SHS结合热压制备TiC-Al2O3/Fe-Al复合材料

以天然钛铁矿、铝粉和石墨为主要原料,采用自蔓延高温合成技术、铝热还原法并结合热压烧结技术,制备出TiC—Al2O3／Fe—Al复合材料．研究表明：预热时间少于120s时,预热时间越长,反应燃烧波速度越大,当预热时间继续增大,对反应燃烧波速度的影响不再显著;加入添加剂Y2O3为0．2％时,金属相较均匀地弥散分布在陶瓷颗粒周围．晶粒尺寸约为2～3μm,复合材料的相对密度达到94％,抗弯强度和硬度分别为599．29MPa、83．7HRA．     

高性能聚酰亚胺纤维

本文综述了聚酰亚胺纤维的性能及其制备工艺,以及聚酰亚胺纤维在结构方面的研究及纤维成型新技术、新工艺。     

黄芩超微饮片的HPLC指纹图谱研究

为了研究黄芩超微饮片的指纹图谱。采用色谱柱为大连依利特公司产品HypersilBDSC18(4.6mm×200mm,5μm)。流动相为甲醇-0.1%磷酸水溶液(45:55),柱温为25℃,流速为1.0mL·min-1,检测波长为280nm,进样量为10μL。初步建立了黄芩超微饮片的HPLC指纹图谱,标定了6个共有指纹峰。研究表明,利用黄芩超微饮片HPLC指纹图谱可以较好地反映黄芩超微饮片的内在质量。     

直面价格战,期盼监管新举措

首先描述了当前我国电信市场上价格大战的种种现象，剖析了价格战对固网市场产生的强烈影响和冲击。指出应对价格战急需政府加强监管力度，最后提出了政府加强监管的政策性建议。     

基于数据库管理系统的电机设计集成系统软件开发

本文基于电机设计的基本原理 ,采用Access数据库管理技术、面向对象技术、SQL查询语言 ,利用VisualBasic 6.0为工具开发了基于数据库管理系统的电机设计集成系统软件。在实际使用中充分证明 ,该软件操作方便、运行良好、可维护性高 ,软件计算结果比较接近实验值。     

Influence of interfacial strength on the fracture toughness of glass-ceramic matrix composites

Nine kinds of glass-ceramic matrix composites with different compositions and interfacial strength (τ _s) were prepared. The influence of τ _s on the fracture toughness(K _1c) of composites was studied. It was discoved that, for the system no chemical reaction taking place at the interface, K _1c increased proportionally with τ _s increasing at the first stage, then decreased when τ _s reached a certain value. According to this result, a model of relationship between τ _s, thermal mismatch (Δα _r) and K _1c was built up. If a chemical reaction took place and a new phase was formed in the interface, the K _1c of composite was effected by the combination of τ _s, chemical bonding, radial interfacial stress and other factors. Project supported by the National Natural Science Foundation of China Synopsis of the first author Wang Lingsen, professor, born in 1938, current research field: special ceramic and ceramic matrix composite, etc.     

A novel integrated silicon capacitive microphone-floating electrode“electret” microphone (FEEM)

A novel principle “electret” microphone, i.e., floating electrode electret microphone, is proposed and implemented in this study. Single-chip fabrication and corrugation technique are used in the design and fabrication of the microphone. The floating electrode is encapsulated by highly insulated materials to ensure that there is no electric-leakage passage between the floating electrode and the electrodes of the microphone. Net-free electronic charges (not “bonded” charges as in traditional electret) in the floating electrode can excite the electric field, which is similar to that of the traditional electret. The floating electrode can be easily charged by use of the “hot” electron technique, available using the avalanche breakdown of the p⁺-n junction. Therefore, the electret microphone is rechargeable, which can greatly increase the lifetime of the device. The preamplifier has been on-chip integrated in a junction-field-effect transistor (JFET) source-follower type with resistors by use of ion implantation. Electret charges are banded in a deep potential trap, thus, this microphone can operate at a high temperature (as high as 300°C) and has high stability and reliability. Experiments show that the prototype has a 3-mV/Pa sensitivity and a larger than 21-kHz frequency bandwidth in a 1 mm ×1-mm diaphragm area. Microphone performance can be further improved by optimized process and design. The fabrication is completely integrated-circuit (IC) compatible, hence, the microphone shows promise in integrated acoustic systems     

饮酒驾车的优化模型

本文通过分析啤酒中酒精在人体体内胃肠(含肝脏)与体液(含血液一)之间的交换机理,分别建立了在短时间内喝酒和长时间喝洒两种情况下,胃肠和体液(含血液)中的酒精含量的微分方程模型.对给出的数据,利用非线性最小二乘数据拟合及高斯-牛顿算法,确定了酒精含量以及酒精从胃肠进入血液的速度系数和酒精从血液渗透出体外的速度系数.继而,对不同喝酒方式下,血液中洒精浓度进行分析;该模型可以预测喝酒后任一时刻血液中的酒精浓度.对于第一问假设大李在第一次检查后半小时喝酒,由于体液中有残留的酒精,故第二次检查时酒精浓度为20.2448毫克/百毫升.     

广钢电网电能质量监测系统的研究

本文详细分析了广钢(白鹤洞生产基地)电能监测系统目前的现状、存在的问题以及广钢电网电能质量智能监测系统的原理、特点及应用后能够获得的经济效益与社会效益。