A comprehensive approach to the solution of direct-coupledmultislice model of skewed rotor induction motors using time-steppingeddy-current finite element method

Normally a complicated three-dimensional (3-D) approach is needed to study the field pattern of induction machines with skewed rotor bars. In this paper, a time-stepping two-dimensional (2-D) eddy-current finite element method, based on multislice technique, is described to study the steady-state operation and the starting process of skewed rotor induction machines. The fields of the multislices are being solved en bloc simultaneously, and thus, the effects of the eddy current and saturation can be taken into account directly. New forms of the governing equations for the multislice model are derived, which allow the meshes of multislices to be taken as one 2-D mesh so that the algorithm is very similar to that of general 2-D problems. Special techniques required for the mesh generation in the multislice model and the salient structures of the software are also described. The results obtained by using the program being developed have very good correlation with test data     

乙烯基三甲基硅烷等离子体聚合反应历程

应用色谱—质谱(GC-MS)及裂解色谱-质谱(PGC-MS)测定了乙烯基三甲基硅烷等离子体聚合反应中的气体冷凝物及聚合物,研究推导了等离子体聚合反应历程。单体在气相中被电子撞击,然后扩散到基底,在基底发生链增长和链终止反应。     

FEATURE SOLID MODELING TOOL SYSTEM:FSMTS

In conformity with the principle of Design for Manufacture,feature-based design strate-(?)es have been developed.As the“feature”is relevant to the“macro process plan”and“macro NCprograms”,obviously,“feature”is beyond the power of conventional solid modellers.Neverthe-less,substantial breakthrough has not been made in the solid modeling field,except“feature at-taching”or“feature recognizing”methods have been taken on.In this paper,the theory,concepts,system architecture,and algorithm principles of solid modeling tool system have beenrepresented.The practice of Feature Solid Modeling Tool System (FSMTS) developed atHuazhong University has proved that the tool may be a new foundation of Feature-Based Design.     

Design aspects of planar and conventional SMPS transformer: a cost benefit analysis

The intent of this paper is to design a high-frequency transformer that is to be incorporated into the DC/DC pulsewidth-modulated switch-mode power supplies by two different technical approaches: a conventional wound-coil magnetic using copper wires, and a planar magnetic with layered copper tracks on laminated printed circuit board. Comparisons will be made between the two approaches in terms of profile: mounting height and surface area, and performance: power losses and efficiency. Other indicators like temperature rise and leakage inductance that causes electromagnetic interference, and cost, materials, and process fluency are also to be looked into. A sandwiched configuration for primary and secondary windings is proposed for the planar type. Issues arising and typical phenomena encountered will be discussed in detail. Primarily, the dominating factor in performance, cost effectiveness, or circuit compactness that restrains the choice of a particular type is to be evaluated.     

叠后地震剖面的线性化波阻抗反演

本文提出了由井旁道出发逐道进行的叠后地震剖面的线性化波阻抗反演方法。每一道反演采用逐次线性化对波阻抗进行修正，反演的纵向分辨率为一个采样时间间隔，并以合成记录道与实际地震道的相似系数作为迭代收敛准则，已处理的地震道波阻抗作为下一道反演初始值。实际资料处理表明，该方法具有较高的分辨率和运算速度快的优点。     

Measurement-based network monitoring and inference: scalability andmissing information

Using measurements collected at network monitors to infer network conditions is a promising approach for network-centric monitoring. In this context, an important question arises: given the number and locations of network monitors, how much network management resources (e.g., the number of measurements) are needed to obtain an accurate estimate of network states? We define the scalability of measurement-based network monitoring as the growth rate of the number of measurements required for accurate network monitoring/inference with respect to the size of a network. We develop a framework for investigating the scalability in the context of multicast inference with the monitors at the edges of a network. In such a framework, network monitoring/inference can be formulated as probability density estimation of network states. The growth rate is characterized through the sample complexity, which is the number of measurements needed to accurately estimate the density. The missing data framework is introduced to estimate the growth rate, where the missing data reflect unavailable measurements at the unobservable nodes without resident monitors, and the underlying nodal packet losses. We show that when the missing information is mainly due to the number of unobservable nodes, the number of measurements needed grows linearly with the size of the network, and the measurement-based inference approach is, thus, scalable. When the missing information is mainly due to the underlying nodal packet losses, the number of measurements needed grows faster than linear with the size of the network, and the measurement-based inference approach is, thus, not scalable. Our results provide guidelines for accessing feasibility of the measurement-based inference approach, and the number of probes required. We give numerical examples to illustrate some of our results     

带疏水泵加热器出口主凝结水焓的计算方法

以火电厂热力系统热力单元矩阵分析法为基础，提出了一种更为科学有效的带疏水泵加热器出口主凝结水焓分析计算的新方法，应用表明，其结论与常规算法完全一致，图2表1参3。     

墙改之路越走越宽标准严格政策绿灯

四部委发布实施<节能标准>的通知 日前,建设部、国家计委、国家经贸委、财政部联合发布了关于实施<夏热冬冷地区居住建筑节能设计标准>的通知.     

拉伸速率对PP/GB复合材料力学性能的影响

应用Instron材料试验机考察了室温下拉伸速率对玻璃微珠填充聚丙烯复合材料的弹性模量和屈服强度的影响，结果表明，随着微珠含量的增加，试样的弹性模量（Ec）增大，且与拉伸应变速率呈近乎幂律函数关系，而屈服强度（бyc）则随着微珠体积分数（Φf）的增加呈线性函数形式下降，并随着拉伸应变速率的增加呈幂律函数形式提高，此外，讨论了Ec、Φf与бyc三者之间的关系。