Comparison of gas sensing properties based on hollow and porous α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanotubes

Hollow and porous α-Fe₂O₃ nanotubes were successfully synthesized by single nozzle electrospinning method followed by annealing treatment. The crystal structures and morphologies of the as-prepared materials were characterized by X-ray diffraction and scanning electron microscopy, respectively. The as-prepared materials were applied to construct gas sensor devices which gas sensing properties were further investigated. The obtained results revealed that porous α-Fe₂O₃ nanotube gas sensors exhibit a markedly enhanced gas sensing performance compared with hollow α-Fe₂O₃ nanotube gas sensors, which was about three times higher to 100 ppm acetone at 240 °C. Interestingly, hollow and porous α-Fe₂O₃ nanotube gas sensors both showed fast response–recovery time and good selectivity, but the porous ones possessed the shorter recovery time. The improved properties could be attributed to the unique morphology of porous nanotubes. Thus, further improvement of performance in metal-oxide-semiconductors materials could be realized by preparation the unique porous structures of nanotubes. Moreover, it is expected that porous metal-oxide-semiconductors nanotubes could be further design as promising candidates for gas sensing materials.     

La<Subscript>1−x</Subscript>Ag<Subscript>x</Subscript>FeO<Subscript>3</Subscript>/halloysites nanocomposite with enhanced visible light photocatalytic performance

La_1?xAg_xFeO₃/halloysites nanotubes (HNTs) nanocomposite was synthesized by sol–gel method. It was characterized by X-ray diffraction, transmission electron microscope, Fourier transform infrared spectroscopy and UV–visible diffused reflectance spectroscopy measurements. The photo-activity of the La_1?xAg_xFeO₃/HNTs nanocomposite was evaluated via degradation of methylene blue (MB) under visible-light irradiation. The results showed that the HNTs with unique pore structure favored the adsorption of organic molecules. Adequate Ag⁺ doping improved the absorption ability for visible light. The La_0.95Ag_0.05FeO₃/HNTs demonstrated the best photocatalytic performance, which achieved as high as 99 % for MB degradation exposed 2 h irradiation. However,further increasing of Ag⁺ doping gradually reduced the photocatalytic activity. The nanocomposite catalyst showed outstanding recyclability after eight cycles which still remained up to 90 %.     

强磁场对硅锰铸钢于A_1点附近等温珠光体相变的影响

通过开展12 T强磁下硅锰铸钢(50Si_2Mn_3)于A_1点温度附近不同等温时间的热处理试验,并对比强磁场与无磁场条件下等温珠光体相变试验结果,研究了磁场对珠光体转变量及组织形貌的影响。研究表明,对于50Si_2Mn_3在A1点以下较高温度范围内,强磁场可缩短珠光体相变的孕育期,促进硅锰铸钢珠光体转变,使其转变量明显增加;强磁场能够提高珠光体转变临界点,使50Si_2Mn_3在A1点以上等温过程中能够发生珠光体相变。     

Aggregation-induced emission luminogen-assisted stimulated emission depletion nanoscopy for super-resolution mitochondrial visualization in live cells

Nano Research - Aggregation-induced emission luminogens (AIEgens) are fluorescent agents that are ideal for bioimaging and have been widely used for organelle targeting, cellular mapping, and...     

A new approach to the prediction of passenger flow in a transit system

A non-linear model is proposed for predicting the rate of passenger flow in a transit system, and its chaotic characteristic is observed. Using wavelets analysis, the passenger flow data for a whole day are decomposed in a multi-scale way to obtain decomposition sequences. Subsequently, a neural network approach is used to predict the sequences. Finally the passenger flow value can be predicted when the predicted sequences are reconstructed. Results show that the present approach is a feasible method for passenger flow prediction.     

Performance-First Control for Discrete-Time LQG Problems

Performance-first control for discrete-time LQG is considered in this paper to minimize the probability that the performance index exceeds a preselected threshold via constructing a closed-loop feedback control law. This problem can be converted into a mean-variance control problem which can be solved by developing a nested form of the variance and using polynomial optimization as a solution scheme.     

A divide-and-conquer hole-filling method for handling disocclusion in single-view rendering

Large holes are unavoidably generated in depth image based rendering (DIBR) using a single color image and its associated depth map. Such holes are mainly caused by disocclusion, which occurs around the sharp depth discontinuities in the depth map. We propose a divide-and-conquer hole-filling method which refines the background depth pixels around the sharp depth discontinuities to address the disocclusion problem. Firstly, the disocclusion region is detected according to the degree of depth discontinuity, and the target area is marked as a binary mask. Then, the depth pixels located in the target area are modified by a linear interpolation process, whose pixel values decrease from the foreground depth value to the background depth value. Finally, in order to remove the isolated depth pixels, median filtering is adopted to refine the depth map. In these ways, disocclusion regions in the synthesized view are divided into several small holes after DIBR, and are easily filled by image inpainting. Experimental results demonstrate that the proposed method can effectively improve the quality of the synthesized view subjectively and objectively.