Zur numerischen Pumpversuchsauswertung in Mehrschichtgrundwasserleitern

The analysis of well tests conducted in complex geological units is often not well suited with classical analytical approaches. Numerical simulators are usually needed to account for unconventional test conditions in order to analyze data which do not fit within analytical theory. In the current work, a numerical method for simulating pumping tests is adopted, which was developed about 30 years ago in the UK. The method is expanded within the present work to allow for a consistent analysis of pumping tests, vertical interference tests, pressure pulse tests, drillstem tests, and slug tests. Two-layer formations and their dual permeability equivalents can be treated by the implemented model including nonlinear well entrance losses. The application of the model is demonstrated for a pumping test conducted in the Oligocene base formation at the Teltow-Plateau south of Berlin. The test aimed at investigating potential leakages between this poor water quality base formation and overlying high water quality aquifers envisioned for future drinking water exploitation.     

Berechnung der Anlaufdaten von Asynchron-Käfigläufermotoren verschiedener Stabformen mit der Methode der finiten Differenzen

Übersicht Die spannungsabhängigen Anlaufströme und Drehmomente eines 2800 kW Asynchron-Käfigläufermotors werden mit der Methode der finiten Differenzen und einem neuen Block-SOR-Iterationsverfahren berechnet. Es wird ber die Ergebnisse für Rechteck-, Trapez- und andere Rotorstabformen berichtet. Die numerisch berechneten Daten werden mit den nach konventionellen Regeln ermittelten Zahlen verglichen. Der Sättigungseffekt ist unerwartet groß, als Folge des großen Nennstrombelages. Die ungesättigten werte stimmen sehr gut überein.

---

On the calculation of the starting data of A.C. squirrel-cage motors with different bar shapes by the method of finite differences

Contents The voltage dependent starting currents and torques of a 2,800 kW 3-phase a.c. squirrel cage motor are calculated by the method of finite differences using a new block-SOR iteration technique. The paper describes the results for different rotor bars with rectangular, trapezoidal and other shapes. The calculated data are compared with conventionally determined figures. The saturation effect is rather large due to the high values of the rated current loading per air gap periphery. The unsaturated values agree very good.

     

Internet traffic engineering

The main goal of Internet traffic engineering is to efficiently optimize the performance of operational networks in order to avoid the well-known shortcomings of the typical destination-based IP routing. Traffic engineering attempts to reduce or even avoid congestion hot spots and to improve resource utilization across the backbone IP network. During the last years traffic engineering has become an inevitable tool concerning performance optimization in large Internet backbones. The core objective of this paper is to give an overview of the architectures and mechanisms for traffic engineering.     

Nichtlinearer digitaler Reibungsbeobachter zur adaptiven Reibungskompensation bei Bewegungsregelungen

Friction can deteriorate the tracking behavior of motion control. By use of a friction observer an estimated value of the friction can be determined and through adaptive compensation of the friction its influence can be weakened. The following article developes a new digital nonlinear friction observer on ground of an already known continuous nonlinear friction observer, which can easily be parametrized. A mechanical model is used to compare this nonlinear friction observer with a linear one during simulations and real time investigation. The investigation shows that the effect of deterioration of the tracking behavior through friction is less significant with the new digital nonlinear friction observer than with the linear friction observer.     

Shape optimization of inclined ribs as heat transfer augmentation device

This work presents numerical optimization techniques for the design of a rectangular channel with inclined ribs toenhance turbulent heat transfer.The response surface method with Reynolds-averaged Navier-Stokes analysis isused for optimization.Shear stress transport turbulence model is used as a turbulence closure.Computational re-sults for local heat transfer rate show a reasonable agreement with the experimental data.Width-to-rib height ratioand attack angle of the rib are chosen as design variables.The objective function is defined as a linear combina-tion of heat-transfer and friction-loss related terms with the weighting factor.Full-factorial experimental designmethod is used to determine the data points.Optimum shapes of the channel have been obtained in a range of theweighting factor.     

FGTO — A fine structured GTO-thyristor with improved switching characteristics

Contents A fine structured GTO thyristor, abbreviated FGTO, has been developed to improve the switching characteristics. The new device has a cathode finger width of only 20 m and can be turned off without a negative gate bias at an anode current level of more than 200 A/cm². The turn-off time can be shortened down tot _off 500 ns by increasing the negative gate current. A snubber circuit is not necessary to turn off the FGTO's. The maximum rate of rise of anode voltage du/dl reaches more than 10 kV/s. Analytical models are developed to describe the turn-off transients of the FGTO's. Good agreement between the theoretical and experimental results could be achieved.

