Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Fuzzy local maximal marginal embedding for feature extraction

In graph-based linear dimensionality reduction algorithms, it is crucial to construct a neighbor graph that can correctly reflect the relationship between samples. This paper presents an improved algorithm called fuzzy local maximal marginal embedding (FLMME) for linear dimensionality reduction. Significantly differing from the existing graph-based algorithms is that two novel fuzzy gradual graphs are constructed in FLMME, which help to pull the near neighbor samples in same class nearer and nearer and repel the far neighbor samples of margin between different classes farther and farther when they are projected to feature subspace. Through the fuzzy gradual graphs, FLMME algorithm has lower sensitivities to the sample variations caused by varying illumination, expression, viewing conditions and shapes. The proposed FLMME algorithm is evaluated through experiments by using the WINE database, the Yale and ORL face image databases and the USPS handwriting digital databases. The results show that the FLMME outperforms PCA, LDA, LPP and local maximal marginal embedding.     

霍夫空间中多足球机器人协作目标定位算法

针对嵌入式仿人足球机器人提出一种霍夫空间中的多机器人协作目标定位算法。机器人利用实验场地中的标志物采用基于三角几何定位方法进行自定位,把机器人多连杆模型进行简化,通过坐标系位姿变换把图像坐标系转换到世界坐标系中,实现机器人目标定位;在多机器人之间建立ZigBee无线传感器网络进行通信,把多个机器人定位的坐标点进行霍夫变换,在霍夫空间中进行最小二乘法线性拟合,获取最优参数,然后融合改进后的粒子滤波实现对目标小球的跟踪;最后在21自由度的仿人足球机器人上进行仿真和实验。数据结果表明,这种多机器人协作的定位算法的精度提高了约48%,在满足实时性的前提下,对目标的跟踪效果也得到了改善。     

基于人类视觉模型的各向异性扩散滤波方法

针对各向异性扩散模型中扩散系数的梯度阈值确定问题进行了研究,提出了一种基于人类视觉模型的各向异性扩散滤波器。首先在PM方程的基础上研究了各向异性扩散系数中梯度阈值的取值问题。根据仿生学原理,分析了韦伯比曲线,将图像根据背景亮度划分为不同的区域,分别采用不同的公式计算梯度阈值。然后讨论了改进后算法在8邻域内的离散实现问题。仿真结果表明,与传统的恒常梯度阈值扩散模型相比,改进后的算法在有效保留图像重要信息的同时对噪声的抑制效果更为理想。     

基于STM32的逆变弧焊电源控制器设计

数字化是弧焊电源的发展趋势,其关键在于控制器的数字化。目前市场上的大多数数字化产品价格相对高昂,采用STM32系列单片机进行经济型数字化弧焊电源控制器的设计和实现。该控制器采用数字式PI方法进行输出电流控制,并具有按键操作、液晶显示、过流保护、过热保护等功能。该控制器还具有良好的扩展I}生,可以通过修改程序增强系统功能。     

浅析高职院校智能排课系统的设计

高校教学管理信息化是高校教育信息管理现代化的基础及关键,而其中排课工作是教学管理信息化过程中的一项重要且繁杂的基础性工作,其实质是具体的落实教学活动。本文介绍了高职院校教学管理系统的排课功能模块设计,重点论述了智能排课子系统的分析和设计,目的是为了开发出一套适合高职院校实际情况的网络教学管理系统。     

项目部合作开发报表系统

结合项目部合作开发报表生成及查询的实际需要,按照公司报表系统通用要求,全力开发易操作且高效率的报表系统。详细阐述报表系统所应用的软硬件环境、系统特点、系统操作说明及在实际工作中应用的优点综述。     

Parallel Algorithms for Image Template Matching on Hypercube SIMD Computers

This correspondence presents several parallel algorithms for image template matching on an SIMD array processor with a hypercube interconnection network. For an N by N image and an M by M window, the time complexity is reduced from O(N2M2) for the serial algorithm to O(M2/K2 + M * log2 N/K + log2 N * log2 K) for the N2K2-PE system (1 ? K ? M), or to O(N2M2/L2) for the L2-PE system (L ? N). With efficient use of the inter-PE communication network, each PE requires only a small local memory, many unnecessary data transmissions are eliminated, and the time complexity is greatly reduced.     

Improved electric insulation ability and ferromagnetic property in Nb2O5 doped BiFeO3-based multiferroic ceramics

Journal of Electroceramics - 0.675BiFeO3-0.3BaTiO3-0.025LaFeO3-x mol% Nb2O5 (x?=?0–1.25) multiferroic lead- free ceramics, fabricated by conventional solid-state reaction, were...     

挤压铸造Al-5Cu合金的组织与性能

使用挤压铸造工艺制备出一种新开发的、高强韧Al-5Cu合金,在50 MPa挤压力下铸造成型后,进行T4和T5热处理.经固溶处理后其抗拉强度达472 MPa,伸长率达10.5%.并对热处理状态下的组织和性能进行了分析研究.