Characterization of Precursor-Derived Silicon-Carbon-Nitrogen Ceramics after Creep Testing

Precursor-derived Si-C-N ceramics after creep testing in air were characterized using X-ray diffractometry (XRD) and transmission electron microscopy (TEM). XRD analysis showed that the crept Si-C-N ceramics were covered by an α-cristobalite layer. TEM observations revealed that the precipitated nanocrystallites in the crept Si-C-N ceramics were β-SiC. Between α-cristobalite and crept Si-C-N ceramic, there was an intermediate zone in which Si₂N₂O nanocrystallites were distributed homogeneously. Moreover, Si₂N₂O nanocrystallites were often found covering the surface of nanosized gas channels in the crept Si-C-N ceramics, where no α-cristobalite phase was detected. Based on these observations, a two-step oxidation mechanism of Si-C-N ceramics during creep testing in air was proposed.     

IISPH‐FLIP for incompressible fluids

We propose to use Implicit Incompressible Smoothed Particle Hydrodynamics (IISPH) for pressure projection and boundary handling in Fluid‐Implicit‐Particle (FLIP) solvers for the simulation of incompressible fluids. This novel combination addresses two issues of existing SPH and FLIP solvers, namely mass preservation in FLIP and efficiency and memory consumption in SPH. First, the SPH component enables the simulation of incompressible fluids with perfect mass preservation. Second, the FLIP component efficiently enriches the SPH component with detail that is comparable to a standard SPH simulation with the same number of particles, while improving the performance by a factor of 7 and significantly reducing the memory consumption. We demonstrate that the proposed IISPH‐FLIP solver can simulate incompressible fluids with a quantifiable, imperceptible density deviation below 0.1%. We show large‐scale scenarios with up to 160 million particles that have been processed on a single desktop PC using only 15GB of memory. One‐ and two‐way coupled solids are illustrated.     

The Failure of the Strong Pumping Lemma for Multiple Context-Free Languages

Seki et al. (Theor. Comput. Sci. 88(2):191–229, 1991) showed that every m-multiple context-free language L is weakly 2m-iterative in the sense that either L is finite or L contains a subset of the form \(\{ u_{0} w_{1}^{i} u_{1} \cdots w_{2m}^{i} u_{2m} \mid i \in \mathbb {N}\}\) , where w ₁?w _2n ≠ε. Whether every m-multiple context-free language L is 2m-iterative, that is to say, whether all but finitely many elements z of L can be written as z=u ₀ w ₁ u ₁?w _2m u _2m with w ₁?w _2m ≠ε and \(\{ u_{0} w_{1}^{i} u_{1} \cdots w_{2m}^{i} u_{2m} \mid i \in \mathbb {N}\} \subseteq L\) , has been open. We show that there is a 3-multiple context-free language that is not k-iterative for any k.     

Quantifying the evolution of TTCN-3 as a language

Ten years of maintenance, nine published revisions of the standards for the Testing and Test Control Notation version 3 (TTCN-3), more than 500 change requests since 2006, and 10 years of activity on the official TTCN-3 mailing list add up to a rich history, not unlike that of many successful Open Source Software (OSS) projects. In this article, we contemplate TTCN-3 in the context of software evolution and examine its history quantitatively. We mined the changes in the textual content of the standards, the data in change requests from the past 5 years, and the mailing list archives from the past 10 years. In addition, to characterize the use of the TTCN-3 we investigated the meta-data of the contributions at the TTCN-3 User Conference, and the use of language constructs in a large-scale TTCN-3 test suite. Based on these data sets, we first analyze the amount, density, and location of changes within the different parts of the standard. Then, we analyze the activity and focus of the user community and the maintenance team in both the change request management system and the official TTCN-3 mailing list. Finally, we analyze the distribution of contributions at the TTCN-3 User Conference across different topics over the past 8 years and construct use anomalies during the development of a large-scale test suite. Our findings indicate that the TTCN-3 is becoming increasingly stable as the overall change density and intensity, as well as the number of change requests are decreasing, despite the monotonous increase in the size of the standards.     

