Formation of phase structure and crystallization behavior in blends containing polystyrene–polyethylene block copolymers

The microphase separation structure in the molten state and the structure formation in crystallization from such ordered melt were investigated for the blends of polystyrene–polyethylene block copolymers (SE) with polystyrene homopolymer (PS) and polyethylene homopolymer (PE) and for the blends consisting of two kinds of SE with different copolymer compositions from each other, using synchrotron small-angle X-ray scattering techniques (SAXS). The copolymer compositions of SE block copolymers employed were 0.34, 0.58 and 0.73 wt. fraction of PE, and their melt morphologies were cylindrical, lamellar and lamellar, respectively. Macrophase separation or the morphology change in the melt occurred depending on the molecular weight and the blend composition, as reported so far. In crystallization from such macrophase-separated and microphase-separated melts, the melt morphology was completely kept for all the blends. Crystallization behavior was also investigated for the blends. The crystallization within the spherical and cylindrical domains surrounded by glassy PS was not observed for SE/PS blends. In the crystallization from the macrophase-separated melt, two exothermal peaks were observed in the DSC measurements, while a single peak was observed for other blends. For the blends with PS, the degree of crystallinity was depressed and the apparent activation energy of crystallization was high, compared to those for the corresponding neat SE. For SE/PE and SE/SE blends, those were changed depending on the blend composition.     

The dynamic contact area of elastomers at different velocities

The friction in tribo-systems that contain viscoelastic materials, such as elastomers, is relevant for a large number of applications. Examples include tyres, hoses, transmission and conveyor belts. To quantify the friction in these applications, one must first understand the contact behaviour of such viscoelastic materials, both in static and in dynamic situations. This work discusses an experimental study into the change of the contact area with the sliding velocity and relates the change in contact area with the mechanical properties of the elastomer. The results show that for a tribo-system containing an elastomer, there is a threshold velocity, above which the size of the contact area significantly reduces.     

Characterization of PA-12 specimens fabricated by projection sintering at various sintering parameters

Large area projection sintering (LAPS) promises to be a new method in the field of additive manufacturing. Developed in the Mechanical Engineering Department, University of South Florida, LAPS uses long exposure times over a broad area of powder to fuse into dense, reproducible materials. In contrast, LS, a common powder-based additive manufacturing, uses a focused beam of light scanned quickly over the material. Local regions of concentrated high-energy bursts of light lead to higher peak temperatures and differing cooling dynamics and overall crystallinity. The mechanical properties of laser sintered specimens suffer because of uneven particle fusion. LAPS offers the capacity to fine-tune fusion properties through enhanced thermodynamic control of the heating and cooling profiles for sintering. Further research is required to identify the relationship between LAPS build settings and part properties to enable the fabrication of custom parts with desired properties. This study examines the influence of LAPS sintering parameters on chemical structures, crystallinity, mechanical, and thermal properties of polyamide-12 specimens using powder X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, small-angle X-ray scattering, scanning electron microscopy, and microhardness testing. It was observed that higher crystallinity was imparted to specimens that were sintered for a shorter time and vice versa.     

Effect of heat treatment on the efficiency of Mg anodes

Commercial magnesium anodes were evaluated using ASTM G 97-89 for a standard test along with a technique of electrochemical impedance. Several heat treatments were performed, and the anodic efficiency was determined, showing an incremental increase of 10 to 12 % of the efficiency demonstrated by the nontreated commercial anodes (as-cast condition). The increase in efficiency was related to the microstructural characteristics. The appearance of second phase particles influenced the form of the corrosion process.     

FT²EI: A Dynamic Fault-Tolerant Routing Methodology for Fat Trees with Exclusion Intervals

Fault tolerance in the interconnection network of large clusters of PCs is an issue of growing importance, since their increasing size also increases the failure probability. The fat-tree topology is usually used in these machines since it has become very popular among high-speed interconnect manufacturers. This paper proposes a new distributed fault-tolerant routing methodology for fat trees. Unlike other previous proposals, it does not require additional network hardware, and its memory requirements, switch hardware, and routing delay scales up with the network size. Indeed, it nullifies only the strictly necessary paths, allowing adaptive routing through the healthy paths. The methodology is based on enhancing the interval routing scheme with exclusion intervals. Exclusion intervals are associated to each switch output port and represent the nodes that are unreachable from this port after a fault. We propose a methodology to identify the links where the exclusion intervals must be updated after a fault, the values to write on them, and a very efficient mechanism to distribute the required information through the network without stopping the system activity. Our methodology can tolerate a high number of network failures with a low degradation in performance. Moreover, it can achieve zero packet losing during the updating period.     

Boosting the confidence of new product development teams: The role of team boundary spanning,team size and functional diversity

In today's highly interconnected, uncertain and dynamic business environment, team boundary spanning has become an important determinant of the performance of new product development (NPD) projects. Despite the positive evidence supporting the use of boundary spanning activities by NPD teams, little is still known about how boundary spanning teams become high-performance teams. The current study advances research on this subject by examining the mediating effect of team potency on the relationship between team boundary spanning and new product performance, as well as the moderating effects of team size and functional diversity on the relationship between team boundary spanning and team potency. Data from a time-lagged survey study of 140 NPD projects found that team boundary spanning can promote team potency that, in turn, results in greater new product quality and new product creativity. The positive effect of team boundary spanning on team potency was found to be more pronounced for NPD teams of medium size and high levels of functional diversity.     

Photoacoustic‐Guided Surgery with Indocyanine Green‐Coated Superparamagnetic Iron Oxide Nanoparticle Clusters

A common cause of local tumor recurrence in brain tumor surgery results from incomplete surgical resection. Adjunctive technologies meant to facilitate gross total resection have had limited efficacy to date. Contrast agents used to delineate tumors preoperatively cannot be easily or accurately used in the real‐time operative setting. Although multimodal imaging contrast agents are developed to help the surgeon discern tumor from normal tissue in the operating room, these contrast agents are not readily translatable. This study has developed a novel contrast agent comprised solely of two Food and Drug Administration approved components, indocyanine green (ICG) and superparamagnetic iron oxide (SPIO) nanoparticles—with no additional amphiphiles or carrier materials, to enable preoperative detection by magnetic resonance (MR) imaging and intraoperative photoacoustic (PA) imaging. The encapsulation efficiency of both ICG and SPIO within the formulated clusters is ≈100%, and the total ICG payload is 20–30% of the total weight (ICG + SPIO). The ICG–SPIO clusters are stable in physiologic conditions; can be taken up within tumors by enhanced permeability and retention; and are detectable by MR. In a preclinical surgical resection model in mice, following injection of ICG–SPIO clusters, animals undergoing PA‐guided surgery demonstrate increased progression‐free survival compared to animals undergoing microscopic surgery.