活性炭共吸附现象对有机蒸气穿透容量的影响

在空气避有机蒸气的气相色谱分析方法研究中，为获得可靠的采样效果，探讨了活性炭对共存有机蒸气的共吸附与穿透容量的关系，试验了四种有机蒸气共存时和组分的有采样效率。结果表明，共吸附使所有共存有机蒸气的穿透容量下降，共吸附物质愈多，穿透窝量下降愈严重。对二种和四种有机蒸气的共吸附，使丙酮的穿透容量下降２１．９％和４１．７％，四组分共存时，丙酮，丁酮，环已酮、甲苯的穿透窝量分别为５．６、５．０、９．７、１     

衍射图像的信号采集和数据处理

针对衍射图像边缘弥散状态不易切准的问题，运用光电积分的方法确定采集点，然后将二值化的数据通过计算机采用最小二乘法进行计算，从而保证了测量结果的正确性     

自动化专业的学科属性及主干课程设置探讨

本文对自动化专业的学科属性、主干课程设置、教学改革建议等进行了讨论，提出了加强数学和工程背景基础，以适应未来社会需求等建议，对教师素质的提高也进行了探讨。     

埋地式变压器在城市配网供电工程中的应用

随着城市的规划发展和城市电网改造的深入,安全、可靠与用电空间小的变、配电设备正得到越来越多的关注,地埋式变压器系列产品的出现适应了架空设备入地这一趋势,逐渐成为城网配线改造的一个新方向。它不仅节约了投资,而且能够美化城市环境。论述了埋地式变压器的基本技术及应用情况,比较了与常规配电设备的优缺点,提出今后在城市供电工程中埋地式变压器应做的改进。     

A reconfigurable FACTS system for university laboratories

To fully understand the dynamic performance of the multiple flexible ac transmission systems (FACTS) devices, a hardware setup is needed to complement software simulation for university research laboratories. This paper presents the schematic and basic controls of a reconfigurable FACTS system that can be used to realize the major voltage-sourced-converter FACTS topologies: the StatCom, the static synchronous series compensator (SSSC), and the unified power-flow controller (UPFC). Furthermore, the state models and control algorithms for the FACTS devices are proposed. The digital signal processor (DSP)-based control system enables new control methods to be rapidly implemented. The comparison of the experimental and simulation results is also provided to verify the proposed controls. The paper culminates in a list of suggested experiments appropriate for an elective/graduate course in electric power systems.     

Structure, Phonon Vibration, and Spin Correlation of LaBa2Cu3−x Co x O y

Polycrystalline samples LaBa₂Cu_3?xCo _x O _y (0 ≤ x ≤ 1.0) were synthesized by solid state reaction method. The structure, phonon vibration, conduction, and spin correlation were investigated by means of X-ray diffraction, infrared spectra, resistivity, and electron spin resonance. It is found that there are orthorhombic–tetragonal and tetragonal–orthorhombic structural transitions with Co doping, and the conduction behavior changes from metallic to semiconducting. With the increase of Co content, the Cu(1)—O(1) phonon mode around 531 cm^?1 softens, the Cu(2)—O(2) phonon mode around 657 cm^?1 hardens, and the Cu(1)—O(4) mode around 583 cm^?1 is nearly unchanged. The Cu²⁺ spins tend to localize with Co doping. The changes in structure, phonon vibration, and spin correlation with Co doping are analyzed and discussed.     

Properties of Magnetic Nanoparticles about Doped Rare Earth and Its Composites

The magnetic liquid was prepared with ferric salt by inorganic gel technology. The effect of the doped rare earth elements on the properties of magnetic particles was analyzed. The magnetic liquid was composed with clay mineral into magnetic mineral composites. The crystal structure and micro-morphology of the nanoparticles were studied by XRD and TEM. The results show that the crystal structure of the magnetic particles doped 0.5 % of lanthanum is more complete, and the magnetic response capability is higher with doping agent. At the same time, the possibility of the clay mineral magnetic composites as the carrier of target drug was probed.     

Fluxing Agents on Ceramification of Composites of MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>/Boron Phenolic Resin

Fluxing agents of zinc borate, antimony oxide, galss frit A and glass frit B, with different melting or softening point temperatures, were added into MgO-Al₂O₃-SiO₂/boron phenol formaldehyde resin (MAS/BPF) composites to lower the formation temperature of eutectic liquid phase and promote the ceramification of ceramifiable composites. The effects of fluxing agents on the thermogravimetric properties, phase evolution, and microstructure evolution of MAS / BPF composites were characterized by TG-DSC, XRD and SEM analyses. The results reveal that the addition of a fluxing agent highly reduces the decomposition rate of MAS / BPF composites. Fluxing agents lower the formation temperatures of liquid phases of ceramifiable MAS / BPF composites obviously, and then promote the ceramification and densification process. The final residues of composites are ceramic surrounded by large amount of glass phases.     

热塑型聚氨酯结构形态的研究

本文研究了两个系列的热塑型聚氨酯—聚醚酯氨(ET)和聚酯氨酯(ES)的结构形态与相分离程度,提出了一种确定硬段含量(W_h)的IR方法。与NMR法、投料比法比较,三者得到非常吻合的结果。此外本文还研究了W_h、M_(n·■)、拉伸及热历史对相分离程度的影响。