Effect of Storage Conditions and Antioxidants on the Oxidative Stability of Sunflower–Chia Oil Blends

The mixture of different proportions of sunflower with chia oil provides a simple method to prepare edible oils with a wide range of desired fatty acid compositions. Sunflower–chia (90:10 and 80:20 wt/wt) oil blends with the addition of rosemary (ROS), ascorbyl palmitate (AP) and their blends (AP:ROS) were formulated to evaluate the oxidative stability during storage at two temperature levels normally used, cool (4 ± 1 °C) and room temperature (20 ± 2 °C) for a period of 360 days. Peroxide values (PV) of the oil blends with antioxidants stored at 4 ± 1 °C showed levels ≤10.0 mequiv O₂/kg oil; the lowest levels of PV were found for blends with AP:ROS. Values higher than 10.0 mequiv O₂/kg were observed between 120–240 days for oil blends stored at 20 ± 2 °C. Similar trends were observed with p-anisidine and Totox values. The oxidative stability determined by the Rancimat method and differential scanning calorimetry showed a greater susceptibility of the oils to oxidative deterioration with increasing unsaturated fatty acids content. The addition of antioxidants increased the induction time and decreased the Arrhenius rate constant, indicating an improvement in the oxidative stability for all the oil blends. Temperature had a strong influence on the stability of these blends during storage.     

Experimental Design Applied for Cost and Efficiency of Antioxidants in Biodiesel

Oxidation stability is a parameter of great importance for biodiesel quality control to both producers and subsequent consumers. To maintain the quality of biodiesel, currently the most effective and economical method is the addition of antioxidants that prevent or retard the biofuel oxidation reaction. In this study, efficiency and cost of synthetic antioxidants added to B100 biodiesel from soybean oil and pork fat were evaluated, using butylhydroxyanisole (BHA), butylhydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ), in pure form or in mixtures, according to a simplex-centroid mixture experimental design. Results demonstrate an increased induction period (IP) in all trials when compared to the control sample, and TBHQ was the only antioxidant alone that met all the specification standards, while BHT and BHA alone met only the American standard specifications. The antioxidant mixture that presented the highest synergistic effect was that of TBHQ and BHA. Multi-response optimization indicated an optimum formulation containing 75 % TBHQ and 25 % BHA with an IP of 7.27 h at 110 °C and the antioxidant mixture cost of 31.31 USD, to be added for a ton of biodiesel. This simplex-centroid mixture experimental design shows an ability to be applied in the biodiesel, oils and fats industry to evaluate the oxidation stability and the occurrence of synergism between different mixtures of synthetic or natural antioxidants and their costs.     

Artificial enzyme with magnetic properties and peroxidase activity on indoleamine metabolite tumor marker

Stable and easily-handled synthetic materials mimicking natural enzymes activity would find important biotechnological applications. This article describes the synthesis and characterization of magnetic molecularly imprinted catalytic polymers that exhibit peroxidase-like activity towards 5-hydroxyindole-3-acetic acid (5-HIAA) oxidation. This multifunctional material is obtained from highly crystalline magnetite nuclei coated with a silica layer to protect the iron nucleus from oxidation and to provide anchoring for hydroxyl surface groups. After acrylic functionalization via sol–gel process, a molecularly imprinted polymer with hemin as catalytic center and 5-HIAA as template has been successfully attached to the structure. The resulting hybrid composite is magnetically separable and possesses excellent catalytic ability for the selective oxidation of the indoleamine metabolite tumor marker, showing Michaelis–Menten kinetics with this molecule but not towards other structural analogs. Therefore, it can be considered an artificial peroxidase enzyme.     

Effect of combining ethylene/methyl acrylate/glycidyl methacrylate terpolymer and an organoclay on the toughening of poly(lactic acid)

Blends of poly(lactic acid) (PLA) and ethylene/methyl acrylate/glycidyl methacrylate terpolymer (EMA‐GMA) with and without the addition of an organoclay were prepared by melt mixing in a twin screw extruder. Mechanical, morphological, structural, and rheological properties of the systems have been investigated as function of its compositions. The impact strength (IS) of PLA increased with the addition of EMA‐GMA. Furthermore, the addition of 2.5 wt% of organoclay to the PLA/EMA‐GMA blend promoted improvements in the mechanical properties, such as IS, tensile strength, and strain‐at‐break. Further addition of organoclay, 5 wt%, led to a formation of a double percolated network, where the clay particles form bridges across EMA‐GMA droplets and glue them together, however, without coalescence. In addition, morphological and wide‐angle X‐ray scattering analyses evidenced that the clay presents a partially exfoliated structure and that remains inside the EMA‐GMA droplets, probably as a consequence of the approach used to produce the systems. POLYM. ENG. SCI., 54:1922–1930, 2014. © 2013 Society of Plastics Engineers     

Fatigue crack initiation and damage characterization in Brazilian test specimens for adhesive joints

The present study is focused on the fatigue failure initiation at bimaterial corners by means of a configuration based on the Brazilian disc specimens. These specimens were previously used for the generalized fracture toughness determination and prediction of failure in adhesive joints, carried out under static compressive loading. Under static loading, local yielding effects might affect the asymptotic two-dimensional linear elastic stress representation under consideration. Fatigue loading avoids this fact due to the lower load levels used. The present tests were performed using load control; video microscopy and still cameras were used for monitoring initiation and crack growth. The fatigue tests were halted periodically and images of the corner were taken where fatigue damage was anticipated. Damage initiation and subsequent crack growth were observed in some specimens, especially in those which presented brittle failure under static and fatigue tests. These analyses allowed the characterization of damage initiation for a typical bimaterial corner that can be found in composite to aluminium adhesive lap joints.     

