Single and Polycrystalline Transparent Ceramic Armor with Different Crystal Structure

Contrary to the moderate ballistic advantage of Al₂O₃ ceramics over MgAl₂O₄ polycrystals, the present study shows a reverse ratio of the ballistic strength of alumina and spinel single crystals: Spinel single crystals outperform sapphire and exhibit a similarly high stability as submicrometer Al₂O₃ ceramics. The results correlate with different cleavage of single crystalline spinel and sapphire, changing the fragmentation on ballistic impact.     

Multtphase Materials with Lignin. III. Polyblends with Ethylene-Vinyl Acetate Copolymers

Abstract

Organosolv lignin (OSL) from red oak, and its corresponding hydroxypropyl lignin (HPL) derivative, were blended in the melt with polyethylene and with ethylene-vinyl acetate (EVA) copolymer, and injection molded. Lignin (derivative) content and vinyl acetate (VA) content both served as process variables. All mixtures produced immiscible blends, both by scanning electron microscopy and dynamic mechanical analysis. However, the compatibility of the two polymers increased with VA content. Both lignin products proved to be effective modulus builders, but. HPI, was more effective than OSL at VA contents above 20%. Modulus increased roughly in accordance with the rule of mixing. Inferior tensile strength properties were observed with the EVA copolymer if VA content was below 10%, and superior characteristics were noted in materials containing more than 25% VA and between 5 and 20% HPL.     

Design and Fabrication of Transparent and Gas‐Tight Optical Windows in Low‐Temperature Co‐Fired Ceramics

Low‐temperature co‐fired ceramics (LTCC) enable the fabrication of microfluidic elements such as channels and embedded cavities in electrical devices. Hence, LTCC facilitate the realization of complex and integrated microfluidic devices. Examples can be applied in many areas like reaction chambers for synthesis of chemical compounds. However, for many applications it is necessary to have an optically transparent interface to the surroundings. The integration of optical windows in LTCC opens up a wide field of new and innovative applications such as the observation of chemiluminescent reactions. These chemical reactions emit electromagnetic radiation and thus offer a method for noninvasive detection. Thin glasses (≤500 μm) were bonded by thermocompression onto a LTCC substrate. As the bonding agent, a glass frit paste was used. Borosilicate glasses, fused silica as well as silicon were successfully bonded onto LTCC. To join materials with a large coefficient of thermal expansion mismatch (i.e., fused silica and LTCC), it is necessary to limit the heat input to the bond interface. Therefore, a heating structure was integrated into the LTCC substrate beneath the bond interface. This bonding process provides a gas‐tight optical port with a high bond strength.     

Impact of an Altered Wnt1/β-Catenin Expression on Clinicopathology and Prognosis in Clear Cell Renal Cell Carcinoma

In renal cell carcinoma (RCC), single members of the Wnt/β-catenin signaling cascade were recently identified to contribute to cancer progression. However, the role of Wnt1, one of the key ligands in β-catenin regulation, is currently unknown in RCC. Therefore, alterations of the Wnt1/β-catenin axis in clear cell RCC (ccRCC) were examined with regard to clinicopathology, overall survival (OS) and cancer specific survival (CSS). Corresponding ccRCCs and benign renal tissue were analyzed in 278 patients for Wnt1 and β-catenin expression by immunohistochemistry in tissue microarrays. Expression scores, including intensity and percentage of stained cells, were compared between normal kidney and ccRCCs. Data was categorized according to mean expression scores and correlated to tumor and patients’ characteristics. Survival was analyzed according to the Kaplan-Meier and log-rank test. Univariable and multivariable Cox proportional hazard regression models were used to explore the independent prognostic value of Wnt1 and β-catenin. In ccRCCs, high Wnt1 was associated with increased tumor diameter, stage and vascular invasion (p ≤ 0.02). High membranous β-catenin was associated with advanced stage, vascular invasion and tumor necrosis (p ≤ 0.01). Higher diameter, stage, node involvement, grade, vascular invasion and sarcomatoid differentiation (p ≤ 0.01) were found in patients with high cytoplasmic β-catenin. Patients with a high cytoplasmic β-catenin had a significantly reduced OS (hazard ratio (HR) 1.75) and CSS (HR 2.26), which was not independently associated with OS and CSS after adjustment in the multivariable model. Increased ccRCC aggressiveness was reflected by an altered Wnt1/β-catenin signaling. Cytoplasmic β-catenin was identified as the most promising candidate associated with unfavorable clinicopathology and impaired survival. Nevertheless, the shift of membranous β-catenin to the cytoplasm with a subsequently increased nuclear expression, as shown for other malignancies, could not be demonstrated to be present in ccRCC.     

