Cold Spray Deposition of Freestanding Inconel Samples and Comparative Analysis with Selective Laser Melting

Cold spray offers the possibility of obtaining almost zero-porosity buildups with no theoretical limit to the thickness. Moreover, cold spray can eliminate particle melting, evaporation, crystallization, grain growth, unwanted oxidation, undesirable phases and thermally induced tensile residual stresses. Such characteristics can boost its potential to be used as an additive manufacturing technique. Indeed, deposition via cold spray is recently finding its path toward fabrication of freeform components since it can address the common challenges of powder-bed additive manufacturing techniques including major size constraints, deposition rate limitations and high process temperature. Herein, we prepared nickel-based superalloy Inconel 718 samples with cold spray technique and compared them with similar samples fabricated by selective laser melting method. The samples fabricated using both methods were characterized in terms of mechanical strength, microstructural and porosity characteristics, Vickers microhardness and residual stresses distribution. Different heat treatment cycles were applied to the cold-sprayed samples in order to enhance their mechanical characteristics. The obtained data confirm that cold spray technique can be used as a complementary additive manufacturing method for fabrication of high-quality freestanding components where higher deposition rate, larger final size and lower fabrication temperatures are desired.     

Gallic acid water ozonation using activated carbon

The ozonation of gallic acid in water in the presence of activated carbon has been studied at pH 5. Hydrogen peroxide, ketomalonic and oxalic acids were identified as by-products. The process involves two main periods of reaction. The first period, up to complete disappearance of gallic acid, during which ozonation rates are slightly improved by the presence of activated carbon. The second one, during which activated carbon plays an important role as promoter, and total mineralization of the organic content of the water is achieved. The organic matter removal is due to the sum of contributions of ozone direct reactions and adsorption during the first period and to a free radical mechanism likely involving surface reactions of ozone and hydrogen peroxide on the carbon surface during the second period. There is a third transition period where by-products concentration reach maximum values and ozonation is likely due to both direct and free radical mechanisms involving ozone and adsorption. Discussion on the mechanism and kinetics of the process is also presented both for single ozonation and activated carbon ozonation.     

Antitumor efficacy of doxorubicin encapsulated within PEGylated poly(amidoamine) dendrimers

We report here a general approach to using poly(amidoamine) (PAMAM) dendrimers modified with polyethylene glycol (PEG) as a platform to encapsulate an anticancer drug doxorubicin (DOX) for in vitro cancer therapy applications. In this approach, PEGylated PAMAM dendrimers were synthesized by conjugating monomethoxypolyethylene glycol with carboxylic acid end group (mPEG‐COOH) onto the surface of generation 5 amine‐terminated PAMAM dendrimer (G5.NH₂), followed by acetylation of the remaining dendrimer terminal amines. By varying the molar ratios of mPEG‐COOH/G5.NH₂, G5.NHAc‐mPEG_n (n = 5, 10, 20, and 40, respectively) with different PEGylation degrees were obtained. We show that the PEGylated dendrimers are able to encapsulate DOX with approximately similar loading capacity regardless of the PEGylation degree. The formed dendrimer/DOX complexes are water soluble and stable. In vitro release studies show that DOX complexed with the PEGylated dendrimers can be released in a sustained manner. Further cell viability assay in conjunction with cell morphology observation demonstrates that the G5.NHAc‐mPEG_n/DOX complexes display effective antitumor activity, and the DOX molecules encapsulated within complexes can be internalized into the cell nucleus, similar to the free DOX drug. Findings from this study suggest that PEGylated dendrimers may be used as a general drug carrier to encapsulate various hydrophobic drugs for different therapeutic applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40358.     

Cytotoxic Triosmium Carbonyl Clusters: A Structure–Activity Relationship Study

A structure–activity relationship (SAR) study of the triosmium carbonyl cluster Os₃(CO)₁₀(NCCH₃)₂ was carried out with a series of clusters of the general formula Os₃(CO)_12?nL_n, cationic osmium clusters and a hemi‐labile maltolato‐Os cluster. The SAR results showed that good solubility in DMSO and at least one vacant site are required for cytotoxicity. In vitro evaluation of these new compounds showed that some are selectively active against estrogen receptor (ER)‐independent MDA‐MB‐231 breast cancer cell lines relative to ER‐dependent MCF‐7 breast cancer cells, suggesting that the compounds have a different biological target specific to MDA‐MB‐231 cells. In particular, the maltolato cluster exhibits strong antiproliferative activity, with an IC₅₀ value of 3 μM after only 24 h incubation. Additionally, biochemical assays conducted with the cationic cluster show that it induces apoptosis, although a biological target has not yet been identified. Further research to establish the molecular targets of these compounds and to develop improved organometallic clusters as potential breast cancer therapeutics is underway.     

