A comparison of leaf-spring with aircushion trailer suspensions in the transport environment

Packaging engineers need to be able to accurately determine the forces present in the shipping environment in order to protect packaged goods. The purpose of this study was to determine the vertical vibration levels measured in three separate truck-trailer suspension systems; conventional leaf-spring, conventional air-ride and damaged air-ride. The main conclusion reached in this study is that the air-ride suspension when maintained gives lower power density (PD) levels on all road surfaces studied. A damaged air-ride suspension and leaf-spring suspension are very similar in response frequencies, although the damaged air-ride produces higher vibration levels at lower frequencies.     

Thermal post buckling behavior of rectangular antisymmetric cross-ply composite plates

Summary The thermal post buckling behavior of simply-supported, antisymmetric cross-ply plates with immovable edges is investigated in this paper. For this purpose, a one term approximation for the inplane and transverse displacements is assumed and Rayleigh-Ritz method is used to obtain the equations of equilibrium. The question, whether the true thermal buckling (bifurcation buckling under thermal loads) exists for such plates is also addressed to. The conditions under which the thermal buckling in the classical sense occurs are derived. It is shown that nonlinear bending stiffness for such plates is direction dependent, because of an extra quadratic nonlinear term in addition to the usual cubic nonlinear term in the governing equilibrium equation. Results are presented for various plate configurations.     

Secondary web-flange interaction in framed-tube buildings

In the conventional plane-frame model of framed-tube buildings, only the primary interaction between the web frame and the flange frame is considered, through vertical shear transfer at corner columns. In addition to this, a secondary interaction takes place due to horizontal shear transfer at each floor level, through the floor slab having high in-plane rigidity. This interaction causes a discrepancy in member forces of a few bottom and top storeys. A simple modification is suggested in the form of an additional cantilever column connected to the conventional plane-frame model by axial force transfer members at every floor level. The improved model yields member forces in all the storeys that are very close to those obtained using 3D analysis.     

Automatic full field analysis of perfusion images gained by scanning laser Doppler flowmetry

BACKGROUND: Scanning laser Doppler flowmetry (SLDF) enables the measurement of the laser Doppler frequency shift in retinal tissue. This process allows the quantification of retinal and optic nerve head perfusion in an area of 2.7 mm x 0.7 mm within 2 seconds and with a spatial resolution of 10 microns x 10 microns. Owing to the local heterogeneity of the retinal microcirculation itself and to heart associated pulsation the capillary retinal blood flow depends on location and time. Because of technical limitations measurements of flow are only valid in retinal points with adequate brightness and focus, and away from big vessels. To include the heart beat associated pulsation and the spatial heterogeneity of retinal blood flow into the evaluation of blood flow an algorithm was developed examining automatically the whole SLDF perfusion image. AIM: To report intraobserver reliability and interobserver reliability of a new method for analysing automatically full field perfusion images. METHOD: The base of blood flow calculation by the automatic full field perfusion image analyser (AFFPIA) was 16,384 intensity time curves of all pixels of the whole perfusion image gained by the SLDF. AFFPIA calculates the Doppler frequency shift and the haemodynamic variables flow, volume, and velocity of each pixel. The resulting perfusion image was processed with respect to (1) underexposed and overexposed pixels, (2) saccades, and (3) the retinal vessel tree. The rim area and the saccades were marked interactively by the operator. The capillaries and vessels of the retinal vessel tree were identified automatically by pattern analysis. Retinal vessels with a diameter greater than 30 microns, underexposed or overexposed areas, and saccades were excluded automatically. Based on the whole perfusion image total mean flow, total mean volume, total mean velocity, standard deviation, cumulative distribution curve of flow, and the capillary pulsation index were calculated automatically. Heart beat associated pulsation of capillary blood flow was estimated by plotting the mean capillary flow of each horizontal line against time. Intraobserver reliability was estimated by measuring 10 eyes of 10 subjects on five different days by one observer. Interobserver reliability of AFFPIA was evaluated by analysing 10 perfusion maps by five different operators. To find a baseline of retinal blood flow, perfusion maps of 67 eyes of normal subjects with a mean age of 40.4 (SD 15) years were evaluated by AFFPIA. RESULTS: The coefficient of reliability of the intraobserver reproducibility of flow was 0.74. The coefficient of reliability of the interobserver reproducibility was 0.95. The juxtapapillary retinal capillary flow was temporally 484 (SD 125), nasally 450 (117); the rim area capillary flow was 443 (110). The mean capillary pulsation index of retinal flow was 0.56 (0.14). CONCLUSION: Retinal blood flow evaluation by the AFFPIA increases significantly the interobserver reliability compared with conventional evaluation of 100 microns x 100 microns areas in SLDF images with the original Heidelberg retina flowmeter software. The intraobserver reliability of AFFPIA was in the same range as conventional evaluation.