EVALUATING SOFTWARE OUTSOURCING OPTIONS Do Your Software Operations Add Value ?

If you don't know the current productivity rates, usage volumes, and other quantitative baseline data for your software operations, then software might not be a key component of the company's core business. The evaluation criteria in this article can help the IS executive determine the outsourcing options for software operations.     

The rationale for cementless total hip replacement

Current cementing techniques of distal plugging, pulsatile water cleaning of the canal, and retrograde filling with PMMA in a low-viscous state prepared using porosity reduction techniques and then pressurized have been shown to give excellent results at 10 or more years after operation. However, physical and aging characteristics of PMMA do not guarantee that those results will hold up in the 20- to 30-year time frame. Fifteen-year experience with bony ingrowth systems indicate the development of a durable interface without PMMA, although the interface does appear more vulnerable to attack by the biologic reaction to HMWPE debris. Bone remodeling appears more favorable around proximally fixed bone ingrowth prostheses than around distally fixed prostheses. Softening of the physical characteristics of the stem tip may reduce the incidence of thigh pain. Patients with high activity potential and a life expectancy of greater than 25 years should be strongly considered for a proximally fixed bone ingrowth or ongrowth prosthesis.     

Efficient computation of time-varying and adaptive filters

Two techniques for efficient computation of filters that support time-varying coefficients are developed. These methods are forms of distributed arithmetic that encode the data, rather than the filter coefficients. The first approach efficiently computes scalar-vector products, with which a digital filter is easily implemented in a transpose-form structure. This method, based on digital coding, supports time-varying coefficients with no additional overhead. Alternatively, distributed-arithmetic schemes that encode the data stream in sliding blocks support efficient direct-form filter computation with time-varying coefficients. A combination of both of these techniques greatly reduces the computation required to implement LMS adaptive filters     

A novel cyclic process using CaSO<Subscript>4</Subscript>/CaS pellets for converting sulfur dioxide to elemental sulfur without generating secondary pollutants: Part I. Feasibility and kinetics of the reduction of sulfur dioxide with calcium-sulfide pellets

Certain new sulfide-smelting processes and coal-gasification processes generate high-strength sulfur dioxide streams, for which a new process for converting sulfur dioxide to elemental sulfur needs to be developed because no process exists that is generally and economically applicable to the treatment of such streams. A thermodynamic and experimental investigation to develop a new process for converting sulfur dioxide to elemental sulfur by a cyclic process involving calcium sulfide and calcium sulfate without generating secondary pollutants was carried out. In this process, the starting raw material, calcium sulfate, is reduced by a suitable reducing agent, such as hydrogen, to produce calcium sulfide, which is used to reduce sulfur dioxide to elemental sulfur vapor and calcium sulfate. The latter is, in turn, reduced to regenerate calcium sulfide. In this Part I, detailed experimental results are presented on the kinetics of the reaction between sulfur dioxide and calcium-sulfide pellets, which produces elemental sulfur and calcium sulfate. The experiments were carried out at temperatures between 1023 and 1088 K and sulfur-dioxide partial pressures between 9 and 60 kPa by the use of a thermogravimetric analysis (TGA) technique. The rate of this reaction was demonstrated by the conversion of 40 pct calcium-sulfide pellets obtained from the hydrogen reduction of fresh calcium sulfate in 10 minutes at 1073 K under a sulfur-dioxide partial pressure of 43 kPa. The reactivity decreased somewhat during the first three cycles but remained largely unchanged thereafter up to the tenth cycle. This characteristic of the pellets is important because the solids must be reusable for repeated cycles to avoid generating secondary pollutants. A pore-blocking model was found to fit the reaction rate. The reaction is first order with respect to sulfur-dioxide partial pressure and has an activation energy of 101 to 134 kJ/mol (24 to 32 kcal/mol) for calcium-sulfide pellets reacted and regenerated several different times. Sulfur dioxide-containing streams from certain sources, such as the regenerator off-gas from an integrated-gasification, combined-cycle, desulfurization unit and new sulfide-smelting plants, contain much higher partial pressures of SO₂. In these cases, the rate of the first reaction is expected to be proportionally higher than in the test conditions reported in this article. The reduction kinetics of calcium-sulfate pellets with hydrogen gas is reported in the accompanying Part II.     

Microbiological denitrification of red beet juice

The purpose of study was the determination of optimal conditions for red beet juice denitrification by Paracoccus denitrificans bacteria as well as the evaluation of the usefulness of microbiologically treated juice for the production of a natural colouring preparation for foods. Total reduction of nitrates was found during bacterial culturing at 25 and 30 °C, at an initial pH of 7.0-8.0 and juice osmotic pressure of 900-1100 mOsm/kg. Microbiological denitrification procedure affected colour, taste and aroma of the juice. However, the use of juice as food colouring and component was made feasible by acidification and partial evaporation of water together with volatile substances.     

Suspension force and mechanism of debris flows

The paper discusses the postulated suspension force, by which it is possible to explain some enigmatic phenomena observed in different types of mass movements. This force is generated in thick suspensions as a result of friction between sinking solid particles and static water. The suspension force is related to the seepage force but they have opposite directions. Both forces form flow networks. Having explained the suspension force, the paper describes how this influences the movement of material, particularly in debris flows. Enigmatic features and the mechanism of debris flows and lahars are explained by virtue of the suspension force. Electronic Publication