Bringing Time-Sensitive Networking to Wireless Professional Private Networks

Wireless Personal Communications - Private professional environments such as manufacturing industry, warehouses, hospitals, airports, among others, increasingly rely on end-to-end connected...     

<Emphasis Type="Italic">T</Emphasis><Subscript>2</Subscript> mapping of cerebrospinal fluid: 3 T versus 7 T

Object

Cerebrospinal fluid (CSF) T ₂ mapping can potentially be used to investigate CSF composition. A previously proposed CSF T ₂–mapping method reported a T ₂ difference between peripheral and ventricular CSF, and suggested that this reflected different CSF compositions. We studied the performance of this method at 7 T and evaluated the influence of partial volume and B ₁ and B ₀ inhomogeneity.

Materials and methods

T ₂-preparation-based CSF T ₂-mapping was performed in seven healthy volunteers at 7 and 3 T, and was compared with a single echo spin-echo sequence with various echo times. The influence of partial volume was assessed by our analyzing the longest echo times only. B ₁ and B ₀ maps were acquired. B ₁ and B ₀ dependency of the sequences was tested with a phantom.

Results

T _2,CSF was shorter at 7 T compared with 3 T. At 3 T, but not at 7 T, peripheral T _2,CSF was significantly shorter than ventricular T _2,CSF. Partial volume contributed to this T ₂ difference, but could not fully explain it. B ₁ and B ₀ inhomogeneity had only a very limited effect. T _2,CSF did not depend on the voxel size, probably because of the used method to select of the regions of interest.

Conclusion

CSF T ₂ mapping is feasible at 7 T. The shorter peripheral T _2,CSF is likely a combined effect of partial volume and CSF composition.

     

Pheromonal Cues Deposited by Mated Females Convey Social Information about Egg-Laying Sites in <Emphasis Type="Italic">Drosophila Melanogaster</Emphasis>

Individuals can make choices based on information learned from others, a phenomenon called social learning. How observers differentiate between which individual they should or should not learn from is, however, poorly understood. Here, we showed that Drosophila melanogaster females can influence the choice of egg-laying site of other females through pheromonal marking. Mated females mark territories of high quality food by ejecting surplus male sperm containing the aggregation pheromone cis-11-vaccenyl acetate (cVA) and, in addition, deposit several sex- and species-specific cuticular hydrocarbon (CHC) pheromones. These pheromonal cues affect the choices of other females, which respond by preferentially laying eggs on the marked food. This system benefits both senders and responders, as communal egg laying increases offspring survival. Virgin females, however, do not elicit a change in the egg-laying decision of mated females, even when food has been supplemented with ejected sperm from mated females, thus indicating the necessity for additional cues. Genetic ablation of either a female’s CHC pheromones or those of their mate results in loss of ability of mated females to attract other females. We conclude that mated females use a pheromonal marking system, comprising cVA acquired from male ejaculate with sex- and species-specific CHCs produced by both mates, to indicate egg-laying sites. This system ensures information reliability because mated, but not virgin, females have both the ability to generate the pheromone blend that attracts other flies to those sites and a direct interest in egg-laying site quality.     

Toxicity of parked motor vehicle indoor air

The interior of motor vehicles is made of a wide variety of synthetic materials, which emit volatile organic compounds (VOC). We tested the health effects of emissions from vehicles exposed to "parked in sunshine" conditions. A new and a 3 year old vehicle with identical interior were exposed to 14 000 W of light. Indoor air was analyzed by GC-MS. Toxicity of extracts of indoor air was assayed in human primary keratinocytes, human lung epithelial A549 cell line, and Chinese hamster V79 lung fibroblasts. In addition, toxicity after metabolic activation by CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, and CYP2E1 was assayed. The effect on type I allergic reaction (IgE-mediated immune response), type IV allergic reaction (T-cell mediated immune response), and irritative potential was evaluated also. A total of 10.9 and 1.2 mg/m(3) VOC were found in new and used motor vehicle indoor air, respectively. The major compounds in the new vehicle were o,m,p-xylenes, C3 and C4-alkylbenzenes, dodecane, tridecane, and methylpyrrolidinone. In the used vehicle they were acetone, methylpyrrolidinone, methylcyclohexane, acetaldehyde, o,m,p-xylenes, ethylhexanol, and toluene. No toxicity was observed in any cell line with or without metabolic activation. Neither did we find an effect on type IV sensitization or an irritative potential. A slight but statistically significant aggravating effect on IgE-mediated immune response of only the new vehicle indoor air was determined (p < 0.05). The IgE-response modulating effect of indoor air might be relevant for atopic individuals. Else no direct toxicity, no toxicity after metabolic activation by cytochrome P450, and no irritative or type IV sensitizing potential of motor vehicle indoor air were found, neither from the new nor used vehicle. Our investigations indicated no apparent health hazard of parked motor vehicle indoor air.     

