近十年常温干法精脱硫专利技术发展动态

收集了近十年来国内的常温干法精脱硫专利，并分类列举出各种脱硫剂的物化性质和几种常温精脱硫工艺，重点阐述了该技术的优缺点及其未来发展方向。     

氧化铝上吸附平衡与动力学的分形特性

在实验测定氧化铝吸附氮气的平衡和动力学过程的基础上 ,由平衡数据得到分形维数 ,对动力学结果分别用欧氏几何和分形几何的动力学模型进行处理 ,比较两种方法得到的扩散系数之间的差别。结果表明 :粉状氧化铝的分形维数为 2 .12 ;采用分形动力学模型得到的扩散系数同欧氏几何扩散模型的结果不一样 ,扩散系数不随浓度的变化而改变 ;而欧氏几何扩散模型中的扩散系数随浓度变化发生改变 ,且变化符合Darken关系     

Dynamic output feedback control of a flexible air-breathing hypersonic vehicle via T–S fuzzy approach

By utilising Takagi–Sugeno (T–S) fuzzy set approach, this paper addresses the robust H_∞ dynamic output feedback control for the non-linear longitudinal model of flexible air-breathing hypersonic vehicles (FAHVs). The flight control of FAHVs is highly challenging due to the unique dynamic characteristics, and the intricate couplings between the engine and fight dynamics and external disturbance. Because of the dynamics’ enormous complexity, currently, only the longitudinal dynamics models of FAHVs have been used for controller design. In this work, T–S fuzzy modelling technique is utilised to approach the non-linear dynamics of FAHVs, then a fuzzy model is developed for the output tracking problem of FAHVs. The fuzzy model contains parameter uncertainties and disturbance, which can approach the non-linear dynamics of FAHVs more exactly. The flexible models of FAHVs are difficult to measure because of the complex dynamics and the strong couplings, thus a full-order dynamic output feedback controller is designed for the fuzzy model. A robust H_∞ controller is designed for the obtained closed-loop system. By utilising the Lyapunov functional approach, sufficient solvability conditions for such controllers are established in terms of linear matrix inequalities. Finally, the effectiveness of the proposed T–S fuzzy dynamic output feedback control method is demonstrated by numerical simulations.     

An alignment-free fingerprint bio-cryptosystem based on modified Voronoi neighbor structures

Bio-cryptography is an emerging security technology which combines cryptography with biometrics. A good bio-cryptosystem is required to protect the privacy of the relevant biometric data as well as achieving high recognition accuracy. Fingerprints have been widely used in bio-cryptosystem design. However, fingerprint uncertainty caused by distortion and rotation during the image capturing process makes it difficult to achieve a high recognition rate in most bio-cryptographic systems. Moreover, most existing bio-cryptosystems rely on the accurate detection of singular points for fingerprint image pre-alignment, which is very hard to achieve, and the image rotation transformation during the alignment process can cause significant singular point deviation and minutiae changes. In this paper, by taking full advantage of local Voronoi neighbor structures (VNSs), e.g. local structural stability and distortion insensitivity, we propose an alignment-free bio-cryptosystem based on fixed-length bit-string representations extracted from modified VNSs, which are rotation- and translation-invariant and distortion robust. The proposed alignment-free bio-cryptosystem is able to provide strong security while achieving good recognition performance. Experimental results in comparison with most existing alignment-free bio-cryptosystems using the publicly-available databases show the validity of the proposed scheme.     

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Ti₃SiC₂ is of interest due to its unique dual nature reminiscent of both brittle ceramics and ductile metals at ambient conditions. In this work, plate-impact experiments have been performed to study the dynamic behavior of Ti₃SiC₂ under shock compression up to 112 GPa by using laser velocity interferometer and electric pin techniques. Hugoniot elastic limits (HEL), spall strength, and Hugoniot equations of state have been obtained based on measured particle velocity profiles and shock wave velocities. The ratio of spall strength to HEL for Ti₃SiC₂ is larger than brittle ceramics but smaller than metals. This result indicates that the dual nature of Ti₃SiC₂ remains at least up to 10 GPa. On the other hand, the linearity of the Hugoniot equation of state, $D=6.9\text{0}1(22)+1.153(53)u_{\text{p}}$, suggests that the initial structure of Ti₃SiC₂ should be stable up to 112 GPa, in contrast to the result reported by Jordan et al. [J. Appl. Phys., 93 (2003) 9639].     

对煤磨MDC89-7袋式除尘器的节能环保改造

0 前言 湖南韶峰水泥集团有限公司规格为φ2.5 m×3.9 m的风扫式煤磨配套的MDC89-7袋式除尘器于1993年投用,经十多年的生产应用,其导流板及风道损坏达80%左右;外壳、主风道因烧袋和腐蚀,严重变形且花板变得很薄;反吹风道变形穿孔,提升阀密封不严,导致清灰时风量流失严重,运行阻力增加,系统产量降低,且系统中含氧量增加,带来安全隐患;除尘效率下降、污染严重,粉尘排放浓度高达1 g/m3;系统能耗高,且维修强度大(每个滤袋重50kg,每次换袋需12人)且费用高.为此,该公司于2004年4月对该煤磨除尘器进行技术改造,取得了明显的效果.     

浅谈C语言中循环结构的教学--回答好循环结构的“三个问题”

循环结构是C语言程序设计中的重难点,其掌握情况对于后续章节的学习效果尤为关键。本文以什么是循环、何时需要使用循环以及如何使用循环三个问题为主线,通过精心选择的教学案例和灵活有效的教学方法来进行解答,以激发学生兴趣,培养编程思想。     

尿基复合肥生产技术的改进

通过分析尿基复合肥生产过程中出现的问题，并相应提出技术改进措施，优化操作，对复合肥产量的提高和产品质量的控制都取得了明显的效果。     

PP/纳米级CaCO_3复合材料的研究

研究了纳米级CaCO3填充粒状、粉状PP复合材料的力学性能,并用SEM观察纳米级碳酸钙在PP中的分散状态及用SALS分析了其结晶行为。结果表明,粉状PP更有利于纳米级碳酸钙在PP中的分散,并具有更好的加工性能、力学性能。同时纳米级碳酸钙改性PP的SALS图像变得弥散、模糊,PP球晶变得不完善,晶粒更小。     

Shape‐memory polyurethane/multiwalled carbon nanotube fibers

Shape‐memory polyurethane/multiwalled carbon nanotube (SMP–MWNT) composites with various multiwalled carbon nanotube (MWNT) contents were synthesized, and the corresponding SMP–MWNT fibers were prepared by melt spinning. The influence of the MWNT content on the spinnability, fracture morphology, thermal and mechanical properties, and shape‐memory behavior of the shape‐memory polymer was studied. The spinning ability of SMP–MWNTs decreased significantly with increasing MWNT content. When the MWNT content reached 8.0 wt %, the fibers could not be produced because of the poor rheological properties of the composites. The melt‐blending, extrusion, and melt‐spinning processes for the shape‐memory fiber (SMF), particularly at low MWNT contents, caused the nanotubes to distribute homogeneously and preferentially align along the drawing direction of the SMF. The crystallization in the SMF was promoted at low MWNT contents because it acted as a nucleation agent. At high MWNT contents, however, the crystallization was hindered because the movement of the polyurethane chains was restricted. The homogeneously distributed and aligned MWNTs preserved the SMF with high tenacity and initial modulus. The recovery ratio and recovery force were also improved because the MWNTs helped to store the internal elastic energy during stretching and fixing. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007