Microstructural,mechanical and tribological properties of suspension plasma sprayed YSZ/h-BN composite coating

Brittleness, relative high friction coefficient and wear rate limit the applications of ceramic coatings as wear-resistant layers. However, because embedding additives with ceramic matrix has demonstrated to be an effective way to improve coating performances, different contents and size of h-BN were added into an YSZ suspension. Afterwards, the YSZ/h-BN composite coatings were manufactured by suspension plasma spray and their tribological analysis indicated that: i) the reduction of the friction coefficient and wear rate can be achieved by incorporating h-BN into YSZ coating. ii) finer h-BN particle is more helpful to enhance the tribological properties of the coating. iii) the optimum content is dependent on h-BN particle sizes. iv) when the contents and the size of the h-BN inclusion increase, the probability distribution of the micro-hardness can become bi-modal. Three worn surface conditions were summarized and their wear mechanisms were discussed as well.     

Assessment of technological attributes of autochthonous starter cultures in Turkish dry fermented sausage (sucuk)

The study aims to evaluate the technological properties of autochthonous strains (Lactobacillus sakei S15, Lactobacillus plantarum S24, L. plantarum S91, Pediococcus pentosaceus S128b and Staphylococcus carnosus G109) in Turkish dry fermented sausage (sucuk). After 24 h of fermentaPtion, all lactic acid bacteria strains reduced the pH to below 5.0, while the pH in the control group was above 5.3. The number of lactic acid bacteria strains reached 10⁸–10⁹ cfu g⁻¹ during fermentation. Staphylococcus carnosus G109 remained at the inoculation level of 10⁶ cfu g⁻¹ during ripening. Lactobacillus sakei S15 as mono-culture showed higher TBARS values compared to other strains. The control group had the lowest L* value and autochthonous strains caused no significant difference for a* value. According to principal component analysis results, most volatile compounds were positively correlated with the group containing only L. sakei S15.     

DFTMicroagg: a dual-level anonymization algorithm for smart grid data

International Journal of Information Security - The introduction of advanced metering infrastructure (AMI) smart meters has given rise to fine-grained electricity usage data at different levels of...     

A novel antioxidant source: evaluation of in vitro bioaccessibility,antioxidant activity and polyphenol profile of phenolic extract from black radish peel wastes (Raphanus sativus L. var. niger) during simulated gastrointestinal digestion

The aim of this study was to evaluate the potency of polyphenolic extract from black radish (Raphanus sativus L. var. niger) root peel waste (PEBRRP) as an antioxidant food additive. PEBRRP was found a powerful antioxidant extract, in which had 172.9 ± 11.5, 462.72 ± 3.05, and 796.51 ± 10.4 mg TE per g dw of total antioxidant capacity (TAC) by CUPRAC, DPPH, and FRAP assays, respectively. The total phenolic content (TPC) and total flavonoid content (TFC) of PEBRRP were found as 305.51 ± 5.2 mg GAE per g dw and 171.58 ± 6.2 mg CAE per g dw, respectively. The ferulic acid (28.02 ± 4.5 mg per g dw) and epicatechin (19.82 ± 3.6 mg per g dw) were identified as the main polyphenols in undigested PEBRRP. The bioaccessibility of total phenolic and total flavonoid compounds of PEBRRP was found approximately 5%, and the antioxidant capacity of bioaccessible PEBRPP fraction was determined 6% in CUPRAC, 36% in DPPH and 47% in FRAP methods.     

A pragmatic approach to hierarchical categorization of research expertise in the presence of scarce information

International Journal on Digital Libraries - Throughout the history of science, different knowledge areas have collaborated to overcome major research challenges. The task of associating a...     

Preparation and characterization of multilayer anti-reflective coatings via sol-gel process

Single layer and multilayer films consisting of SnO₂, Ta₂O₅, SiO₂, TiO₂, indium tin oxide (ITO) and antimony tin oxide (ATO) have been prepared by sol-gel dip coating technique. All of the multilayer films contained a SiO₂ top layer, which was composed of SiO₂ nanoparticles. The other films had polymeric character. Obtained films were characterized by ellipsometry, XRD, AFM and SEM. Light transmittance values of the films were compared. Films other than SiO₂ and Ta₂O₅ were found to have crystalline structure. Thickness values of the films were in the range of 30–115 nm and roughness values were in 1.2–23 nm range. Single layer porous silica provided 95% light transmittance, whereas ITO-TiO₂-SiO₂ multilayer film provided a light transmittance of 97.2%.     

Evaluation of thermodynamic simulation (FactSage) for the interpretation of the presence of phases and the firing behavior of triaxial ceramics

The present work provides an evaluation of the thermodynamic calculation, using the FactSage software, which allows the study of the interaction of a system of various oxides. It started with the examination of the crystalline phases present in the raw materials indicated by the FactSage and compared with the analysis by XRD. Subsequently, the crystalline phases and the amount of liquid phase predicted by the software at different firing temperatures were analyzed. These results were compared with experimental data and records from the literature. The FactSage showed consistent results, managing to indicate the presence of the main phases in the raw materials; however, the actual and predicted secondary phases did not always coincide. The type of phase in the firing was correctly indicated, tridymite (stable phase above 867 °C), mullite and liquid phase, but their quantity in relation to the firing temperature was quite different from the experimental data.