This paper proposes a computationally efficient methodology for the optimal location and sizing of static and switched shunt capacitors in radial distribution systems. The problem is formulated as the maximization of the savings produced by the reduction in energy losses and the avoided costs due to investment deferral in the expansion of the network. The proposed method selects the nodes to be compensated, as well as the optimal capacitor ratings and their operational characteristics, i.e. fixed or switched. After an appropriate linearization, the optimization problem was formulated as a mixed-integer linear problem, suitable for being solved by means of a widespread commercial package. Results of the proposed optimizing method are compared with another recent methodology reported in the literature using two test cases: a 15-bus and a 33-bus distribution network. For the both cases tested, the proposed methodology delivers better solutions indicated by higher loss savings, which are achieved with lower amounts of capacitive compensation. To calculate the energy savings and the deferral investment cost exactly, a load flow for radial distribution network is executed before and after the compensation. The proposed method has also been applied for compensating to an actual radial distribution network served by AES-Venezuela in the metropolitan area of Caracas. A convergence time of about 4 s after 22,298 iterations demonstrates the ability of the proposed methodology for efficiently handling compensation problems. 相似文献
According to various authors, the surface quality of steel depends on the dynamic conditions that occur within the continuous casting mold’s upper region. The meniscus, found in that upper region, is where the solidification process begins. The liquid steel is distributed into the mold through a submerged entry nozzle (SEN). In this paper, the dynamic behavior inside the SEN is analyzed by means of physical experiments and numerical simulations. The particle imaging velocimetry technique was used to obtain the vector field in different planes and three-dimensional flow patterns inside the SEN volume. Moreover, large eddy simulation was performed, and the turbulence model results were used to understand the nonlinear flow pattern inside the SEN. Using scaled physical and numerical models, quasi-periodic behavior was observed due to the interaction of two three-dimensional vortices that move inside the SEN lower region located between the exit ports of the nozzle. 相似文献
This study aimed to estimate the consumption of meat and products derived from hunting by the consumer population and, specifically, by hunters and their relatives. For this purpose, a survey was conducted on the frequency of consuming meat from the four most representative game species in Spain, two of big game, wild boar (Sus scrofa) and red deer (Cervus elaphus), and two of small game, rabbit (Oryctolagus cuniculus) and red partridge (Alectoris rufa), as well as of processed meat products (salami-type sausage) made from those big game species. The survey was carried out on 337 habitual consumers of these types of products (hunters and their relatives). The total mean game meat consumption, per capita in this population group, is 6.87 kg/person/year of meat and 8.57 kg/person/year if the processed meat products are also considered. Consumption of rabbit, red partridge, red deer and wild boar, individually, was 1.85, 0.82, 2.28 and 1.92 kg/person/year, respectively. It was observed that hunters generally registered a larger intake of game meat, this being statistically significant in the case of rabbit meat consumption. Using probabilistic methods, the meat consumption frequency distributions for each hunting species studied were estimated, as well as the products made from big game species and the total consumption both of meat by itself and that including the products made from it. The consumption frequency distributions were adjusted to exponential ones, verified by the test suitable for it according to Akaike Information Criterion (AIC), Bayesian Information Criterion (BIC), the Chi-squared and Kolmogorov–Smirnov statistics. In addition, the consumption percentiles of the different distributions were obtained. The latter could be a good tool when making nutrition or contaminant studies since they permit the assessment of exposure to the compound in question. 相似文献
This study reports the behavior of the Ni20Cr alloy in molten nitrate salts. Its behavior was evaluated in the eutectic mixture called Solar Salt (binary salt) and in a ternary mixture (90% Solar Salt and 10% lanthanum nitrate). The addition of lanthanum nitrate was performed to determine if the presence of the La3+ cation could act as a corrosion inhibitor. Through mass loss and potentiodynamic polarization studies, the effects of both electrolytes on the corrosion resistance of the alloy at 300, 400, and 500 °C and at exposure times of 250, 500, 750, and 1000 h were determined. The results showed an increase in the corrosivity of the ternary salt, due to a decrease in its melting point and an increase in the concentration of nitrate ions. However, it was observed that the La3+ cations formed a protective layer (La2O3) on the alloy surface. In both corrosive media, the Ni20Cr alloy showed excellent corrosion resistance, due to its ability to form protective layers of Cr2O3, NiO, and NiCr2O4, in addition to the presence of a layer of La2O3 in the case of the ternary salt. 相似文献
This paper is concerned with the modeling of wheels within the framework of finite element-based dynamic analysis of nonlinear, flexible multibody systems. The overall approach to the modeling of wheels is broken into four distinct parts: a purely kinematic part describing the configuration of the wheel and contacting plane, a unilateral contact condition giving rise to a contact force, the friction forces associated with rolling and/or sliding, and a model of the deformations in the wheel tire. The formulation of these various aspects of the problem involves a combination of holonomic and non-holonomic constraints enforced via the Lagrange multiplier technique. This work is developed within the framework of energy-preserving and decaying time integration schemes that provide unconditional stability for nonlinear, flexible multibody systems involving wheels. Strategies for dealing with the transitions from rolling to sliding and vice-versa are discussed and are found to be more efficient than the use of a continuous friction law. Numerical examples are presented that demonstrate the efficiency and accuracy of the proposed approach. 相似文献
In areas that require high performance components, such as the automotive, aeronautics and aerospace industries, optimization of the dynamic behavior of structures is sought through different approaches, such as the design of materials specific to the application, for instance through structural topology optimization. The bi-directional evolutionary structural optimization (BESO) method, in particular, has been used for the simultaneous design of hierarchical structures, which means that the structural domain consists not only of the macrostructure but also of the microstructural topology of the materials employed. The purpose of this work is to apply the BESO method to solve two-dimensional multiscale problems in order to minimize the response of structures subjected to forced vibrations in a given frequency range. The homogenization method is applied to integrate the different scales of the problem. In particular, the material interpolation model for two materials is used. The BESO method is applied to different cases of optimization, in macroscale, microscale, and multiscale structural domains. Numerical examples are presented to validate the optimization and demonstrate the potential of this approach. The numerical examples show that the multiscale bi-material topology optimization method implemented here is able to produce structures and microstructures for optimization of the frequency domain response, satisfying prescribed volume constraints.
