技术发展为未来手机铺路

预计到2009年,大部分移动终端系统都将配备各式各样的无线存取技术,用以处理多媒体信息。要为这种发展趋势作好准备,业界就必须从现在开始积极创新无线频射(RF)设计。     

Unique orientation of lamellae in film processed poly (phenylene sulfide)

The morphology of poly(phenylene sulfide), PPS, obtained as processed film has been studied using wide angle X-ray scattering (WAXS), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). A unique morphology has been identified in the original film. The spherulites are very small in size and possess a cylindrical symmetry with their lamellae oriented on the edge. In these processed PPS films, the a-axis of the lattice is preferentially aligned perpendicular to the film plane, while the b and c axes are predominantly in the film plane. In the PPS isothermally crystallized from the melted, original film, there is no such preferential orientation. Thermal analysis of the original and melt crystal-lized PPS shows that while the degree of crystallinity is about the same, the nature of the amorphous phase in the two materials is different. In the original film, we did not observe a heat capacity increment at a glass transition temperature by DSC, indicating that all of the amorphous phase belongs to the category of rigid amorphous phase. In the melt crystallized PPS, a distinct glass transition was seen, though only a portion of the amorphous phase becomes mobile at T_g. The differences in orientation and mobility of the amorphous phase in the original film compared to melt crystallized PPS are explained by the different thermal processing procedures used for the two materials.     

Functional, Nutritional, and Rheological Properties of Protein Powders from Arrowtooth Flounder and their Application in Mayonnaise

ABSTRACT: Arrowtooth flounder soluble protein powder (AFSP) and arrowtooth flounder insoluble protein powder (AFISP) were evaluated for their functional, nutritional, and rheological properties. AFSP and AFISP contained 80% and 79% protein and 5.9% and 14.9% fat, respectively. Yield of AFSP (8.6%) was less than AFISP (13.1%). AFSP and AFISP had desirable essential amino acid and mineral contents. Emulsion stability of AFSP was greater than AFISP. Fat and water absorptions (mL/g protein) were 5.2 and 1.8 for AFSP, respectively, and 3.3 and 4.2 for AFISP Mayonnaises made from AFSP had greater emulsion stability than mayonnaise made from AFISP. Mayonnaises from both AFSP and AFISP possessed pseudoplastic and viscoelastic characteristics.     

Influence of medium-chain triglycerides on lipid metabolism in the rat

Lipid metabolism was studied in rats fed diets containing corn oil, coconut oil, or medium-chain triglyceride (MCT), a glyceride mixture containing fatty acids of 8 and 10 carbons in length. The ingestion of MCT-supplemented, cholesterolfree diets depressed plasma and liver total lipids and cholesterol as compared with corn oil-supplemented diets. In rats fed cholesterol-containing diets, plasma cholesterol levels were not influenced by dietary MCT, but liver cholesterol levels were significantly lower than in animals fed corn oil. In vitro cholesterol synthesis from acetate-1-¹⁴C was lower in liver slices of rats that consumed MCT than in similar preparations from corn oil-fed rats. Studies of fatty acid carboxyl labeling from acetate-1-¹⁴C and the conversion of palmitate-1-¹⁴C to C₁₈ acids by liver slices showed that chain-lengthening activity is greater in the liver tissue of rats fed MCT than in the liver of animals fed corn oil. The hepatic fatty acid desaturation mechanisms, evaluated by measuring the conversion of stearate-2-¹⁴C to oleate, was also enhanced by feeding MCT. Adipose tissue of rats fed MCT converts acetate-1-¹⁴C to fatty acids at a much faster rate than does tissue from animals fed corn oil. Evidence is presented to show that the enhanced incorporation of acetate into fatty acids by the adipose tissue of rats fed MCT represents de novo synthesis of fatty acids and not chain-lengthening activity. Data are also presented on the fatty acid composition of plasma, liver, and adipose tissue lipids of rats fed the different fats under study.     

Likelihood of a marine vessel accident from wind energy development in the Atlantic

Offshore wind energy development is planned for areas off the Atlantic coast. Many of the planned wind development areas fall within traditional commercial vessel routes. In order to mitigate possible hazards to ships and to wind turbines, it is important to understand the potential for increased risk to commercial shipping from the presence of wind farms. Risk is identified as the likelihood that an occurrence will happen, and the consequences of that occurrence, should it occur. This paper deals with the likelihood of commercial vessel accidents, because of the development of offshore wind energy along the US Atlantic coast. Using Automatic Identification System (AIS) data, historical shipping routes between ports in the Atlantic were identified, from Maine to the Florida Straits. The AIS data were also used as inputs to a numerical model that can simulate cargo, tanker and tug/towing vessel movement along typical routes. The model was used to recreate present day vessel movement, as well as to simulate future routing that may be required to avoid wind farms. By comparing the present and future routing of vessels, an analysis of potential maritime accidents was used to determine the increased marginal risk of vessel collisions, groundings and allisions with stationary objects, because of the presence of wind farms. The outcome of the analysis showed little increase in vessel collisions or allisions, and a decrease in groundings as more vessels were forced seaward by the wind farms. Copyright © 2015 John Wiley & Sons, Ltd.     