Continuous electrochemical reduction of carbon dioxide into formate using a tin cathode: Comparison with lead cathode

Electrochemical reduction has been pointed out as a promising method for CO₂ valorisation into useful chemicals. This paper studies the influence of key variables on the performance of an experimental system for continuous electro-reduction of CO₂ to formate, when a tin plate is used as working electrode. Particular emphasis is placed on comparing the performance of Sn and Pb as cathodes. As was previously found with Pb, the influence of current density (“j”) using Sn was particularly noteworthy, and when j was raised up to a limit value of 8.5 mA cm⁻², important increases of the rate of formate production were observed at the expense of lowering the Faradaic efficiency. However, unlike what was found with Pb, the performance using Sn improved when the electrolyte flow rate/electrode area ratio was increased within the range studied (0.57–2.3 mL min⁻¹ cm⁻²). In this way, the use of Sn as cathode allowed achieving rates of formate production that were 25% higher than the maximum rates obtained with Pb, together with Faradaic efficiencies close to 70%, which were 15 points higher than those with Pb. These results reinforce the interest in Sn as electrode material in the electro-reduction of CO₂ to formate.     

One-pot synthesis of gelatin-based,slow-release polymer microparticles containing silver nanoparticles and their application in anti-fouling paint

Gelatinous polymer matrix microparticles containing silver nanoparticles (AgNPs) were prepared by a novel method to obtain quasi non-swelling anti-fouling paint additives with slow-release characteristics. A w/o type dispersion were elaborated with the aqueous phase of gelatin, urea, silver-nitrate and formaldehyde dispersed in linseed oil. Gelatin was cross-linked by formaldehyde, together with urea for limiting the swelling of the product. Silver-nitrate was reduced with the assistance of gelatin and formaldehyde into homogenously dispersed AgNPs. The microparticles and embedded AgNPs were visualized by scanning and transmission electronmicroscopy. Encapsulated AgNPs with ∼18 nm crystallite size were identified by X-ray powder diffraction. Characterization of gelatin–urea–formaldehyde polymer matrices was carried out by attenuated total reflectance FTIR spectroscopy. Silver dissolution from microparticles and paints with AgNP-containing microparticles was measured by inductively coupled plasma spectrometer and resulted in highly sustained release, compared to unmodified gelatin microparticles and paints containing uncapsulated silver salts. A 7-month-long fouling experiment run in natural sweetwater media showed that solvent-based acrylic paint with AgNPs-containing gelatinous microparticles as additives offered resistance against biofouling at low Ag-release ratio.     

Optimized silyl ester diblock methacrylic copolymers: A new class of binders for chemically active antifouling coatings

This work focuses on the assessment of the erosion properties and antifouling (AF) performance of silyl ester copolymer-based coatings through laboratory and field tests. Silyl ester diblock copolymers were synthesized via the reversible addition-fragmentation chain transfer polymerization and were selected as binders for developing copper-free chemically active coatings. AF coatings were subsequently prepared using biocides (Sea-Nine™ 211, Preventol^® A4S, and zinc pyrithione). Laboratory-based bioassays, targeting the growth of selected microorganisms (bacteria and microalgae) and barnacle settlement, highlighted that the silyl ester methacrylic-based binders did not inhibit the growth of microorganisms, are essentially non-toxic to nauplii and reduced the settlement of Amphibalanus amphitrite cyprids. The corresponding biocidal coatings are potent toward bacteria and diatoms but were demonstrated to be toxic against the barnacle larvae. Field test results showed variations with geographical locations: in sub-tropical area, the silyl ester methacrylic-based coatings failed to inhibit the settlement of barnacles; however, field tests performed in Mediterranean Sea for 18 months demonstrated that biocidal silyl ester methacrylic-based coatings were promising candidates.     

NSAID-Based Coordination Compounds for Biomedical Applications: Recent Advances and Developments

After the serendipitous discovery of cisplatin, a platinum-based drug with chemotherapeutic effects, an incredible amount of research in the area of coordination chemistry has been produced. Other transition metal compounds were studied, and several new relevant metallodrugs have been synthetized in the past few years. This review is focused on coordination compounds with first-row transition metals, namely, copper, cobalt, nickel or manganese, or with zinc, which have potential or effective pharmacological properties. It is known that metal complexes, once bound to organic drugs, can enhance the drugs’ biological activities, such as anticancer, antimicrobial or anti-inflammatory ones. NSAIDs are a class of compounds with anti-inflammatory properties used to treat pain or fever. NSAIDs’ properties can be strongly improved when included in complexes using their compositional N and O donor atoms, which facilitate their coordination to metal ions. This review focuses on the research on this topic and on the promising or effective results that complexes of first-row transition metals and NSAIDs can exhibit.