剖析半悬挂减速机故障的产生与对策

介绍了半悬挂减速机的工作原理，分析其故障原因，实施相应的解决对策。     

VHF-PECVD制备微晶硅材料的均匀性及其结构特性的分析

采用VHF-PECVD技术在多功能系统(cluster tool)中制备了系列硅薄膜，研究薄膜的均匀性及电学特性和结构特性。结果表明：气压和功率的合理匹配对薄膜的均匀性有很大的影响；材料的喇曼测试和电学测试结果表明微晶硅薄膜存在着纵向的结构不均匀，在将材料应用于器件上时，必须要考虑优化合适的工艺条件；硅烷浓度大，相应制备薄膜的晶化程度减弱，即薄膜中非晶成分增多。     

灯泡贯流泵装置的基本流态分析

为了回答灯泡贯流泵装置中的灯泡体究竟应该前置还是应该后置的问题,应用水泵装置三维湍流数值模拟的方法分别研究了南水北调东线工程某泵站前置灯泡和后置灯泡贯流泵装置两个不同方案的流态,揭示了前置灯泡和后置灯泡贯流泵装置的基本流动属性;数值模拟的结果得到流道模型试验的验证。研究结果表明:前置灯泡贯流泵装置的进、出水流态均匀平顺,水力损失较小;后置灯泡贯流泵装置的进水流态均匀平顺,但出水流道内存在明显的偏流和旋涡流动,水力损失较大;灯泡体前置符合水力学的基本原理,是获得最佳灯泡贯流泵装置水力性能的必要条件之一。     

三嗪类化合物的合成及其产酸性能研究

合成了一系列的三嗪类光生酸剂1a-1e，确定了它们的结构，并对1e在乙腈溶剂中365和405nm光下的曝光分解产酸性能进行了初步的定量研究．结果表明，在测定浓度范围内分解量子产率和产酸量子产率基本上都不随浓度的变化而变化，在405nm光下比在365nm光下有更高的分解和产酸量子效率．有关这类化合物的光生酸性能与曝光波长的关系正在进一步研究中．     

医患和谐与建筑设计

我们经常会发现，同样一位医护人员在医院工作场所和在其它地方会表现出不同的性格特质，无论是多么和善的人，到了那种医院环境有时就表现得面目可憎。其实，倒不是个人特质有所改变，而是医疗机构流程的流水线和环境造成的，恶劣的医患关系也因此而愈发不可调和。     

Characterizing the deformation behavior of Tertiary sandstones

Tertiary sandstones possess deformational behavior different from hard rocks, especially the relatively larger amount of volumetric dilation during shearing. Such excess dilation contributes to the increase of crown settlement during tunnel excavation and accounts for several cases of tunnel squeezing within Tertiary sandstones. Therefore, the deformation behavior of Tertiary sandstones sampled from more than 13 formations was studied. To distinguish the volumetric deformation induced by hydrostatic stress or by shear stress as well as to decompose the elastic and the plastic components of strains, special experimental techniques, including pure shear tests and cycles of loading–unloading were applied.The experimental results reveal that the deformation of Tertiary sandstone exhibits the following characteristics: (1) significant amount of shear dilation, especially elastic shear dilation; (2) non-linear elastic and plastic deformation; (3) plastic deformation occurs prior to the failure state. Furthermore, features of plastic deformation were inferred from experimental results and, as a result, the geometry of plastic potential surface and the hardening rule were accordingly determined. A constitutive model, involving nonlinear elastic/plastic deformation and volumetric deformation induced by shear stress, is proposed. This proposed model simulates the deformational behavior for the shear-dilation-typed rocks reasonably well. Furthermore, tests on the versatility of the proposed model, including varying hydrostatic stress and stress paths, indicate that the proposed model is capable of predicting deformational behavior for various conditions.     

HotSpot: a compact thermal modeling methodology for early-stage VLSI design

This paper presents HotSpot-a modeling methodology for developing compact thermal models based on the popular stacked-layer packaging scheme in modern very large-scale integration systems. In addition to modeling silicon and packaging layers, HotSpot includes a high-level on-chip interconnect self-heating power and thermal model such that the thermal impacts on interconnects can also be considered during early design stages. The HotSpot compact thermal modeling approach is especially well suited for preregister transfer level (RTL) and presynthesis thermal analysis and is able to provide detailed static and transient temperature information across the die and the package, as it is also computationally efficient.     

马尔可夫链在产品可靠性预测中的应用

事物未来的状态仅仅受事物现状的影响，而与过去的状态无关，也就是具有马尔可夫性。用马尔可夫链的理论与方法，对具有马尔可夫性产品的可靠性进行预测，既为产品的可靠性设计和产品售后服务的经济性分析提供了参考，也为马尔可夫模型的实际应用拓广了范围。通过实例说明在数学软件的帮助下这种预测方法的简单可行性。     

精铸件结构优化设计实践

以6种典型的精密铸件为例，利用“6个千方百计”原则对产品结构进行优化设计，同时辅助有限元分析对优化结果进行再验证。通过减少大平面、避免深长孔、采用加强筋等优化措施，有效地避免了夹砂、鼓包、跑火、缩孔、裂纹等铸造缺陷，实现了少无切削和减轻铸件质量。