Phase-shifting birefringent scatterplate interferometer

We realized what we believe is a new phase-shifting scatterplate interferometer by exploiting the polarization characteristics of a birefringent scatterplate. The common-path design of the interferometer reduces its sensitivity to environmental effects, and phase shifting allows quick and accurate quantitative measurements of the test surface. A major feature of the birefringent scatterplate approach for phase shifting is that no high-quality optical components are required in the test setup. The theory of the interferometer is presented, the procedure for the fabrication of the birefringent scatterplate is described, and experimental results are shown.     

Update strategies for kriging models used in variable fidelity optimization

Many optimization methods for simulation-based design rely on the sequential use of metamodels to reduce the associated computational burden. In particular, kriging models are frequently used in variable fidelity optimization. Nevertheless, such methods may become computationally inefficient when solving problems with large numbers of design variables and/or sampled data points due to the expensive process of optimizing the kriging model parameters in each iteration. One solution to this problem would be to replace the kriging models with traditional Taylor series response surface models. Kriging models, however, were shown to provide good approximations of computer simulations that incorporate larger amounts of data, resulting in better global accuracy. In this paper, a metamodel update management scheme (MUMS) is proposed to reduce the cost of using kriging models sequentially by updating the kriging model parameters only when they produce a poor approximation. The scheme uses the trust region ratio (TR-MUMS), which is a ratio that compares the approximation to the true model. Two demonstration problems are used to evaluate the proposed method: an internal combustion engine sizing problem and a control-augmented structural design problem. The results indicate that the TR-MUMS approach is very effective; on the demonstration problems, it reduced the number of likelihood evaluations by three orders of magnitude compared to using a global optimizer to find the kriging parameters in every iteration. It was also found that in trust region-based method, the kriging model parameters need not be updated using a global optimizer—local methods perform just as well in terms of providing a good approximation without affecting the overall convergence rate, which, in turn, results in a faster execution time.     

Expert systems: A short introduction

Expert systems are rapidly growing in diversity of application and usage worldwide. Even though expert system development has been slow in applying expert systems to the specific field of structures, expert system technology has been pervasive in other areas of engineering and manufacturing. This paper provides a short introduction on expert systems, looking at their development, application and future trends.     

THE EFFECT OF ASPHALT COMPOSITION ON THE FORMATION OF ASPHALTENES AND THEIR CONTRIBUTION TO ASPHALT VISCOSITY

Interactions among asphalt components have significant effects on the performance of asphalt binder. To understand those interactions, four asphalts, SHRP AAA-I, AAD-I, AAF-I, and AAG-I, were fractionated into three generic fractions according to Corbett's procedure and reblended into asphaltenes/aromatics/saturates ternary mixtures in various ratios. Mixtures were oxidatively aged with atmospheric air at temperatures of 87.7, 93.3, and 98.8°C for 5 to 33 days. The changes in chemical composition and physical properties were monitored using fourier transform infrared spectroscopy (FT-IR) and dynamic mechanical rheometry

The formation of asphaltenes is a major factor in the hardening of asphalt with aging. The data collected in this study indicate that the saturate content in the maltene phase has a profound impact on the contribution that asphaltenes have on the viscosity of aged asphalt. The data also suggest that the aromatics fraction is solely responsible for the formation of asphaltenes as an asphalt oxidizes.     

Influence of some hypnotist and subject variables on hypnotic susceptibility.

Randomly assigned 48 21-56 yr. Old females to 1 of 4 groups given different information with regard to a hypnotist's warmth and experience. The 6 male graduate student hypnotists had previously been judged on their objective warmth and competent appearance. Following structuring, all ss underwent individual hypnotic induction. As predicted, ss run by the objectively warmer, more competent appearing es obtained significantly higher susceptibility scores. Structured warmth produced significant differences only in ss run by the objectively less warm es. Both structured warmth and experience affected ss' subjective impressions of whether they thought they had been hypnotized. The complex relationship between antecedent variables and the various objective and subjective dependent indicators of hypnotic phenomena are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Input/output optimization and disk architectures: A survey

The file system, and the components of the computer system associated with it (disks, drums, channels, mass storage, tapes and tape drives, controllers, I/O drivers, etc.) comprise a very substantial fraction of most computer systems; substantial in several aspects including amount of operating system code, expense for components, physical size and effect on performance. In this paper we survey the state of the art file and I/O system design and optimization as it applies to large data processing installations. In a companion paper, some research results applicable to both current and future system designs are summarized.Among the topics we discuss is the optimization of current file systems, where some material is provided regarding block size choice, data set placement, disk arm scheduling, rotational scheduling, compaction, fragmentation, I/O multipathing and file data structures. A set of references to the literature, especially to analytic I/O system models, is presented. The general tuning of file and I/O systems is also considered. Current and forthcoming disk architectures are the second topic. The count key data architecture of current disks (e.g. IBM 3350, 3380) and the fixed block architecture of new products (IBM 3310, 3370) are compared. The use of semiconductor drum replacements is considered and some commercially available systems are briefly described.     

Marital status and schizophrenia: A study of incidence and outcome.

Investigated the relationships between marital status and the incidence and prognosis of schizophrenia, based on a considerably more representative sample (N = 213) than previously available. Results provide strong evidence that the rate differentials and differences in outcome so often observed for marital status categories do not derive from inadequate or inappropriate sampling or statistical manipulation. In additional analyses, controlling for differential social class and severity of pathology, however, the relationships with prognosis could no longer be observed. These latter findings suggest that a process of selection by marriage is the more tenable interpretation of the relationships under consideration. (15 ref.) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Numerical treatment of mixed boundary value problems in two-dimensional elastostatics

Finite difference treatment of two-dimensional problems in elastostatics is usually based on the differential equations for the displacement vector or the Airy stress function, depending on whether boundary conditions are on displacement or stress. In either case, determination of stresses requires numerical differentiation and therefore use of a rather fine grid. Moreover, neither method is suited to the treatment of mixed boundary conditions. The alternative method developed in this paper uses the first derivatives of the displacement components at the grid points as basic variables and hence does not require numerical differentiation in the evaluation of stresses. Appropriate finite difference equations are established, and their use is discussed in connection with a specific example with known explicit solution.     

Comparison of PCR prescreening to two cultivation procedures with PCR confirmation for detection of Mycobacterium avium subsp. paratuberculosis in U.S. Department of Agriculture fecal check test samples

Mycobacterium avium subsp. paratuberculosis (MAP) is the etiologic agent in Johne's disease in cattle and causes diarrhea, decreased milk production, emaciation, and frequently death. The ability to detect MAP rapidly and accurately is an integral part of herd management. However, detection of this bacterium is complicated due to its slow division time and its ability to enter dormancy. Culture methods are considered the "gold standard," but they have their limitations. Many enzyme-linked immunosorbent assay methods and conventional PCR methods have been used as diagnostic tools. The present study compares the results of a PCR prescreen to two culture methods of detection paired with confirmatory PCR to determine the most accurate, rapid, and sensitive method using U.S. Department of Agriculture (USDA) fecal check samples. This study involving two laboratories (Marshfield Clinic Laboratories, using solid culture medium [Herrold's egg yolk agar], and TREK Diagnostic Systems Research and Development, using liquid culture medium [ESP Culture System II]) showed that the PCR prescreening method used in this study lacked specificity and sensitivity as a stand-alone test in fecal samples. However, the combination of liquid enrichment culture using the ESP II system, and PCR confirmation with the hspX primer set, was not only 100% sensitive and specific but also correlated with viable MAP and USDA culture results.