A novel sediment gas sampler and a subsurface gas collector used for measurement of the ebullition of methane and carbon dioxide from a eutrophied lake

A novel sediment bubble gas sampler and a subsurface bubble gas collector were designed to measure the ebullition of gases from profundal sediments of aquatic ecosystems. The sediment gas sampler was constructed to collect bubble gas samples directly from the uppermost sediment layers for gas composition analysis. The floating subsurface gas collector, designed to trap the bubbles released naturally from sediments, permitted the measurement of both the volume and the composition of the bubble gas. Due to its low cost, light weight and rapid sampling capability, the gas collector is ideal for studies requiring many replicate collectors. These devices were used for measurement of the ebullition of methane (CH4) and carbon dioxide (CO2) during an open water period from hypereutrophic Lake Postilampi, situated within the midboreal zone in Finland. The bubble gas obtained from the sediment with the sediment gas sampler had higher concentrations of CH4 and CO2 than the bubbles trapped in the gas collectors. This indicated that the bubble gas composition changed, either naturally during the migration of the bubbles from the sediment through the water column to the gas collectors, and/or during their storage in the collectors prior to sampling. The mean CH4 ebullition from Lake Postilampi was estimated to be in the range from 36 to 46 mg m(-2 d(-1), based on the bubble gas CH4 concentrations measured from the gas collectors and sediment, respectively. The bubbles contained only 0.02-0.57% of CO2 and thus, the ebullition had no significance in the release of CO2 from the lake.     

Influence of the character of NOM on the ozonation of MIB and geosmin

Tastes and odours (T&Os) are a major concern in drinking water as they are not efficiently removed by conventional water treatment. Ozonation has been effective for their destruction in some studies. However, the natural organic matter (NOM) in waters can affect the ozonation process and subsequently affect the destruction of T&Os. Five NOM fractions were isolated and ozonated in synthetic waters. The fraction containing the more highly coloured, higher molecular weight compounds exhibited the highest ozone (O3) demand, whereas the low aromatic fraction exhibited the lowest O3 demand. The character of the NOM fractions influenced the ozonation of MIB and geosmin. The destruction of MIB and geosmin was significantly higher in the fraction with the highest colour and UV/visible absorbance at all O3 doses. The destruction of the compounds in the other fractions showed the same trends, increasing MIB and geosmin destruction with increasing UV/visible absorbing character of the NOM. MIB was also ozonated in two real waters. with results showing a competing effect between NOM concentration and NOM character. The O3 reaction time was shown to be important for the destruction of both compounds.     

Use of an environmental specimen bank for evaluating the impact of the Prestige oil spill on the levels of trace elements in two species of Fucus on the coast of Galicia (NW Spain)

In the present study we investigated possible contamination by trace elements due to the oil slick caused by the shipwreck of the Prestige oil tanker, in two species of brown macroalgae (Fucus vesiculosus and Fucus ceranoides) collected from the coastal area most severely affected by the spill (Galicia, NW Spain). The oil slick apparently did not cause significant increases in the concentrations of the trace elements studied, except vanadium. It appears that the magnitude of terrestrial inputs to coastal waters is sufficiently high to mask the inputs of trace elements from the fuel. The observed exception of V suggests that bioaccumulation of this element by the two species of Fucus may be used to indicate exposure to petrochemical products similar to the Prestige fuel. The findings of the study are another example of the importance of the existence of Environmental Specimen Banks for studies of this type.     

Design update,thermal and fluid dynamic analyses of the EU-HCPB TBM in vertical arrangement

In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB TBM) is developed in Forschungszentrum Karlsruhe (FZK) to investigate DEMO relevant concepts for blanket modules.The three main functions of a blanket module (removing heat, breeding tritium and shielding sensitive components from radiation) will be tested in ITER using a series of four TBMs, which are irradiated successively during different test campaigns. Each HCPB TBM will be installed, with a vertical orientation, into the vacuum vessel connected to one equatorial port. As the studies performed up to 2006 in FZK concerned a horizontal orientation of the HCPB TBM, a global review of the design is necessary to match with the new ITER specifications.A preliminary version of the new vertical design is proposed extrapolating the neutronic analysis performed for the horizontal HCPB TBM. An overview of the new HCPB TBM vertical designs, as well as the preliminary thermal and fluid dynamic analyses performed for the validation of the design, are presented in this paper. A critical review of the results obtained allows us, in the conclusion, to prepare a plan for the future detailed analyses of the vertical HCPB TBM.     

Screening and enumeration of lactic acid bacteria in milk using three different culture media in Petrifilm Aerobic Count plates and conventional pour plate methodology

This study aimed to compare Petrifilm Aerobic Count (AC) plates and the conventional pour plate methodology using de Mann-Rogosa-Sharpe (MRS), Kang-Fung (KF) and Kang-Fung-Sol (KFS) culture media for screening and enumeration of lactic acid bacteria (LAB) in milk. Suspensions of 10 LAB species in reconstituted powder skim milk and 30 raw milk samples, without experimental inoculation, were tested. For selective enumeration, all samples were previously diluted in MRS, KF and KFS broths and then plated in Petrifilm AC and conventional pour plate methodology, using the same culture media with added agar. All plates were incubated at 37 degrees C for 48 h in anaerobic conditions. Differences in the counts were observed only for raw milk samples using KFS in conventional methodology, when compared with the counts obtained from MRS and KF (P0.05). The results showed excellent correlation indexes between both methodologies using the three culture media for LAB suspensions (r=0.97 for MRS, KF and KFS). For raw milk samples, the correlation indexes were excellent (r=0.97, for MRS) and good (r=0.84 for KF, and r=0.82 for KFS), showing some interference in Petrifilm AC when supplements were added, especially lactic acid. These results indicate the possibility of using Petrifilm AC plates for enumeration of LAB in milk, even with the use of selective supplements.