Determination of scattering parameters of junctions associated with electromagnetic topology

This paper is dedicated to the determination of topological S parameters in the transmission line networks. We are especially interested in ideal junctions which consist of short circuit connections. For this type of junctions, it is impossible to deduce the S parameters from the usual impedance or admittance matrices which are not defined in this case. We suggest a method allowing a direct calculation of S. This procedure is described and then carried out for a two wire fork. At last, an experimental application is given for this model.     

Estimation of bacterial production through the coupling of (methyl 3H) Thymidine incorporation and several parameters over a Microcystis aeruginosa bloom in a hypereutrophic reservoir

The coupling of the changes in bacterial quantitative and metabolic aspects during Microcystis aeruginosa bloom conditions together with several environmental parameters was studied in the hypereutrophic Villerest reservoir, France. Bacterial abundance varied from 5.20 to 21.28 × 10⁶ bacteria-mL^?1, while bacterial biomass ranged between 75 and 507 μg C mL^?1. These results confirmed the highly eutrophic status of the Villerest reservoir. The relative quantitative importance of attached bacteria increased as Microcystis proliferated. Methyl-³H incorporation and D-(U-¹⁴C) glucose uptake varied from 8.99 to 60.57 × 10⁶ cells-mL^?1, and 0.016 to 1.587 μg CL^?1 h^?1, respectively. Correlations between several abiotic and biotic parameters showed that phytoplankton regulated bacterial growth by releasing organic carbon which is directly uptaken by heterotrophic bacteria. In the hypolimnion, the sedimentation of decaying algae represented a substantial substrate for bacterial growth.     

Intentionality in human gait control: Modifying the frequency-to-amplitude relationship.

Tight frequency-to-amplitude relationships are observed in spontaneous human steady gait. If required, however, they can be modified. The following experiments were aimed at the processes underlying this flexibility, which forms the fundamental basis of the intentional adaptive capabilities of locomotion. In Exp 1, Ss had to intentionally modify the frequency-to-amplitude relationship (leading to preferred or nonpreferred steady states). In Exp 2, they had to temporarily perturbate the stride-frequency-to-amplitude relationship to intentionally shorten or lengthen 1 stride. Within the important constraints exerted by the head–arm–trunk system on leg movement, the results pointed out 2 main strategies that allow the S to intentionally adapt stride organization on-line: adjustment of the tonic properties of the oscillating leg to achieve nonpreferred steady states and phasic action to ensure temporary movement away from a steady state. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Phase Equilibria in the Na2O-Cs2O-SiO2 System

The Na₂O-Cs2O-SiO₂ system has been investigated by means of a new differential thermal analysis apparatus. Two compounds have been observed for the first time in the metasilicate and disilicate joins. The CsNaSi₂O₅ disilicate melts congruently at 1217 K and the peritectic fusion of the CsNaSiO₃ metasilicate occurs at 1120 K.     

The Air is Always Cleaner on the Other Side: Race,Space, and Ambient Air Toxics Exposures in California

Abstract: Environmental justice advocates have recently focused attention on cumulative exposure in minority neighborhoods due to multiple sources of pollution. This article uses U.S. EPA's National Air Toxics Assessment (NATA) for 1996 to examine environmental inequality in California, a state that has been a recent innovator in environmental justice policy. We first estimate potential lifetime cancer risks from mobile and stationary sources. We then consider the distribution of these risks using both simple comparisons and a multivariate model in which we control for income, land use, and other explanatory factors, as well as spatial correlation. We find large racial disparities in California's “riskscape” as well as inequalities by other factors and suggest several implications for environmental and land use policy.     

Non-contact handling in microassembly: Acoustical levitation

Microassembly is currently of the utmost importance in industry. Nevertheless, the classical assembly processes are no longer usable for very small components, typically ranging from 10  m to 10 mm, since usually neglected surface forces disturb the handling task by inducing adhesion between the component and the gripper. A promising alternative to tackle surface forces consists in levitating the handled component. The various advantages of this contactless handling method are reviewed here and justify the choice of this approach. Consequently, the numerous physical principles suitable for contactless handling are briefly described together with their limitations. The evaluation shows that acoustic levitation is best fitted in the case of microassembly. A classification of literature applications is presented hereafter with special focus on acoustic levitation. Finally, the most common models of acoustical levitation are inspected in a general way. The described models come within the scope of non-linear acoustics.     

Design,Implementation, and Validation of KOMPSAT‐2 Software Simulator

In this paper, we present design features, implementation, and validation of a satellite simulator subsystem for the Korea Multi‐Purpose Satellite‐2 (KOMPSAT‐2). The satellite simulator subsystem is implemented on a personal computer to minimize costs and trouble on embedding onboard flight software into the simulator. An object‐oriented design methodology is employed to maximize software reusability. Also, instead of a high‐cost commercial database, XML is used for the manipulation of spacecraft characteristics data, telecommand, telemetry, and simulation data. The KOMPSAT‐2 satellite simulator subsystem is validated by various simulations for autonomous onboard launch and early orbit phase operations, anomaly operation, and science fine mode operation. It is also officially verified by successfully passing various tests such as the satellite simulator subsystem test, mission control element system integration test, interface test, site installation test, and acceptance test.