Morphoanatomical analysis of seeds contributes to knowledge of the development of seedlings and identification of species, as well as supporting conservation studies. The conservation of the species belonging to the Passiflora genus is crucial due to of the threats to the genetic resources of these species. Thus, the objective of this study was to morphoanatomically characterize Passiflora seeds, verify possible injuries to the tissues after cryopreservation and thus contribute to the conservation strategies of the species of this genus. Initially, seeds of Passiflora coccinea, P. edulis, P. gibertii, P. maliformis, P. morifolia, P. setacea, P. suberosa, and P. tenuifila collected from the Passion Fruit Active Germplasm Bank of the Embrapa Cassava and Fruits research unit (Embrapa Mandioca e Fruticultura) were analyzed. Then, their length, width and thickness, shape of the base and tip, and ornamentations present on the body and edge of the seeds were evaluated. The seeds of the species were placed in cryotubes and immersed in liquid nitrogen to assess possible cryoinjuries. The tegument and tissues of the seeds were examined by scanning electron microscopy. The seeds had varied biometric data, with average values of 4.63 mm for length, 3.28 mm for width, and 1.51 mm for thickness. Six ornamentation types were observed: reticulate for the species P. coccinea; finely reticulate for P. edulis; foveolate reticulate for P. gibertii and P. setacea; alveolate reticulate for P. maliformis and P. tenuifila; coarsely reticulate for P. morifolia; and falsifoveolate reticulate for P. suberosa. Some seeds suffered tegument cracks due to the freezing in liquid nitrogen, but without physiological damages to the embryo and endosperm. The cryopreservation of the seeds in the presence of the tegument significantly reduced the cryoinjuries caused to the embryo. Cryopreservation can be promising for long-term conservation of passion fruit seeds. 相似文献
Video content consumption is currently dominating the mix of traffic observed in Internet service provider (ISP) networks. The distribution of that content is usually performed by means of content delivery network (CDN) caches storing and delivering multimedia. The advent of virtualization is calling attention to the CDN providers as a use case for virtualizing the cache function. In parallel, there is a trend for sharing network infrastructures as a way of reducing deployment costs by ISPs. Then, an interesting scenario emerges when considering the possibility of sharing virtualized cache functions among ISPs which are sharing a common physical infrastructure, mostly considering that those ISPs offer similar video content catalogs to end users. Furthermore, when deciding to share the caches among ISPs, it is interesting to understand the impacts due to limiting the storage capacity at the edge sites. This paper investigates through simulations the potential efficiencies that can be achieved when sharing a virtual cache function if compared with the classical approach of independent virtual caches operated per ISP, as well as the implications of limiting the storage capacity of the caches at the edge. 相似文献
Undoubtedly, Industry 4.0 in the energy sector improves the conditions for automation, generation and distribution of energy, increasing the rate of electric vehicle manufacturing in recent years. As a result, more grid-connected charging infrastructures are being installed, whose charging stations (CSs) can follow standardized architectures, such as the one proposed by the open charge point protocol (OCPP). The most recent version of this protocol is v.2.0.1, which includes new security measures at device and communication level to cover those security issues identified in previous versions. Therefore, this paper analyzes OCPP-v2.0.1 to determine whether the new functions may still be susceptible to specific cyber and physical threats, and especially when CSs may be connected to microgrids. To formalize the study, we first adapted the well-known threat analysis methodology, STRIDE, to identify and classify threats in terms of control and energy, and subsequently we combine it with DREAD for risk assessment. The analyses indicate that, although OCPP-v2.0.1 has evolved, potential security risks still remain, requiring greater protection in the future.