Biodegradable nanocomposites based on starch/polycaprolactone/compatibilizer ternary blends reinforced with natural and organo‐modified montmorillonite

In this article, biodegradable polymer/clay nanocomposites were prepared. The matrices used were based on blends of Polycaprolactone (PCL) and Anhydride‐Functional Polycaprolactone (PCL‐gMA) with Thermoplastic Starch (TPS). Nanocomposites films based on PCL/TPS and PCL/PCL‐g‐MA/TPS blends reinforced with 1 and 3 wt % of natural montmorillonite and two organo‐modified ones were prepared by melt intercalation followed by compression molding. The study was designed focusing on packaging applications. Grafting maleic anhydride onto PCL was efficient to improve PCL/TPS compatibility but did not modify matrix/nanoclay interaction. Matrix compatibilization and nanoclays increased the Youn?s modulus and slightly decreased the maximum stress of the TPS/PCL matrix. Nanoclay functionalization improved nanoclay dispersion in the blends but it was not reflected in mechanical properties improvements. The water adsorption of the compatibilized matrix was reduced after clay incorporation. A slight decrease in the biodegradation rate was observed with the addition of nanoclay. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44163.     

Performance of selected anion exchange resins for the treatment of a high DOC content surface water

The objective of this study was first to compare the performance of four strong anion exchange resins (AERs) (MIEX from Orica Pty Ltd, DOWEX-11 and DOWEX-MSA from DOW chemical and IRA-938 from Rohm and Haas) for their application in drinking water treatment (natural organic matter (NOM), mineral anions (nitrate, sulfate and bromide) and pesticide removal) using bench-scale experimental procedures on a high DOC content surface water. The efficiency of MIEX for NOM and mineral anions removal was furthermore evaluated using bench-scale dose-response experiments on raw, clarified and post-ozonated waters. NOM removal was assessed using the measurement of dissolved organic carbon (DOC), UV absorbance at 254 nm (UV254) and the use of high-performance size exclusion chromatography with UV (HPSEC/UV) and fluorescence detection (HPSEC/FLUO). The MIEX and IRA938 anionic resins exhibit a faster removal of NOM and mineral anions compared to the DOWEX11 and MSA AERs. All the resins were found to be very effective with similar performances after 30 to 45 min of contact time. As expected, only limited sorption of atrazine and isoproturon (C0=1 microg/L) occurred with MIEX, DOWEX11 and MSA AERs. MIEX resin proved to be very efficient in eliminating NOM of high-molecular weight but also a large part of the smallest UV absorbing organic compounds which were refractory to coagulation/flocculation treatment. Remaining DOC levels after 30 min of contact with MIEX were found similar in raw water, clarified water and even post-ozonated water implying no DOC benefit can be gained by employing conventional treatment prior to MIEX treatment. Removal of bromide (initial concentration 110 microg/L) was also observed and ranged from 30% to 65% for resin dose increasing from 2 to 8 mL/L. T     

Accumulation of heavy metals in circumpolar willow ptarmigan (Lagopus l. lagopus) populations

A circumpolar survey of heavy metals in willow ptarmigan liver and kidney revealed considerable variations in Cd content in Canada and Scandinavia. The Cd content in central Canada was comparable with that in Scandinavia and Russia, at least for kidney. However, in both liver and kidney the median for Canada as a whole was much higher than in the other countries. Some Canadian locations had exceptionally high levels, several birds having >50 mg kg(-1) in liver and >400 mg kg(-1) in kidney. In Norway, the Cd content was highest in central mountain areas in south Norway and inland locations in the two northernmost counties. Five locations in central and north Norway showed mean Cd levels in kidney above 100 mg kg(-1). It is difficult to evaluate regional differences in Sweden, but most locations had the same Cd level as moderately contaminated locations in Norway. Cd levels in Russia were comparable to moderately contaminated locations in the other countries. Due to a high intake of willow, naturally rich in Cd, direct comparison of the Cd level in willow ptarmigan from different locations cannot reveal the effects of long-range pollution. The Pb concentration in willow ptarmigan kidney and liver varied significantly in Norway and Canada, but not in Sweden and Russia. Levels in Sweden and Russia were comparable to those in Canada and low levels in Norway. The highest median value from all locations within countries was found in Norway, both in liver and kidney. The highest Pb content was found in south Norway, indicating an effect of long-range pollution in willow ptarmigan. The level in western Canada was significantly higher than in central Canada. The Hg content in liver varied significantly from one location to another in all the countries and in kidney everywhere except Sweden. In Scandinavia, there is no distinct regional pattern. Canada had a significantly higher Hg level in central than western regions in both tissues the opposite of that found for Cd and Pb. Cu and Zn showed significant variations from one location to another in liver and kidney in Canada and Norway, but only in kidney in samples from Sweden. Comparison between western and central Canada revealed a significant difference for Cu in liver, samples from central Canada having more. There are no significant differences from one country to another, but some localities in Canada seem to have higher Cu concentrations in kidney than are found in Scandinavia and Russia.     