LAS glass–ceramic scaffolds by three-dimensional printing

Highly porous (>60% open porosity) glass–ceramic scaffolds with remarkable mechanical properties (compression strength of ～15 MPa) were produced by indirect 3D printing. Precursor glass powders were printed into 3D ordered structures and then heat treated to sinter and develop crystalline phases. The final glass–ceramic contained a β-spodumene solid solution together with a secondary phase of lithium disilicate.The precision of the printed geometry and the density of the struts in the scaffold depended on several processing parameters (e.g. powder size and flowability, layer thickness) and were improved by increasing the binder saturation and drying time. Two types of powders with different particle size distribution (PSD) and flowability were used. Powders with a larger PSD, could be processed within a wider range of printing parameters due to their good flowability; however, the printing precision and the struts density were lower compared to the scaffolds printed using the powder in a smaller average PSD.     

Flue gas cleaning by periodic absorption

Simulations and designs are presented of conventional and periodic SO₂ absorption from exhaust gases using salt water as absorption solvent. Operating conditions resemble those of a maritime operation, involving relatively small amounts of SO₂, so the separation is in the linear region. The advantages of periodic operation, as already demonstrated for conventional distillation remain valid for absorption processes: Less tall towers, than staged towers are possible, or substantially less salt water is required for the process employing periodic cycling.     

Evaluation of a Radiolabeled Macrocyclic Peptide as Potential PET Imaging Probe for PD−L1

The interaction between the immune checkpoint PD-1 and PD−L1 promotes T-cell deactivation and cancer proliferation. Therefore, immune checkpoint inhibition therapy, which relies on prior assessment of the target, has been widely used for many cancers. As a non-invasive molecular imaging tool, radiotracers bring novel information on the in vivo expression of biomarkers (e. g., PD−L1), enabling a personalized treatment of patients. Our work aimed at the development of a PD−L1-specific, peptide-based PET radiotracer. We synthesized and evaluated a radiolabeled macrocyclic peptide adapted from a patent by Bristol Myers Squibb. Synthesis of [⁶⁸Ga]Ga-NJMP1 yielded a product with a radiochemical purity>95 % that was evaluated in vitro. However, experiments on CHO−K1 hPD−L1 cells showed very low cell binding and internalization rates of [⁶⁸Ga]Ga-NJMP1 in comparison to a control radiopeptide (WL12). Non-radioactive cellular assays using time-resolved fluorescence energy transfer confirmed the low affinity of the reported parent peptide and the DOTA-derivatives towards PD−L1. The results of our studies indicate that the macrocyclic peptide scaffold reported in the patent literature is not suitable for radiotracer development due to insufficient affinity towards PD−L1 and that C-terminal modifications of the macrocyclic peptide interfere with important ligand/receptor interactions.     

Interaction of titanium diboride/boron nitride evaporation boats with aluminium

Hexagonal boron nitride/titanium diboride composites are widely used as evaporation boats for aluminium deposition to produce functional and decorative layers on different target materials. The lifetime of such a material is limited mainly by the interaction of the metal with the ceramic substrate, but the corrosion mechanism has still not yet been thoroughly investigated and understood. In this article the corrosion mechanism for the evaporation boats used was investigated using thermodynamic calculations, FESEM, EDX and XRD phase analysis. The analysis showed that hexagonal boron nitride (hBN), which is thermodynamically less stable than TiB₂, is passivated during the application process through the formation of AlN surface layers, whereas the thermodynamically more stable TiB₂ phase dissolves and Ti-rich components precipitate in cooler regions of the evaporation boats.