Communicating Is Crowdsourcing: Wi-Fi Indoor Localization with CSI-Based Speed Estimation

Numerous indoor localization techniques have been proposed recently to meet the intensive demand for location-based service (LBS). Among them, the most popular solutions are the Wi-Fi fingerprint-based approaches. The core challenge is to lower the cost of fingerprint site-survey. One of the trends is to collect the piecewise data from clients and establish the radio map in crowdsourcing manner. However the low participation rate blocks the practical use. In this work, we propose a passive crowdsourcing channel state information (CSI) based indoor localization scheme, C²IL. Despite a crowdsourcing based approach, our scheme is totally transparent to the client and the only requirement is to connect to our 802.11n access points (APs). C²IL is built upon an innovative method to accurately estimate the moving speed solely based on 802.11n CSI. Knowing the walking speed of a client and its surrounding APs, a graph matching algorithm is employed to extract the received signal strength (RSS) fingerprints and establish the fingerprint map. For localization phase, we design a trajectory clustering based localization algorithm to provide precise real-time indoor localization and tracking. We develop and deploy a practical working system of C²IL in a large office environment. Extensive evaluations indicate that the error of speed estimation is within 3%, and the localization error is within 2 m at 80% time in a very complex indoor environment.     

澳洲锂辉石在陶瓷釉料中的应用

本文介绍了澳洲锂辉石的特性及其在陶瓷釉料中的作用、机理及使用方法,并对使用澳洲锂辉石所产生的经济效益进行了分析。     

Unambiguous atomic structural determination of single-walled carbon nanotubes by electron diffraction

We introduce a novel non-dimensional “intrinsic layer-line spacing” concept for electron diffraction analysis of single-walled carbon nanotubes (SWCNTs). Accordingly, we develop a unique method for direct determination of chiral indices (n, m) of the carbon nanotubes from their electron diffraction patterns (EDPs). The new method is totally calibration-free. Errors due to the nanotube inclination are specified. The tilt angle of the carbon nanotube with respect to the incident electron beam is simultaneously evaluated, thus the effect of the tube tilting is compensated for in the (n, m) determination. Several effective procedures are proposed to cross-check the results by using abundant information contained in the diffraction patterns. The efficiency of the method is demonstrated on both simulated and experimental diffraction patterns from single-walled nanotubes. The technique can be extended to structural analysis of nanotubes of structure similar to carbon nanotubes, such as boron nitride nanotubes.     

残余应力对TiC_p－AIN复合材料的影响

本工作采用热压工艺，以Ｙ＿２Ｏ＿３为烧结添加剂，在１８５０℃下制备ＴｉＣ＿ｐ－ＡＩＮ复合材料。结果表明：复合材料的密度、抗折强度、断裂韧性受第二相ＴｉＣ＿ｐ的影响，通过合理工艺因素选择，可以使复合材料的抗折强度和断裂韧性比基体ＡＩＮ材料分别提高４０％，８０％，达到４３８ＭＰａ，５．５９ＭＰａ·ｍ￣（１／２）。由ＸＲＤ内应力分析和ＴＥＭ显微结构测试结果可知，复合材料性能改善原因在于高弹性用量的ＴｉＣ引入以及ＡＩＮ和ＴｉＣ热膨胀系数不匹配导致的残余内应力。     

氧化铁覆膜滤沙对陶瓷化工厂废水中铅吸附性能的研究

用合成方法制备氧化铁覆膜滤沙。在动态条件下,研究了氧化铁覆膜滤沙对重金属离子Pb2 的吸附效果及吸附条件。含Pb2 的陶瓷化工厂废水经氧化铁覆膜滤沙吸附后,Pb2 离子含量显著低于国家排放标准。     

用除尘灰分离炭粉制备活性炭及其改性研究

以除尘灰分离炭粉为原料，确定了制备颗粒活性炭的最佳工艺，并对制备的颗粒活性炭进行不同的改性处理和对不同有机蒸气的吸附实验。利用X—光电子能谱仪分析了改性处理后的表面化学性质。吸附实验证明，活性炭的比表面积、表面化学性质和有机物的性质对吸附过程产生影响。     

双容液位系统的不确定时滞的鲁棒容错控制

针对双容液位控制系统的执行器失效等故障,通过线性化建模,研究了鲁棒自适应容错控制问题。首先在系统无故障正常工作时,考虑建模误差、输入信号的稳定性、系统参数等不确定性因素,利用不确定性上界自适应估计,设计了不确定时滞鲁棒控制器。同时,对系统进行故障检测,研究了一种修正控制律的自适应鲁棒容错控制器设计方法,该控制器通过修补执行器故障所带来的影响使该系统最终有界稳定。最后,通过仿真实验,验证了提出方法的有效性。     

A群脑膜炎球菌多糖菌苗的接种反应及血清学效果

本文对A群脑膜炎球菌多糖菌苗不同剂量、针次和不同年龄儿童接种后反应及血清学效果进行了研究。根据上海市区和山东青州市儿童接种一般反应以及青州市10万余名儿童接种后异常反应观察表明,接种50μg和30μg菌苗后的反应都是很轻微的,但3岁以下婴幼儿的接种反应高于7岁儿童。3岁以下婴幼儿中强体温反应,50μg高于30μg;两种剂量菌苗接种后的免疫应答相似,接种2针后的杀菌抗体水平高于1针,13～24月龄幼儿接种后的杀菌抗体水平明显高于6～12月龄婴儿,但均低于7岁儿童。     

Heat treatment of silica-fiber-reinforced BN-Si<Subscript>3</Subscript>N<Subscript>4</Subscript> matrix composite

A new wave-transparent composite reinforced by silica fibers with a hybrid matrix comprising BN and Si₃N₄ was prepared by precursor infiltration and pyrolysis, and it was heat-treated at elevated temperatures. The variations of the composite during heat treatments were characterized and investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The as-received composite exhibits good mechanical properties, and it is almost amorphous. When treated at 1600°C, it turned brittle, and silica fibers in it were fused; the composite showed a good crystalline form. When treated at 2100°C, the composite broke into pieces, and the composition showed only BN. Si₃N₄ was decomposed, and silica fibers were volatilized. The presence of BN probably affected the phase transitions of silica fibers. __________ Translated from Novye Ogneupory, No. 8, pp. 49–52, August 2007.     

Characterization and performance of Pd-La/spinel catalyst for preparation of 2,6-diisopropylaniline

The Pd-La/spinel catalyst for the preparation of 2,6-diisopropylaniline (2,6-DIPA) by gas-phase amination of 2,6-diisopropylphenol (2,6-DIPP) has been studied. The catalysts before and after reaction were characterized by BET, XRD, differential thermal analysis (DTA)-thermo gravimetric analysis (TGA), FTIR, and NH₃-TPD techniques. The DTA study results show two kinds of coke deposited on the metal and support of Pd-La/spinel catalyst, and they are combusted at about 242 and 324 °C, respectively. The XRD and FTIR spectra of the Pd-La/spinel catalyst show that the coke contains the aromatic and aliphatic rings, alkyl groups, polynuclear aromatic system, hydroxyl groups, and amine groups. The reason for catalyst deactivation can be expressed as follows: coke formed on palladium metals may move from metal to the interface or boundaries of metal-support and acid sites of the support where further dehydrogenation and polymerization are occurring. The H₂ plays a key role in retarding coke formation, but must be in suitable amount to get relatively high selectivity. The rare earth promoter La not only promotes the activity and selectivity by retaining Pd species in the metallic state, but also decreases the formation of carbon by neutralizing the strong acid sites on the catalyst.