On the Relation between Morphology and FET Mobility of Poly(3‐alkylthiophene)s at the Polymer/SiO2 and Polymer/Air Interface

The influence of the interface of the dielectric SiO₂ on the performance of bottom‐contact, bottom‐gate poly(3‐alkylthiophene) (P3AT) field‐effect transistors (FETs) is investigated. In particular, the operation of transistors where the active polythiophene layer is directly spin‐coated from chlorobenzene (CB) onto the bare SiO₂ dielectric is compared to those where the active layer is first spin‐coated then laminated via a wet transfer process such that the film/air interface of this film contacts the SiO₂ surface. While an apparent alkyl side‐chain length dependent mobility is observed for films directly spin‐coated onto the SiO₂ dielectric (with mobilities of ≈10^?3 cm² V^?1 s^?1 or less) for laminated films mobilities of 0.14 ± 0.03 cm² V^?1 s^?1 independent of alkyl chain length are recorded. Surface‐sensitive near edge X‐ray absorption fine structure (NEXAFS) spectroscopy measurements indicate a strong out‐of‐plane orientation of the polymer backbone at the original air/film interface while much lower average tilt angles of the polymer backbone are observed at the SiO₂/film interface. A comparison with NEXAFS on crystalline P3AT nanofibers, as well as molecular mechanics and electronic structure calculations on ideal P3AT crystals suggest a close to crystalline polymer organization at the P3AT/air interface of films from CB. These results emphasize the negative influence of wrongly oriented polymer on charge carrier mobility and highlight the potential of the polymer/air interface in achieving excellent “out‐of‐plane” orientation and high FET mobilities.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

Trust for Ubiquitous,Transparent Collaboration

In this paper, trust-based recommendations control the exchange of personal information between handheld computers. Combined with explicit risk analysis, this enables unobtrusive information exchange, while limiting access to confidential information. The same model can be applied to a wide range of mobile computing tasks, such as managing personal address books and electronic diaries, to automatically provide an appropriate level of security. Recommendations add structure to the information, by associating categories with data and with each other, with degrees of trust belief and disbelief. Since categories also in turn confer privileges and restrict actions, they are analogous to rôles in a Rôle-Based Access Control system, while principals represent their trust policies in recommendations. Participants first compute their trust in information, by combining their own trust assumptions with others' policies. Recommendations are thus linked together to compute a considered, local trust assessment. Actions are then moderated by a risk assessment, which weighs up costs and benefits, including the cost of the user's time, before deciding whether to allow or forbid the information exchange, or ask for help. By unifying trust assessments and access control, participants can take calculated risks to automatically yet safely share their personal information.     

General reconstruction theory for multislice X-ray computed tomography with a gantry tilt

This paper discusses image reconstruction with a tilted gantry in multislice computed tomography (CT) with helical (spiral) data acquisition. The reconstruction problem with gantry tilt is shown to be transformable into the problem of reconstructing a virtual object from multislice CT data with no gantry tilt, for which various algorithms exist in the literature. The virtual object is related to the real object by a simple affine transformation that transforms the tilted helical trajectory of the X-ray source into a nontilted helix, and the real object can be computed from the virtual object using one-dimensional interpolation. However, the interpolation may be skipped since the reconstruction of the virtual object on a Cartesian grid provides directly nondistorted images of the real object on slices parallel to the tilted plane of the gantry. The theory is first presented without any specification of the detector geometry, then applied to the curved detector geometry of third-generation CT scanners with the use of Katsevich's formula for example. Results from computer-simulated data of the FORBILD thorax phantom are given in support of the theory.     

Detection of Carbon Dioxide in Air Using Difference-Frequency Generation Based Infrared Spectrometer

Spectroscopic detection of carbon dioxide (CO₂) in ambient air was performed using a continuous-wave mid-infrared spectrometer based on difference-frequency generation in an AgGaS₂ crystal. Significant improvement in nonlinear optical frequency conversion efficiency was achieved by Gaussian beam optical design consideration. CO₂ concentration was determined from direct-absorption spectral measurement.     

Algorithmen zur Pulsweitenmodulation für Wechselrichter mit in Echtzeit berechnetem Pulsmuster

Übersicht Mit Hinblick auf die zunehmend Verbreitung findende Pulsmusterberechnung in Echtzeit werden in dem Aufsatz Gesichtspunkte diskutiert, die sich aus den Eigenschaften des leistungselektronischen Stellgliedes, des Pulswechselrichters, ergeben. Die bei Abtastregelungen für die Dauer einer Abtastperiode konstante Stellgröße muß bei ihm durch Pulsweitenmodulation in ein Pulsmuster mit konstanter Amplitude und Pulsen variabler Breite umgesetzt werden. Durch ein neues Verfahren mit versetzter Abtastung haben dabei Rechentotzeiten bis zur Dauer einer halben Abtastperiode keinen Einfluß mehr auf das Pulsmuster.

---

Algorithms for pulswidth modulation of inverters with online calculated pulse patterns

Contents Online calculation of pulse patterns will be employed more intensively in the future. Aspects concerning the powereleotronic circuit, the pulsewidth-modulated inverter, are to be discussed. The set value being constant for the duration of a sampling interval, has to be converted by a modulation algorithm into a pulse pattern with constant amplitude and pulses of variable width. Calculation dead-times up to half of sampling interval have no influence on the pulse pattern when using a new algorthm with shifted sampling instants.

---

---

Herrn Prof. Dr.-Ing. Klemens Heumann zum 60. Geburtstag gewidmet