Modeling Feedback Bridging Faults with Non-Zero Resistance

We study the behavior of feedback bridging faults with non-zero bridge resistance in both combinational and sequential circuits. We demonstrate that a test vector may detect the fault, not detect the fault or lead to oscillation, depending on bridge resistance. Moreover, the resistance intervals in which a particular behavior is observed are not necessarily contiguous. We demonstrate non-trivial behavior for situations in which a detection seems impossible, namely disabled loops going through a gate with controlling values on its side inputs.We outline the multiple strengths problem which arises due to the fact that a critical bridge resistance depends on the strengths of the signals driving the bridge, which in turn are functions of the number of the on-transistors, these again depending on the bridge resistance, making such a fault very hard to resolve. For sequential circuits, we describe additional difficulties caused by the need to account for implications on bridge behavior, which have originated in the previous time frames. We conclude that the complexity of resistive feedback bridging fault simulation accurate enough to resolve such situations will probably be prohibitively high and propose possible simplifying assumptions. We present simulation results for ISCAS benchmarks using these assumptions with and without taking oscillation into account.This revised version was published online in March 2005 with corrections to the cover date.     

Centralized and decentralized stochastic routing models in telecommunication networks

With the advent of non-hierarchical routing in circuit-switched telecommunication networks, on-line routing policies have been developed with the objective of optimizing some measure of gain or performance. These policies are decentralized. However, traditional planning models are centralized models. We present a decentralized routing model to be used in network planning. We compare it theoretically and empirically with a centralized multicommodity flow model previously presented. The two models are solved by the same type of algorithm, a convex simplex implementation, adapted differently according to the model. Comparative results between planning models reproducing the two policies are discussed.     

Progress in reliability research in the micro and nano region

Due to the rapid development of IC technology the traditional packaging concepts are making a transition into more complex system integration techniques in order to enable the constantly increasing demand for more functionality, performance and miniaturisation. These new concepts will have to combine smaller structures and layers made of new materials with even higher reliability. As these structures will more and more display nano-features, a coupled experimental and simulative approach has to account for this development to assure design for reliability in the future. A necessary “nano-reliability” approach as a scientific discipline has to encompass research on the properties and failure behaviour of materials and material interfaces under explicit consideration of their nano-structure and the effects hereby induced. It uses nano-analytical methods in simulation and experiment to consistently describe failure mechanisms on that length scale for more accurate and physically motivated lifetime prediction models for use on a larger (i.e. then the micro) scale. This paper deals with the thermo-mechanical reliability of microelectronic components and systems and methods to analyse and predict it. Various methods are presented to enable lifetime prediction on system, component and material level, the latter introducing the field of nano-reliability for nano-packaging in advanced electronics system integration.     

Effects of fade distribution on a mobile satellite down-link and up-link performance in a frequency reuse cellular configuration

In a mobile satellite system with a frequency reuse cellular configuration, significant co-channel interference can be experienced due to the antenna side-lobe level. The signal will be subjected not only to its own fading, but also to the effect of the varying degree of fading on the co-channel interferer, and this interference will behave differently in the up and in the down-link. This paper presents a quantitative evaluation of the combined effects of fades and co-channel interference on a mobile satellite link.     

Estimation of bacterial production through the coupling of (methyl 3H) Thymidine incorporation and several parameters over a Microcystis aeruginosa bloom in a hypereutrophic reservoir

The coupling of the changes in bacterial quantitative and metabolic aspects during Microcystis aeruginosa bloom conditions together with several environmental parameters was studied in the hypereutrophic Villerest reservoir, France. Bacterial abundance varied from 5.20 to 21.28 × 10⁶ bacteria-mL^?1, while bacterial biomass ranged between 75 and 507 μg C mL^?1. These results confirmed the highly eutrophic status of the Villerest reservoir. The relative quantitative importance of attached bacteria increased as Microcystis proliferated. Methyl-³H incorporation and D-(U-¹⁴C) glucose uptake varied from 8.99 to 60.57 × 10⁶ cells-mL^?1, and 0.016 to 1.587 μg CL^?1 h^?1, respectively. Correlations between several abiotic and biotic parameters showed that phytoplankton regulated bacterial growth by releasing organic carbon which is directly uptaken by heterotrophic bacteria. In the hypolimnion, the sedimentation of decaying algae represented a substantial substrate for bacterial growth.     

Simulation of the High-Frequency Response of a Heterogeneous Ground through the Finite Difference Technique

To simulate the propagation of an electromagnetic plane wave in an inhomogeneous ground, the finite difference approach can be used. One of the main problems in using this method is imposing the boundary conditions near the ground surface, especially at high frequency. Indeed, for the E polarization, the upper top of the numerical grid must be sufficiently far away from the air-ground interface in order to neglect the field due to the heterogeneities and the discretization of the atmosphere is necessary. For magneto-telluric modeling, improved boundary conditions have already been proposed. This paper deals with a new condition, valid everywhere in air and which can be applied for E and H polarization. Thus even at high frequency, as for radar applications, only one line is added to the grid discretizing the ground.     

Power system transient stability analysis: Formulation as nearly Hamiltonian systems

In this paper we formulate power systems as nonlinear nearly Hamiltonian systems. Using the invariance principle for ordinary differential equations, necessary and sufficient conditions for asymptotic stability are established and a new method of estimating the domain of attraction of the stable equilibrium point is developed. The present results constitute a novel approach to stability analysis and involve the following three steps:

1. Given a system with dissipation, the stability of its equilibrium is ascertained by determining the stability of the associated conservative system.
2. Attractivity of the stable equilibrium of the entire system (with dissipation) is determined from the system topology.
3. An estimate of the domain of attraction of the asymptotically stable equilibrium is obtained by making use of results obtained in (a) and (b).

The stability criterion developed in this paper sheds new light on the mechanism of instability in power systems and it provides analytical verification to the concept of the potential-energy boundary surface (PEBS). The PEBS is a hypersurface which makes up a part of the boundary of the domain of attraction of the stable equilibrium in a power system. The existence and properties of the PEBS have thus far been deduced primarily via simulations and heuristic methods.     

RERBEE: robust efficient registration via bifurcations and elongated elements applied to retinal fluorescein angiogram sequences

We present RERBEE (robust efficient registration via bifurcations and elongated elements), a novel feature-based registration algorithm able to correct local deformations in high-resolution ultra-wide field-of-view (UWFV) fluorescein angiogram (FA) sequences of the retina. The algorithm is able to cope with peripheral blurring, severe occlusions, presence of retinal pathologies and the change of image content due to the perfusion of the fluorescein dye in time. We have used the computational power of a graphics processor to increase the performance of the most computationally expensive parts of the algorithm by a factor of over × 1300, enabling the algorithm to register a pair of 3900 × 3072 UWFV FA images in 5-10 min instead of the 5-7 h required using only the CPU. We demonstrate accurate results on real data with 267 image pairs from a total of 277 (96.4%) graded as correctly registered by a clinician and 10 (3.6%) graded as correctly registered with minor errors but usable for clinical purposes. Quantitative comparison with state-of-the-art intensity-based and feature-based registration methods using synthetic data is also reported. We also show some potential usage of a correctly aligned sequence for vein/artery discrimination and automatic lesion detection.