A virus-based single-enzyme nanoreactor

Most enzyme studies are carried out in bulk aqueous solution, at the so-called ensemble level, but more recently studies have appeared in which enzyme activity is measured at the level of a single molecule, revealing previously unseen properties. To this end, enzymes have been chemically or physically anchored to a surface, which is often disadvantageous because it may lead to denaturation. In a natural environment, enzymes are present in a confined reaction space, which inspired us to develop a generic method to carry out single-enzyme experiments in the restricted spatial environment of a virus capsid. We report here the incorporation of individual horseradish peroxidase enzymes in the inner cavity of a virus, and describe single-molecule studies on their enzymatic behaviour. These show that the virus capsid is permeable for substrate and product and that this permeability can be altered by changing pH.     

Unraveling Protein Interactions between the Temperate Virus Bam35 and Its Bacillus Host Using an Integrative Yeast Two Hybrid–High Throughput Sequencing Approach

Bacillus virus Bam35 is the model Betatectivirus and member of the family Tectiviridae, which is composed of tailless, icosahedral, and membrane-containing bacteriophages. Interest in these viruses has greatly increased in recent years as they are thought to be an evolutionary link between diverse groups of prokaryotic and eukaryotic viruses. Additionally, betatectiviruses infect bacteria of the Bacillus cereus group, which are known for their applications in industry and notorious since it contains many pathogens. Here, we present the first protein–protein interactions (PPIs) network for a tectivirus–host system by studying the Bam35–Bacillus thuringiensis model using a novel approach that integrates the traditional yeast two-hybrid system and high-throughput sequencing (Y2H-HTS). We generated and thoroughly analyzed a genomic library of Bam35′s host B. thuringiensis HER1410 and screened interactions with all the viral proteins using different combinations of bait–prey couples. Initial analysis of the raw data enabled the identification of over 4000 candidate interactions, which were sequentially filtered to produce 182 high-confidence interactions that were defined as part of the core virus–host interactome. Overall, host metabolism proteins and peptidases were particularly enriched within the detected interactions, distinguishing this host–phage system from the other reported host–phage PPIs. Our approach also suggested biological roles for several Bam35 proteins of unknown function, including the membrane structural protein P25, which may be a viral hub with a role in host membrane modification during viral particle morphogenesis. This work resulted in a better understanding of the Bam35–B. thuringiensis interaction at the molecular level and holds great potential for the generalization of the Y2H-HTS approach for other virus–host models.     

The influence of maltodextrins on the structure and properties of compression‐molded starch plastic sheets

Starch plastic sheets were prepared by compression molding of starch‐based plastic granulates. The granulates were prepared by extrusion processing of mixtures of granular potato starch and several maltodextrins (5% w/w) in the presence of glycerol and water as plasticizers and lecithin as melt flow accelerator. The materials were semicrystalline, containing B‐type, V_h‐type, and E_h‐type crystallinity. The properties were dependent on water content. For the materials, a brittle‐to‐ductile transition occurred at a water content in the range of 11–12%, which was in accordance with the observed glass transition temperature. The structural and mechanical properties were a function of starch composition and maltodextrin source as well as molding temperature. The amount of granular remnants and residual B‐type crystallinity decreased with increasing processing temperature. The amount of recrystallized single‐helical amylose increased with increasing temperature. At molding temperatures in the range of 180–200°C, a sharp decrease in starch molecular mass occurred. The influence of molding temperature was reflected in a sharp increase in elongation at molding temperature above 160°C and a gradual decrease in elastic modulus. The tensile strength showed an initial small increase up to 160°C and a sharp decrease at higher molding temperatures. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2207–2219, 1999