can be applied to management and control, and the performance of the proposed model has been tested at low and mid-levels on an experimental platform representing the facilities of a distribution centre controlled by a network of programmable logic controllers (PLCs).     

The effect of ceria content on the performance of Pt/CeO2/Al2O3 catalysts in the partial oxidation of methane

The effect of CeO₂ loading (1–20 wt.%) on the properties and catalytic behaviors of CeO₂–Al₂O₃-supported Pt catalysts on the partial oxidation of methane was studied. The catalysts were characterized by S_BET, X-ray diffraction (XRD), temperature-programmed reduction (TPR) and oxygen storage capacity (OSC). XRD and TPR results showed that the pretreatment temperature of the support influences on the amount of CeO₂ with fluorite structure. The pretreatment temperature of the support and CeO₂ loading influenced the morphology of Pt. OSC analysis showed a significant increase in the oxygen storage capacity per weight of CeO₂ for samples with high CeO₂ loading (12 and 20 wt.%). TPR analyses showed that the addition of Pt promotes the reduction of CeO₂. This effect was more significant for the catalysts with high CeO₂ loading (≥12 wt.%). The dispersion of Pt, measured by the rate of cyclohexane dehydrogenation, increases with increasing of the pretreatment temperature of the support. It was shown that the kind of the support is very important for obtaining of catalysts resistant to carbon formation. The catalysts with high CeO₂ loading (≥12 wt.%) showed the highest catalytic activity and stability in the reaction of partial oxidation of methane due to a higher Pt–CeO₂ interface.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

The effectiveness of the combined use of VIX and Support Vector Machines on the prediction of S&P 500

The aim of this research is to analyse the effectiveness of the Chicago Board Options Exchange Market Volatility Index (VIX) when used with Support Vector Machines (SVMs) in order to forecast the weekly change in the S&P 500 index. The data provided cover the period between 3 January 2000 and 30 December 2011. A trading simulation is implemented so that statistical efficiency is complemented by measures of economic performance. The inputs retained are traditional technical trading rules commonly used in the analysis of equity markets such as Relative Strength Index, Moving Average Convergence Divergence, VIX and the daily return of the S&P 500. The SVM identifies the best situations in which to buy or sell in the market. The two outputs of the SVM are the movement of the market and the degree of set membership. The obtained results show that SVM using VIX produce better results than the Buy and Hold strategy or SVM without VIX. The influence of VIX in the trading system is particularly significant when bearish periods appear. Moreover, the SVM allows the reduction in the Maximum Drawdown and the annualised standard deviation.     

The Di- and triesters of the lipids of steer and human meibomian glands

Three groups of diesters have been isolated and identified in the lipids of steer meibomian glands. The first group, designated as α Type I, with the abbreviated formula FA-αOHFA-FA1c, consisted of α-hydroxy fatty acids esterified to fatty acids and fatty alcohols in the approximate molar ratio 1∶1∶1. The second group, designated as ω Type I-St, with the abbreviated formula FA-ωOHF A-St, consisted of ω-hydroxy fatty acids esterified to fatty acids and sterols in the approximate molar ratio 1∶1∶1. The third group, designated as α,ω Type II, with the abbreviated formula FA-α,ωdiol-FA, consisted of α,ω-diols esterified to 2 moles of fatty acids. The sum of the different diesters comprised about 9% of total steer meibomian lipids. Capillary GLC of the fatty acids of αType I diesters showed the fatty acids to be a family with a two-cluster profile, one at C₁₂ to C₂₀ and the other at C₂₁ to C₃₁, with anteiso chains predominating. Fatty acids from ωType I-St and α,ωType II diesters gave mainly a one-cluster profile in the short long chain, C₂₃ to C₃₀, with anteiso chains predominating, while the α-hydroxy fatty acids were short chain C₁₃ to C₁₈ acids with C₁₆ predominating. The sterols in diesters ωType I-St were cholesterol (∼60%), Δ7 cholestenol (∼35%) and an unidentified compound (∼5%) with a GLC retention time slightly longer than Δ7 cholestenol on SE-30 phase. The ω-hydroxy fatty acids and α,ω-diols both were of exceedingly long chain lengths, C₂₉−C₃₈, and showed similar GLC profiles. Two types of triesters comprising approximately 1% of total steer meibomian lipids have been isolated but incompletely characterized. In terms of molar ratios, one group of triesters gave fatty acids:ω-hydroxy fatty acids:α-hydroxy fatty acids:sterols + fatty alcohols as approximately 1∶1∶1∶1. The other contained fatty acids, α-hydroxy fatty acids and α,ω-diols in what appears to be a complex mixture of several triesters. Diesters ωType I and α,ωType II also were found in human meibum. Hitherto these two diesters have not been found in any animal tissue.