氧和氮在炭分子筛上的吸附与扩散

用重量法研究了氧、氮在两种空分用炭分子筛上的吸附与扩散。结果表明,氧和氮在炭分子筛中的扩散是活化扩散,该过程可用双孔模型进行描述。求得了氧、氮的扩散系数。     

Electrosyntheses and characterization of poly(5‐bromoindole) in boron trifluoride diethyl etherate

Poly(5‐bromoindole) (PBrI) films were synthesized electrochemically by direct oxidation of 5‐bromoindole in pure boron trifluoride diethyl etherate. The oxidation potential of 5‐bromoindole in this medium was measured to be only 0.97 V vs. saturated calomel electrode, which was lower than that determined in acetonitrile + 0.1 mol L^?1 Bu₄NBF₄ (1.08 V). PBrI films obtained from this medium showed good electrochemical behavior and good thermal stability. Structural studies showed that the polymerization of 5‐bromoindole ring occurred at 2,3 position. As‐formed PBrI films were thoroughly soluble in strong polar solvent dimethylsulfoxide and partly soluble in tetrahydrofuran. Fluorescent spectral studies indicated that PBrI was a good blue‐light emitter. The excitation and emission spectra of PBrI showed a significant shift to longer wavelength compared with that of the monomer, consistent with the greater extent of electron delocalization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 539–547, 2006     

尿素醇解法合成氨基甲酸乙酯的研究

对尿素醇解法合成氨基甲酸乙酯工艺进行了系统地研究,全面考察了反应温度、原料配比、反应时间及搅拌速度等因素对反应性能的影响。研究发现在反应温度为140℃,乙醇与尿素的摩尔比为4∶1,反应3.5 h,氨基甲酸乙酯最高收率为79.2%。     

Structure, thermal-stability and reducibility of Si-doped Ce–Zr–O solid solution

The Si-doped Ce–Zr–O solid solutions have been prepared by the reverse microemulsion method. The effects of Si and its content on the structure characters, thermal-stability and reducibility of the Ce–Zr–O solid solution have been studied by N₂ adsorption, XRD, laser Raman (LR), TPR, FT-IR, NMR and XPS methods. The results indicate that, there are the bonds of Si–O–M (Ce or Zr) in the Ce–Zr–Si–O solid solutions, and the presence of Si can increase obviously the surface area, thermal-stability, crystal lattice distortion rate, and reducibility of the solid solution. The surface area of the sample with 20 wt.% Si reaches 153 m² g⁻¹ after being calcined at 900 °C for 6 h. The Ce–Zr–O solid solution with 5.2–10 wt.% Si shows excellent thermal-stability and reducibility.     

相位测量定位法在焦炉车辆上的应用与研究

文中通过测量载波相位进行定位的方法来解决焦炉车辆的定位问题，以达到无线定位的目的。并对定位的数学模型进行了详细的分析与论述。     

6m大容积焦炉烘炉实践与体会

介绍了 6 m大容积焦炉由冷态到转入正常加热温度的烘炉操作过程中 ,按照一定的升温曲线 ,通过对焦炉热工和炉体膨胀的科学管理 ,确保新建焦炉顺利由冷态过渡到生产状态。     

基于容器的Web运行环境轻量级虚拟化方法

Web运行环境、Web服务及Web应用的虚拟化是减轻Web操作系统安全风险的一种有效方法,然而Web运行环境的虚拟化仍然存在不少挑战,如：执行时间、资源负载和兼容性等。为解决Web操作系统在安全性、执行时间、资源负载和兼容性方面的问题,提出了一种Web运行环境轻量级虚拟化方法,采用Docker容器技术实现进程级别的隔离。本虚拟化方法可在一个基本内核上支持运行多种Web运行环境的容器。此外,为了减轻容器创建负载,提出了容器启动机制;为减轻系统资源负载,进行了系统的轻量化处理。在嵌入式设备的实验结果表明,该虚拟化方法在执行时间、资源负载及兼容性方面都具有较优表现。     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003     

苯胺技术及市场分析

概述了苯胺产品硝化工艺、还原工艺及催化剂;对国内外苯胺装置技术有消耗进行了比较;阐述了国内外苯胺生产及消费;对吉化苯胺装置优势作了重点论述。     

规整填料塔精馏的Marangoni效应

选用 6种代表性物系对陶瓷板波纹和不锈钢丝网规整填料进行全回流精馏实验 ,考察Marangoni效应对规整填料液体流动分布及传质的影响 .结果表明 :对纯有机体系 ,Marangoni效应影响较小 ;而对有机物的水溶液 ,Marangoni效应严重影响着填料的润湿和传质效率