---

FGTO — Ein feinstrukturierter GTO-Thyristor mit verbessertem Schaltverhalten

Übersicht Zur Verbesserung des Schaltverhaltens ist ein feinstrukturierter GTO-Thyristor, abgekürzt FGTO, entwickelt worden. Dieses neue Bauelement hat eine Kathoden-streifenbreite von nur 20 m und kann ohne negative Gatevorspannung bei einer Anodenstromdichte von mehr als 200 A/cm² abgeschaltet werden. Die Abschaltzeit läßt sich durch Erhöhung des negativen Gatestroms bis zut _off 500 ns verkürzen. Beim Abschalten von FGTOs ist keine RC-Beschaltung erforderlich. Der maximale du/dl-Wert erreicht mehr als 10 kV/s. Zur Beschreibung des Abschalt-verhaltens von FGTOs werden analytische Modelle entwickelt, die eine gute Übereinstimmung mit den Meßergebnissen liefern.

     

Finite difference time-domain analysis of planar microwave circuits

Contents The application of finite difference time domain analysis techniques to planar microwave integrated circuit design is discussed. It is shown that using this technique, three-dimensional discontinuity problems in planar microstrip and coplanar circuits can be analyzed in a full-wave approach.

---

Finite-Differenzen-Analyse von planaren Mikrowellen-schaltungen im Zeitbereich

Übersicht Es wird die Anwendung der Finiten-Differenzen-Analyse elektromagnetischer Felder im Zeitbereich auf den Entwurf integrierter Mikrowellenschaltungen diskutiert. Es wird gezeigt, daß durch Anwendung dieser Technik eine Lösung der Beschreibungsprobleme für dreidimensionale Schaltkreis-Diskontinuitäten in planarer Mikrostreifenleitungstechnik und in koplanarer Leitungstechnik unter Berücksichtigung der vollen Welleneigenschaften gefunden werden kann. Verschiedene Beispiele von Analysen planarer Mikrowellenbauelemente werden diskutiert und die Ergebnisse mit Messungen verglichen.

---

---

Dedicated to Prof. Dr.-Ing. Herbert Döring on the occasion of his 80th birthday     

Tocopherol and tocotrienol compositions of raw table olive fruit

The tocopherol (Tp) and tocotrienol (Tt) compositions of raw Greek olive fruit pericarp were determined by high-performance liquid chromatography. The following four types of fruit collected from three main varieties of olive trees were analysed: ‘Conservolea’ (green), ‘Halkidiki’ (green), ‘Conservolea’ (black) and ‘Calamon’ (black). α-Tp was found to be the predominant Tp in all types. The variety and stage of maturity influenced the Tp and Tt composition. β-Tp and α-Tt were found only in trace quantities in green olives. The same was true for α-Tp in all types and γ-Tp in ‘Conservolea’ (green). The calculated α-Tp equivalents (Tp and Tt compositions expressed as α-Tp according to their relative biological activities) were 21·6, 29·7, 36·8 and 39·4 μg g^?1 pericarp or 138, 132, 189 and 196 μg g^?1 lipid for ‘Conservolea’ (green), ‘Halkidiki’ (green), ‘Conservolea’ (black) and ‘Calamon’ (black), respectively.     

Adaptive Neural Network for Nuclear Medicine Image Restoration

A novel adaptive neural network is proposed for image restoration using a nuclear medicine gamma camera based on the point spread function of measured system. The objective is to restore image degradation due to photon scattering and collimator photon penetration with the gamma camera and allow improved quantitative external measurements of radionuclides in-vivo. The specific clinical model proposed is the imaging of bremsstrahlung radiation using ³²P and ⁹⁰Y because of the enhanced image degradation effects of photon scattering, photon penetration and poor signal/noise ratio in measurements of this type with the gamma camera. This algorithm model avoids the common inverse problem associated with other image restoration filters such as the Wiener filter. The relative performance of the adaptive NN for image restoration is compared to a previously reported order statistic neural network hybrid (OSNNH) filter by these investigators, a traditional Weiner filter and a modified Hopfield neural network using simulated degraded images with different noise levels. Quantitative metrics such as the change of signal to noise ratio (SNR) are used to compare filter performance. The adaptive NN yields comparable results for image restoration with a slightly better performance for the images with higher noise level as often encountered in bremsstrahlung detection with the gamma camera. Experimental attenuation measurements were also performed in a water tank using two radionuclides, ³²P and ⁹⁰Y, typically used for antibody therapy. Similar values for an effective attenuation coefficient was observed for the restored images using the OSNNH filters and adaptive NN which demonstrate that the restoration filters preserves the total counts in the image as required for quantitative in-vivo measurements. The adaptive NN was computationally more efficient by a factor 4–6 compared to the OSNNH filter. The filter architecture, in turn, is also optimum for parallel processing or VLSI implementation as required for planar and particularly for tomographic mode of detection using the gamma camera. The proposed adaptive NN method should also prove to be useful for quantitative imaging of single photon emitters for other nuclear medicine tomographic imaging applications using positron emitters and direct X-ray photon detection.