Real-time infinite horizon tracking with data fusion for augmented reality in a maritime operations context

In this paper, we propose a method for real-time horizon tracking (i.e., separation line between the sky and the sea) in a maritime operations context. We present the fusion of an image processing algorithm with the data obtained from the inertial measurement unit (IMU). The initial aim is to filter out environmental conditions using inertial information in order to combine a video stream with onboard electronic charts. This is achieved by the detection of the horizon with an image processing algorithm in an area defined by the IMU. We then present an evaluation of the algorithm with regard to the rate of detection of the horizon and the impact of the image resolution on the computational time. The purpose of developing this method is to create an augmented reality maritime operations application. We combine the video stream with electronic charts in a single display. We use the position of the horizon in the image to split the display into different areas. Then, we use transparency to display the video, the electronic charts or both.     

Physical aging in polymers: Comparison of two ways of determining narayanaswamy's parameter

In this work, we have investigated by differential scanning calorimetry the enthalpy relaxation of two poly[methyl(α-n-alkyl)acrylates] in which it is possible to change the length of the two alkyl chains. In particular, we have evaluated the Narayanaswamy parameter, which controls relative contribution of temperature and of structure to the relaxation times, by two methods: Grenet's method (GM) and the peak-shift method (PSM). The data obtained show that both methods lead to equivalent results. Nevertheless, PSM requires fewer experiments than GM, and PSM appears to be more practical. The results obtained on the two acrylates show that the parameter x increases with the lateral chain length, that is to say, that the temperature effects increase as the length of the alkyl chain is increased.     

Application of ATR-FTIR for a rapid and simultaneous determination of sugars and organic acids in apricot fruit

A simple, fast and accurate Fourier transform mid-infrared spectroscopy method was developed for simultaneously determining sugar and organic acid contents in apricot fruit slurries using the attenuated total reflectance. The potential of this method coupled with chemometric techniques based on partial least squares was assessed by comparison with currently used enzymatic determination of sucrose, glucose, fructose, malic acid and citric acid. Fruits of eight contrasted cultivars harvested at different ripening stages were used in this study and randomly divided in a calibration set (505 apricots) and in a validation set (252 apricots). The most suitable region was found in the range between 1500 and 900 cm⁻¹. Good prediction performances were obtained (R² ? 0.74 and RMSEP ? 18%). Results concerning the prediction of other quality traits such as firmness, skin colour, ethylene production, soluble solids content and titratable acidity were discussed.     

Effect of freezing treatments and yeast amount on sensory and physical properties of sweet bakery products

The frozen bakery market has grown significantly in developed countries over the past decade.     

Rapid and non-destructive analysis of apricot fruit quality using FT-near-infrared spectroscopy

A non-destructive optical method based on near-infrared spectroscopy has been used for the evaluation of apricot fruit quality. Diffuse reflectance measurements (800–2500 nm), physical, physiological and biochemical measurements were performed individually on 877 apricot fruits from eight contrasted cultivars harvested at different ripening stages. Relationships between spectral wavelengths and quality attributes were evaluated by application of chemometric techniques based on partial least squares (PLS) on fruit set divided randomly into two groups: 598 fruits for calibration and 279 for validation. Good prediction performance was obtained for soluble solids and titratable acidity with correlation coefficients of 0.92 and 0.89 respectively and root mean square errors of prediction of 0.98% Brix and 3.62 meq 100 g⁻¹ FW respectively. For the other quality traits such as firmness, ethylene, individual sugars and organic acids, the prediction models were not satisfactorily accurate due to the high error of calibration and prediction.     

Comparing Al-SBA-15 Support and Pt/Al-SBA-15 Catalyst: Changes in Al Speciation and Acidic Properties Induced by the Introduction of Pt via Aqueous Medium

Differences between the acidic properties of silicoaluminic Pt-containing catalysts and those assessed on their parent supports have been reported in the literature and attributed to the presence of the metal nanoparticles and to their influence on the acid sites. It is shown here that for mesoporous materials containing various types of Al species, an alternative explanation can be proposed. ²⁷Al NMR spectroscopy, FTIR of adsorbed CO and probe catalytic tests suggest the redistribution of aluminium atoms upon contact of the parent support with the aqueous solution containing the Pt precursor. Upon contact with water and thermal treatment, strong and mild Brønsted sites (Si–O(H)–Al) transform into strong Lewis sites (isolated tetracoordinated Al atoms). As a consequence, it may not be straightforward to deduce the acidic properties of metal-containing catalysts supported on Al-containing mesoporous materials from those of the bare support, because the surface species may differ significantly.     