Decision support systems in water resources in the demarcated region of Douro – case study in Pinhão river basin,Portugal

This paper puts forward the importance of decision support systems (DSS) for the planning and management of water resources. A case study of the Pinhão river basin, in Portugal, is presented. Given the importance of vineyards in the Douro region, it is important to determine if water availability will be enough to meet present and future water demands. In order to answer this question, DSS tools were used to assess different scenarios. The MIKE BASIN software was used in the hydrographical basin of Pinhão river, assisted by a geographic information system, GIS, which allowed the modelling of the basin, both temporally and spatially, facilitating the visualisation and interpretation of results. According to the attained results, it was verified that, at present, the hydrographical basin meets the considered water needs. The DSS proved to be an important tool to assist the decision‐making process in the studied river basin.     

Chlorination of bromide-containing waters: Enhanced bromate formation in the presence of synthetic metal oxides and deposits formed in drinking water distribution systems

Bromate formation from the reaction between chlorine and bromide in homogeneous solution is a slow process. The present study investigated metal oxides enhanced bromate formation during chlorination of bromide-containing waters. Selected metal oxides enhanced the decay of hypobromous acid (HOBr), a requisite intermediate during the oxidation of bromide to bromate, via (i) disproportionation to bromate in the presence of nickel oxide (NiO) and cupric oxide (CuO), (ii) oxidation of a metal to a higher valence state in the presence of cuprous oxide (Cu₂O) and (iii) oxygen formation by NiO and CuO. Goethite (α-FeOOH) did not enhance either of these pathways. Non-charged species of metal oxides seem to be responsible for the catalytic disproportionation which shows its highest rate in the pH range near the pK_a of HOBr. Due to the ability to catalyze HOBr disproportionation, bromate was formed during chlorination of bromide-containing waters in the presence of CuO and NiO, whereas no bromate was detected in the presence of Cu₂O and α-FeOOH for analogous conditions. The inhibition ability of coexisting anions on bromate formation at pH 8.6 follows the sequence of phosphate >> sulfate > bicarbonate/carbonate. A black deposit in a water pipe harvested from a drinking water distribution system exerted significant residual oxidant decay and bromate formation during chlorination of bromide-containing waters. Energy dispersive spectroscopy (EDS) analyses showed that the black deposit contained copper (14%, atomic percentage) and nickel (1.8%, atomic percentage). Cupric oxide was further confirmed by X-ray diffraction (XRD). These results indicate that bromate formation may be of concern during chlorination of bromide-containing waters in distribution systems containing CuO and/or NiO.     

Assessing the public health risk of microbial intrusion events in distribution systems: conceptual model, available data, and challenges

Low and negative pressure events in drinking water distribution systems have the potential to result in intrusion of pathogenic microorganisms if an external source of contamination is present (e.g., nearby leaking sewer main) and there is a pathway for contaminant entry (e.g., leaks in drinking water main). While the public health risk associated with such events is not well understood, quantitative microbial risk assessment can be used to estimate such risk. A conceptual model is provided and the state of knowledge, current assumptions, and challenges associated with the conceptual model parameters are presented. This review provides a characterization of the causes, magnitudes, durations and frequencies of low/negative pressure events; pathways for pathogen entry; pathogen occurrence in external sources of contamination; volumes of water that may enter through the different pathways; fate and transport of pathogens from the pathways of entry to customer taps; pathogen exposure to populations consuming the drinking water; and risk associated with pathogen exposure.     

Graphitization of carbon fibre/ glassy carbon composites

Carbon fibre/glassy carbon composites were prepared by aligning unidirectionally in furfuryl alcohol condensate the PAN-based carbon fibres treated at different temperatures and with different degrees of stretching. The graphitization of the composites was found to start at the boundary between the fibres and glassy carbon matrix, and to proceed into the matrix. This is considered to be due to the stress accumulation at the boundary caused by a large shrinkage of the matrix. The carbon fibres remain nongraphitized even after a heat-treatment at 2800°C. The composites heat-treated at high temperature (2800°C) are found to show a high overall degree of graphitization, unexpected on basis of the known graphitization behavior of carbon fibres and of glassy carbon, and a high degree of uniaxial preferred orientation of crystallites.     

Texture prediction of Bi2Te3 electroplated layers using Hartman's theory of crystal growth

An experimental study of electroplated thin films of bismuth telluride, R3m crystal structure, shows that fibre textures are observed during the growth of the layers. Several orientations 00.1, 10.10, 11.0, 10.4, 10.8, 01.5 and 10.0 are developed during the deposition process, then reach a final orientation. Hartman's theory of crystal growth based on the periodic bond chain (PBC) in a crystal lattice is usually applied. This explains the equilibrium shape of a crystal defined by F faces and the faces observed during the growth (S and K faces). It also successfully predicts the orientations observed in bismuth telluride from the beginning to the end of the layer deposition. The theory may also be applied to other deposition processes.     

湿蒸汽非均质高速凝结流动的数值研究

基于冠状成核机理,建立了湿蒸汽两相非均质凝结流动数值模型,对缩放喷管、汽轮机叶栅和汽轮机级内湿蒸汽两相非均质凝结流动进行了数值模拟．结果表明：与自发凝结相比,非均质凝结流动中杂质颗粒改变了凝结过程;杂质颗粒减小了喷管中凝结激波强度,改变了汽轮机叶栅中的压力分布,降低了蒸汽过冷度,减少了不平衡热力学损失;在汽轮机级内,非均质凝结流动的动、静叶进、出口汽流角接近过热蒸汽流动的动、静叶进、出口汽流角,其动叶前压力高于过热蒸汽的动叶前压力,但级反动度偏离过热蒸汽流动数值．