A Two-Dimensional Numerical Analysis for Thermal Performance of an Intermittently Operated Radiant Floor Heating System in a Transient External Climatic Condition

Abstract

Building thermal inertia and operation control strategies have impacted on the thermal performance of a radiant floor heating system. This study conducts a two-dimensional numerical analysis of an intermittently operated radiant floor heating system using the Re-Normalization Group model with Discrete Ordinates Radiation model. A detailed numerical simulation setups and various analyses are provided, including grid independency analysis, initial condition, time step sizes and external boundary conditions. Three different weekend day intermittent operation strategies are investigated. The results showed that Case 3 designed with pre-heating of 20?h has better performance compared to Case 1 designed with pre-heating of 8?h and Case 2 designed with pre-heating of 14?h. The average indoor air temperature differences of approximate 2.1, 1.6 and 1.2 K are observed for Case 1, Case 2 and Case 3, respectively, when comparing two-time slot at 8:00am on Friday morning and Monday morning. This significantly highlights the effect of thermal inertia and the potential of energy saving due to the utilization of intermittent operation. Therefore, the current study presents numerical simulation potential in evaluating the radiant floor heating effects on indoor thermal environment, taking into account building thermal inertia and transient external climatic conditions.     

The effect of FAR (floor area ratio) regulations on land values: The case of New York

This paper explores the stringency of floor area ratio (FAR), one of the land use regulations in New York, and analyses it by boroughs of New York. Stringency is presented when the regulated height is significantly lower than the free market height and the theoretical approach shows that the elasticity of the land value with respect to FAR is used to estimate the stringency. In particular, we overcome issues in previous studies by constructing a data set using publically available data through new methods. The results show that the FAR stringency in Manhattan is the highest in New York City and the stringency is lower as the distance from the centre of the city increases.     

Thermal Transport in Disordered Materials

ABSTRACT

We review the status of research on thermal/phonon transport in disordered materials. The term disordered materials is used here to encompass both structural and compositional disorder. It includes structural deviations ranging from an ideal crystal with disordered arrangements of defects all the way to fully amorphous materials, as well as crystals with impurities up through multi-component random alloys. Both types of disorder affect phonons by breaking the symmetry of an idealized crystal and changing their character/mode shapes. These effects have important implications with regard to phonon–phonon interactions, phonon transport and phonon interactions with other quantum particles, which are being actively investigated. Herein, we synthesize the current theoretical understanding, identify the aspects of the problem that require more work, and pose open questions. Abbreviations: BTE: Boltzmann transport equation; DFT: Density functional theory; EPP: Eigenvector periodicity parameter; FAFDTR: Fiber-aligned frequency domain thermoreflectance; GK: Green–Kubo; GKMA: Green–Kubo modal analysis; HCACF: Heat current autocorrelation function; IXS: Inelastic X-ray scattering; LD: Lattice dynamics; LJ: Lennard–Jones; MD: Molecular dynamics; MFP: Mean free path; NEMD: Non-equilibrium molecular dynamics; NMD: Normal-mode dynamics; PDL: Propagon, diffuson, locon; PGM: Phonon gas model; PR: Participation ratio; SCLD: Supercell lattice dynamics; SED: Spectral energy density; TDTR: Time-domain thermoreflectance; VCA: Virtual crystal approximation;     

Combined Application of Antibrowning,Heat Treatment and Modified‐Atmosphere Packaging to Extend the Shelf Life of Fresh‐Cut Lotus Root

This work aimed to determine the effects of different concentrations of antibrowning treatments (that is, distilled water [DW], 1% ascorbic acid [AA], 0.5% chamomile [CM], and 1% AA + 0.5% CM) and heat‐treatment (55 °C for 45 s) combined with packaging under 4 different modified‐atmosphere gas compositions (that is, air, vacuum, 100% CO₂, 50% CO₂/50% N₂) on the quality and microbiological characteristics of fresh‐cut lotus root. The quality characteristics (that is, color, weight loss, texture, pH, polyphenoloxidase activity, and total phenolic content) of the AA + CM‐dipped sample in 100% CO₂ packaging were maintained significantly better than those of the other samples (P < 0.05). The microbiological counts observed in the DW‐dipped sample during storage were higher than those of the AA, CM, and AA + CM samples, and heat‐treatment retarded the microbiological deterioration of fresh‐cut lotus root. Therefore, the results revealed that dipping in an antibrowning treatment (AA + CM), and 100% CO₂ MAP with heat treatment effectively extend the shelf life of fresh‐cut lotus root to 21 d at 5 °C.     

Bio-information scanning technology using an optical pick-up head

We have developed a low cost and a highly compact bio-chip detection technology by modifying a commercially available optical pick-up head for CD/DVD. The highly parallel and miniaturized hybridization assays are addressed by the fluorescence emitted by the DNA-chip using the optical pick-up head. The gap between the objective lens and the bio-chip is regulated by the focus servo during the detection of the fluorescence signal. High-resolution and high-speed scanning is effectively realized by this simple scanning system instead of utilizing high-precision mechanism. Regardless of achievement of effective detection mechanism, the technique of fluorescence detection can prove to be disadvantageous because of the low stability of the dyes with low S/N ratio and an expensive setup such as a PMT detector is always required for fluorescence detection. We propose, for the first time, a novel scanning scheme based on metal nanoparticles in combination with a bio-chip substrate having a phase change recording layer. We found that the phase change process is highly affected by the existence of the densely condensed metal nanoparticles on the phase change layer during the writing process of the pick-up head.     

Lift-off patterning of thin Au films on Si surfaces with atomic force microscopy

We studied a new lift-off process of thin Au film on silicon surfaces in nanometer-scale, combining anodic oxidation patterning with AFM, deposition of Au thin film on the patterned substrate and chemical etching processes of the Si oxide underneath the Au film. For Au films of thickness of 2-5 nm, the Au films on the Si oxide patterns were left unbroken and bent down to stick to Si surface after the removal of the oxide by the chemical etching. For an Au film of 1 nm in thickness, it was possible to lift-off the Au film on oxide patterns of the lines and dots in nanometer-scale using Si oxide as a sacrificial mask.     

Development of the active balancing device for high-speed spindle system using influence coefficients

A high-speed spindle can be very sensitive to rotating mass unbalance which has harmful effect on many types of rotating machinery. Therefore, the balancing procedure is certainly needed to reduce vibration in all high-speed rotating systems. In this study, an active balancing program using influence coefficient method and an active balancing device of an electro-magnetic type with both simple and reliable structures were applied to the developed high-speed spindle system. A gain scheduling control using influence coefficients of the reference model was proved to be effective in balancing the spindle system although its characteristics were changed. The stability of reference influence coefficients was verified by experiments with frequency response functions. The active balancing experiment of the manufactured spindle system using an active balancing program and device was also performed efficiently during the operation. As a result, controlled unbalance responses after balancing work were below the vibration limit at all rotating speed ranges including critical speeds.