A DSS for Production Planning

This paper presents a decision support system designed to aid the production planner in choosing the values of the principle parameters governing just-in-time manufacturing. The DSS uses a knowledge base composed of data from simulations of the production of the entire product line under systematically varied conditions. The planners may add data from actual production experience as it is obtained. The stochastic dominance outranking method of Martel and Zaras allows the identification of clusters of parameters that respect the preferences of the decision maker. When launching an order for a product, the decision maker may judge certain sets of parameters to be equivalent. A visual interactive simulation model will then allow their comparison according to three performance criteria.     

"Cognitive-neuropsychological function in chronic physical aggression and hyperactivity": Correction to Séguin et al. (2004).

Reports an error in "Cognitive-Neuropsychological Function in Chronic Physical Aggression and Hyperactivity" by Jean R. Séguin, Daniel Nagin, Jean-Marc Assaad and Richard E. Tremblay (Journal of Abnormal Psychology, 2004[Nov], Vol 113[4], 603-613). The use of a weighted procedure within SAS PROC GLM inflated F statistics and underestimated standard errors that affected only conclusions from secondary analyses that were drawn about the specificity of working memory effects to physical aggression and hyperactivity. The corrected conclusions are presented in the erratum. The last two sentences of the abstract also needed to be corrected in order to reflect the new conclusions. The corrected sentences appear in the erratum as well. (The following abstract of the original article appeared in record 2004-20178-011.) Histories of violence and of hyperactivity are both characterized by poor cognitive-neuropsychological function. However, researchers do not know whether these histories combine in additive or interactive ways. The authors tested 303 male young adults from a community sample whose trajectories of teacher-rated physical aggression and motoric hyperactivity from kindergarten to age 15 were well defined. No significant interaction was found. In a 1st model, both histories of problem behavior were independently associated with cognitive-neuropsychological function in most domains. In a 2nd model controlling for IQ, general memory, and test motivation, the 3 working-memory tests (relevant to executive function) remained associated with physical aggression, and 1 remained associated with hyperactivity. These results support an additive model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Numerical Modelling of Thin-Walled Stainless Steel Structural Elements in Case of Fire

In this paper, the structural response of stainless steel thin-walled elements submitted to fire is analysed numerically by means of the geometrically and materially non-linear Finite Element program SAFIR, including imperfections. In order to make these simulations, two main changes in the program were made: (i) the code was changed in order to deal with the stainless steel 2D material constitutive law to be used with shell elements and (ii) the possibility of the program to take into account residual stresses with shell finite elements was introduced. The stainless steel stress–strain relationship at high temperatures was based on the one presented in part 1.2 of Eurocode 3. To model the strain hardening exhibited by the stainless steels, using the shell element formulation, an approximation to the Eurocode 3 constitutive law was needed. Local and global geometrical imperfections were considered in the simulations. The paper shows the influence of the residual stresses on the ultimate load-carrying capacity of thin-walled stainless steel structural elements in case of fire.     

HIx system thermodynamic model for hydrogen production by the Sulfur–Iodine cycle

The HI_x ternary system (H₂O–HI–I₂) is the latent source of hydrogen for the Sulfur–Iodine thermo-chemical cycle. After analysis of the literature data and models, a homogeneous approach with the Peng–Robinson equation of state used for both the vapor and liquid phase fugacity calculations is proposed for the first time to describe the phase equilibrium of this system. The MHV2 mixing rule is used, with UNIQUAC activity coefficient model combined with of hydrogen iodide solvation by water. This approach is theoretically consistent for HI_x separation processes operating above HI critical temperature. Model estimation is done on selected literature vapor–liquid, liquid–liquid, vapor–liquid–liquid and solid–liquid equilibrium data for the ternary system and the three binaries subsystems. Validation is done on the remaining literature data. Results agree well with the published data, but more experimental effort is needed to improve modeling of the HI_x system.