Finite Element Methods for a System of Dispersive Equations

The present study is concerned with the numerical approximation of periodic solutions of systems of Korteweg–de Vries type, coupled through their nonlinear terms. We construct, analyze and numerically validate two types of schemes that differ in their treatment of the third derivatives appearing in the system. One approach preserves a certain important invariant of the system, up to round-off error, while the other, somewhat more standard method introduces a measure of dissipation. For both methods, we prove convergence of a semi-discrete approximation and highlight differences in the basic assumptions required for each. Numerical experiments are also conducted with the aim of ascertaining the accuracy of the two schemes when integrations are made over long time intervals.     

Influences of processing conditions on mechanical properties of recycled epoxy-anhydride vitrimers

The chemically crosslinked network structures make epoxies, the most common thermosets, unable or hard to be recycled, causing environmental problems and economic losses. Epoxy-based vitrimers, polymer networks deriving from epoxy resins, can be thermally malleable according to bond exchange reactions (BERs), opening the door to recycle epoxy thermosets. Here a series of experiments were carried out to study the effects of processing conditions (such as particle size distributions, temperature, time, and pressure) on recycling of an epoxy-anhydride vitrimer. Polymer powders from the epoxy-anhydride vitrimer with different size distributions were prepared and characterized, and the influence of particle size on the mechanical performance of recycled epoxy-anhydride vitrimers was investigated by dynamic mechanical analysis and uniaxial tensile test. Experimental results demonstrated that finer polymer powders can increase the contacting surfaces of recycled materials and thus result in high quality of recycled materials. In addition, the influences of other treating parameters, such as temperature, time, and pressure, were also discussed in this study. Adjusting these treating parameters can help the design of an optimized reprocessing procedure to meet practical engineering applications.     

Terpenoids as major precursors of dissolved organic matter in landfill leachates,surface water,and groundwater

13C NMR analyses of hydrophobic dissolved organic matter (DOM) fractions isolated from a landfill leachate contaminated groundwater near Norman, OK; the Colorado River aqueduct near Los Angeles, CA; Anaheim Lake, an infiltration basin for the Santa Ana River in Orange County, CA; and groundwater from the Tomago Sand Beds, near Sydney, Australia, found branched methyl groups and quaternary aliphatic carbon structures that are indicative of terpenoid hydrocarbon precursors. Significant amounts of lignin precursors, commonly postulated to be the major source of DOM, were found only in trace quantities by thermochemolysis/gas chromatography/mass spectrometry of the Norman Landfill and Tomago Sand Bed hydrophobic DOM fractions. Electrospray/tandem mass spectrometry of the Tomago Sand Bed hydrophobic acid DOM found an ion series differing by 14 daltons, which is indicative of aliphatic and aryl-aliphatic polycarboxylic acids. The product obtained from ozonation of the resin acid, abietic acid, gave a similar ion series. Terpenoid precursors of DOM are postulated to be derived from resin acid paper sizing agents in the Norman Landfill, algal and bacterial terpenoids in the Colorado River and Anaheim Lake, and terrestrial plant terpenoids in the Tomago Sand Beds.     

Maximum-Likelihood Seismic Deconvolution

The purpose of this paper is to describe a broad spectrum of seismic deconvolution problems and solutions which we refer to collectively as maximum-likelihood (seismic) deconvolution (MLD). Our objective is to perform deconvolution and wavelet estimation for the case of nonminimum phase wavelets. Our approach is to exploit state-variable technology, maximum-likelihood estimation, and a sparse spike train (Bernoulli-Gaussian) model for the reflection signal. Our solution requires detection of significant reflectors, wavelet and variance identification (nonlinear optimization), and estimation of the spike density parameter.     

Development and evaluation of terminally epoxidized triglycerides for coatings applications

Epoxidized 10-undecenoic acid triglyceride, an experimental seed oil derivative that has a terminal epoxy group on each of the three acyl glyceride segments, has been found to have good reactivity with amine curatives and allows room temperature cures to be obtained. Coatings based on epoxidized 10-undercenoic acid triglyceride have also shown excellent UV stability. As an example, coatings samples placed in a QUVA chamber exhibit no loss in gloss after 3000 hr of a cycled exposure to high intensity UV lamps and moisture at temperatures of 50–60°C. In comparison, coatings based on standard liquid epoxy resins (LERs) and commercially available hydrogenated LERs lose gloss due to chalking/decomposition within 200–800 hr. Presented at the 81 st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.