高温预析出对Al-Zn-Mg-Cu铝合金显微组织、强度和应力腐蚀抗力的影响

通过改变固溶条件 ,对Al Zn Mg Cu高强铝合金采用先高温后低温的两步固溶处理 (高温预析出 )来改善晶内和晶界的析出状态 ,研究了高温预析出对Al Zn Mg Cu铝合金的金相组织、强度和应力腐蚀性能的影响。结果表明 ,4 6 5℃高温预析出在保持较高强度和塑性的同时 ,可以改善合金的抗应力腐蚀性能     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

真空水冷铜坩埚感应炉模糊控制专家系统的研究

研究真空水冷铜坩埚感应炉中模糊控制专家系统。阐述该炉控制系统复杂性 ,介绍模糊控制专家系统的主要结构和各主要部分的功能和一些算法     

粘土砂旧砂再生效果与其含水量的关系

在影响粘土砂旧砂再生效果的诸多因素中,旧砂中水分含量是最重要的因素。本文就水分含量对再生效果的影响规律、再生效果最佳的水分含量等进行了研究和分析,得出了如下结论:并非含水量越低再生效果就越好,而是存在一个去泥率低谷区;再生效果最佳的适宜水分含量为1～2%。     

焊接企业生产管理系统

通过对焊接企业的分析和总结,以 Oracle 为数据平台,运用面向对象的插件开发技术,设计、开发了焊接企业生产管理系统,以便对企业焊接生产线上所有物质、流程进行更精准的监控、管理,如对焊材、母材的管理等。同时,该系统集成了各种焊材的国家检验标准数据,并支持按企业特性进行修改,为质检人员制定标准提供便捷。     

基于冗余链路的校园网流量管理设计与实现

分析了目前校园网用户体验宽带不宽的主要因素,针对校园网出口冗余链路提出基于时间策略的负载均衡方案,并对校园网骨干架构做出相应调整,经过实际应用测试,保障了用户办公学习网络应用带宽,提高了校园网用户满意度。     

Statistically uniform intra-block refresh algorithm for very low delay video communication

This paper focuses on the mechanism underlying the overall delay of a real-time video communication system from the time of capture at the encoder to the time of display at the decoder. A detailed analysis is presented to illustrate the delay problem. We then describe a statistically uniform intra-block refresh scheme for very low delay video communication. By scattering intra-blocks uniformly into continuous frames, the overall delay is significantly decreased, and object changes in the scene could be presented to the end user instantly. For comparison, the overall delay and the peak signal-to-noise ratio (PSNR) performance are tested. The experiment results show that an average of approximately 0.1 dB PSNR gain on average is obtained relative to random intra-macroblock refresh algorithm in H.264 JM, and the end-to-end delay performance is significantly improved.     

DVB-S2系统中LDPC码的编码算法的研究

本文介绍了DVB-S2标准中所采用的IRA LDPC码的结构,在研究其结构的基础上分析了直接型IRA码编码技术以及串行Turbo码编码技术.采用对比特节点所对应的所有校验节点进行并行编码运算的硬件实现方法,大大提高了编码器的工作速率.