Discontinuous Space-Vector Modulation for Three-Level PWM Rectifiers

This paper presents the implementation and experimental verification of two discontinuous pulsewidth modulation (DPWM) methods for three-phase, three-level rectifiers. DPWM's features, such as improved waveform quality, lower switching losses, reduced ac-side passive component size, are investigated and compared to the conventional continuous pulsewidth modulation (CPWM). These features allow higher power density and/or efficiency to be achieved and are important targets for the next generation of power rectifiers. The implementation of the two DPWM strategies is explained by means of space-vectors representation and modulation functions. A detailed analysis of both ac-side and dc-side current waveforms is presented, and there is excellent agreement between the analytical, simulated and experimental results for the mains current ripple amplitude and output center-point current over the practical modulation range. Finally, the control of the center-point voltage is discussed.     

电力电子技术中虚拟原型和综合多目标优化技术研究(上)

新的拓扑结构,新的调制方法和未来的宽能带隙的半导体器件技术将会满足电力电子系统更高效率,更高功率密度和更低成本的要求。但是,在设计过程中通过使用多范畴/多目标优化,亦即对设计变量都用最优值,也能显著地提高目前技术系统的性能。为了实现这些优化,首先需要对主电路建立一个综合的数学模型,包括热模型,DM和CM EMI滤波器模型。基于这些模型,可以得到诸如效率,功率密度等的多目标优化。优化可以充分地使用所有的设计自由度,也允许确定根据诸如功率半导体器件的品质因数或磁芯材料的性质等基本技术决定的系统性能的敏感度。而且,能够容易地比较不同拓扑结构和识别固有性能的限制。本文首先描述设计一个电力电子变换器的主要功能要素的分析途径和一个线性设计过程。接着连接诸如电、磁、热和热-机设计范畴的元件模型,讨论基于这些连接模型的各个设计变量的优化。最后,研究不同范畴的耦合和实施这些耦合的等效电路的利用实例。     

Synthesis and characterization of maghemite nanosheets

Magnetic maghemite nanoparticles in the form of nanosheets were prepared by a topotactic transformation during the dehydroxylation of a γ-FeO(OH) precursor. The precursor was synthesized from tetrapyridin Fe(II) chloride (Fe(py)₄Cl₂). The nanosheets are several hundreds of nanometers wide, and less than 5 nm thick; they frequently bend and curl at the edges; they are nanocrystalline; and they are composed of smaller maghemite nanostructured domains, from a few nanometers up to several tens of nanometers wide.     

Pump Characteristic based optimization of a direct water cooling system for a 10-kW/500-kHz Vienna rectifier

An ultra high power density 10-kW/500-kHz three-phase pulse-width modulation rectifier (Vienna Rectifier) is under development at the Power Electronic Systems Laboratory, ETH Zurich. From preliminary measurements and numerical simulations the total efficiency is assumed to be 95% at full load, resulting in power losses of up to 150 W in each multichip power module that realizes a bridge leg of the rectifier. In order to maintain the required power density of the system high direct water cooling is employed where water is in direct contact with the module base plate. Based on the measured characteristic of the water pump (pressure drop dependent on the water flow rate) the geometry of different water channel structures below the module base plate is systematically optimized based on equations which are formulated using well-established fluid dynamics theory. The design optimization is constrained by the desire to keep the geometry of the water channels in a range which allows simple and low-cost manufacturing. The aim is to find a channel structure resulting in a minimum thermal resistance of the power module for a given pump characteristic. In this paper, a very simple slot channel is investigated. The dependency of the thermal resistance on the cooling system is calculated for various heights of the slot channel, and an optimized channel height is determined using the condition of simple manufacturability. The shortcomings of the simple slot structure are discussed, and a novel metallic inlay structure is introduced and optimized that results in a reduction of the thermal resistance of the direct water cooling scheme as compared to the slot channel system. All theoretical considerations are experimentally verified. The general optimization scheme introduced in this paper can easily be adapted to other cooling problems.     

Do simultaneous inventions sleep? A case study on nursing sleeping papers

Simultaneous inventions and Sleeping papers are two interesting phenomena in scientific discovery and knowledge development processes, however they were not yet researched as a single occurrence. To close this gap, we performed a bibliometric study in which we analysed if simultaneous discoveries can also be subjected to delayed recognition. The analysis was performed on four already identified nursing Sleeping Papers and resulted in one Sleeping simultaneous invention. Sleeping simultaneous inventions or partially sleeping inventions may represent a valuable source for improved understanding about knowledge development processes and are worth candidates for future research.

     

Vergleich, Dimensionierung und Realisierung einphasiger Power Factor Correctors minimalen Realisierungsaufwands

In the future laws and restrictions will limit the amplitudes of the low frequency harmonics of mains currents of rectifier systems. While diode bridges are very simple, compact and cheap, their input current shows high low-order harmonics. In the past various rectifier systems have been developed that avoid low-order input current harmonics by means of active current control. The significantly reduced input filter results in a small and compact total rectifier system. In this paper different rectifier systems are discussed and compared. Since industry is interested in simple and cheap solutions the rectifier systems are discussed under these considerations. Besides an introduction of different power circuits and control schemes, the systematic choice of the power semiconductors is presented.     

Strong Hydrogen Bonds in Acetylenedicarboxylic Acid Dihydrate

Acetylenedicarboxylic acid dihydrate (ADAD) represents a complex with strong hydrogen bonding between the carboxylic OH and the water molecule. An X-ray re-examination of the ADAD crystal structure confirms the O^…O distance of the short hydrogen bonds, and clearly shows different bond lengths between the two oxygen atoms with respect to the carbon atom in the carboxyl group, indicating a neutral structure for the complex. The neutral structure was also confirmed by vibrational spectroscopy, as no proton transfer was observed. The diffraction studies also revealed two polymorph modifications: room temperature (α) and low temperature (β), with a phase transition at approximately 4.9 °C. The calculated vibrational spectra are in satisfactory agreement with the experimental spectra. A comparison of the structure and the vibrational spectra between the ADAD and the oxalic acid dihydrate reveals some interesting details. The crystal structures of both crystal hydrates are almost identical; only the O^…O distances of the strongest hydrogen bonds differ by 0.08 Å. Although it was expected that a larger O^…O spacing in the ADAD crystal may significantly change the infrared and Raman spectra, especially for the frequency and the shape of the acidic OH stretching vibration, both the shape and frequency are almost identical, with all subpeaks topped on the broad OH stretching vibration. The O^…O distance dependent are only in- and out-of-plane OH deformations modes. The presence of polarons due to the ionized defects was not observed in the vibrational spectra of ADAD. Therefore, the origin of the broad OH band shape was explained in a similar way to the acid dimers. The anharmonicity of a potential enhances the coupling of the OH stretching with the low-frequency hydrogen bond stretching, which, in addition to the Fermi resonance, structures the band shape of the OH stretching. The fine structure found as a superposition of a broad OH stretching is attributed to Davydov coupling.     

Did Sleeping Papers in nursing research miss their target audience?

Scientometrics - Various factors have been attributed for delayed recognition of Sleeping Papers, for example introducing new technologies which didn’t yet exist, or proposing ideas that were...