An axisymmetric model for thread forming in polycarbonate and polypropylene screw and boss fasteners

Plastic boss and screw fasteners are an economical means of securing automotive components, such as instrument or body panels. However, new materials and/or suboptimal design present challenges to the boss/screw effectiveness. Failure of a boss/screw can result is loss of functional performance or increased squeak and rattle. Failure is often controlled by what occurs during the initial thread‐forming process. Thus, the goal of this paper is to develop an FEA model to elucidate the thread‐forming process so that we can facilitate subsequent design and/or process optimization, and understand potential failure modes. The FEA must accommodate nonlinear couplings, such as large strain and heat transfer. Heat generation is present in the forms of interfacial shear heating and plastic work associated with the large deformation of the interface between the boss and screw. Strain rate‐dependent materials are included using the Eyring theory for plastic flow of polymeric materials. Results of the model are presented and compared to experimentally determined torque curves and temperatures. Polym. Eng. Sci. 44:1498–1508, 2004. © 2004 Society of Plastics Engineers.     

Is the particle deposition in a cell exposure facility comparable to the lungs? A computer model approach

Abstract

Cell exposure experiments at the air-liquid interface (ALI) are used increasingly as indicators for health effects and for the impact of aerosols on the lung. Thereby the aerosol particles are kept airborne and can deposit on a cell surface area similar to the human respiratory tract (RT). However, geometry and air flow rates of an ALI system deviate considerably from the RT. As the tissue-delivered particle dose to the lungs (TD) can hardly be measured, computer models of particle deposition are used here to mimic both the particle deposition at ALI and in the RT. An ALI exposure setup (VitroCell GmbH) for an airflow rate of 100 cm³ min^?1 is selected, where the particle deposition model has been verified experimentally. For the RT we use the hygroscopic lung deposition model of Ferron et al. (2013 Ferron, G. A., S. Upadhyay, R. Zimmermann, and E. Karg. 2013. Model of the deposition of aerosol particles in the respiratory tract of the rat. II. Hygroscopic particle deposition. J. Aerosol Med. Pulm. Drug Deliv. 26 (2):101–19. doi:10.1089/jamp.2011.0965.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]). Model runs are performed for the particle deposition and for the deposited particles per surface area in both the ALI and the RT. The results show that the ALI-deposited mass is 1-2 orders of magnitude higher than in the alveolar region, because the surface area of the lung region is substantially larger. A particle size range from 40 to 450 nm is identified, where the ratio of both the deposition in a lung region and the deposition at the ALI varies by a factor less than two. Mean values for this ratio are 31 and 101 for the tracheo-bronchial and the alveolar region, respectively. The same size range is found for the ratio of the deposited particles per surface area in a lung region and at the ALI. For this range the mean surface deposition at the ALI is 23- and 1575-times larger than in the tracheo-bronchial and the alveolar lung region, respectively. The effect is partly compensated by different flow rate and cell size.

Copyright © 2020 American Association for Aerosol Research     

Proline versus charge concept for protein stabilization against proteolytic attack

The virtue of the so-called ‘proline concept’ andthe ‘charge concept’ for stabilizing protease-susceptibleregions of a protein structure was compared on bovine pancreaticribonuclease A. Alanine 20 and serine 21, both of whichare located in a loop that is susceptible to the unspecificproteases subtilisin Carlsberg, subtilisin BPN', proteinaseK and elastase, were replaced with proline or lysine by site-directedmutagenesis. The rate constant of proteolysis was decreasedby up to three orders of magnitude for the proline mutants dependingon the site of the mutation and the protease used. In contrast,substitution by lysine increased the proteolytic resistanceby only one order of magnitude characterizing the ‘prolineconcept’ as superior to the ‘charge concept’.Although the four applied proteases are considered to be unspecific,the degree of stabilization of the ribonuclease molecule variedconsiderably, indicating the impact of individual differencesin their substrate specificity on the proteolytic resistanceand degradation pathway of the target protein. Received May 12, 2003; revised October 23, 2003; accepted October 30, 2003