碗米坡水电站水机一级过速保护优化和改进

本文主要介绍了碗米坡电厂水机一级过速保护的组成部分和设计原则,分析了碗米坡水电厂水机一级过速保护在甩负荷试验中该保护误动作导致事故停机问题,并详细阐述相应的优化和处理方法。     

基于实时动作捕捉技术在影视动画中的研究

随着《金刚》、《加勒比海盗2》、《阿凡达》等一系列影视作品的热映,这些影片中的虚拟角色可谓是深入人心,深受观众的喜爱.这些虚拟角色的建立不同于传统的3D影视动画制作,而是取自于真实的人物动作和表情.综述了目前动作捕捉领域中几大主流动作捕捉系统,并且详细讲解了动作捕捉技术在影视动画领域的应用,最后提出了一种新的动作捕捉设计方案-无标记点的动作捕捉设计.     

高密度聚乙烯／聚碳酸酯共混体系性能的初步研究

本文介绍发不同牌号高密度聚乙烯和聚碳酸酯对ＨＤＰＥ／ＰＣ共混物性能的影响结果。同时以ＰＥ接枝马来酸酐和自ＰＥ接枝烯丙基双酚Ａ醚及ＰＥ接枝烯丙基双酚Ａ作为增容剂，研究了不同增容剂、ＰＣ含量和增容剂含量对ＨＤＰＥ／ＰＣ共混物力学和热性能的影响。     

利用改进的热核特征分析三维网格的局部对应

为了更准确地构建非刚体三维网格模型之间的形状对应关系,提出一种改进的热核特征分析与研究三维网格模型之间的局部对应关系.该方法利用压缩流形模式压缩三维网格模型的特征函数,截取局部顶点;利用乘法器交替方向(ADMM)优化计算三维网格的压缩流形基替换传统的离散化拉普拉斯-贝尔特拉米算子以改进热核特征;选取相同的压缩部位进行局部的对应匹配.实验结果表明,基于改进的热核特征与传统的离散化热核特征相比有更加突出的效果.     

自由文本电子病历信息抽取综述

电子病历信息抽取技术能够从自由文本电子病历中获取到有用的关键信息,从而为医院的信息管理和后续的信息分析处理工作提供帮助。简要介绍了现阶段自由文本电子病历信息抽取的主要流程,分析了近十几年来关于自由文本电子病历中命名实体、实体修饰与实体间关系三类关键信息的单独抽取以及联合抽取方法的研究成果,对这些成果所采用的主要方法、使用的数据集、最终的实验效果等进行了对比总结。除此之外,还对最新的几种流行方法的特点以及优缺点进行了分析,对目前电子病历信息抽取领域常用数据集进行了总结,分析了目前国内相关领域的现状和发展趋势。     

Interactive Evolutionary Multi-Objective Optimization Algorithm Using Cone Dominance

As the number of objectives increases, the performance of the Pareto dominance-based Evolutionary Multi-objective Optimization (EMO) algorithms such as NSGA-II, SPEA2 severely deteriorates due to the drastic increase in the Pareto-incomparable solutions. We propose a sorting method which classifies these incomparable solutions into several ordered classes by using the decision maker's (DM) preference information. This is accomplished by designing an interactive evolutionary algorithm and constructing convex cones. This method allows the DMs to drive the search process toward a preferred region of the Pareto optimal front. The performance of the proposed algorithm is assessed for two, three, and four-objective knapsack problems. The results demonstrate the algorithm's ability to converge to the most preferred point. The evaluation and comparison of the results indicate that the proposed approach gives better solutions than that of NSGA-II. In addition, the approach is more efficient compared to NSGA-II in terms of the number of generations required to reach the preferred point.     

热连轧精轧宽度控制技术的研究及应用

在热轧带钢其他尺寸精度普遍较高的情况下,宽度控制精度的提升变得越来越重要。提出了一种新的精轧带钢宽度控制综合解决方案：针对带钢头部宽度控制,开发精轧机架冲击速降自学习模型,以减少带钢头部拉窄现象;通过合理配置精轧活套张力稳定因子,减少带钢中部宽度波动现象;通过精轧宽度反馈控制和宽展预测模型修正功能,提高带钢全长宽度精度。相关研究成果已成功应用于宝钢集团某热轧产线三电自主集成改造项目中,改造后带钢宽度控制精度得到显著提高。     

Oxidation behavior and mechanism of aluminum oxynitride (AlON) at elevated temperatures

The oxidation behavior and mechanism of aluminum oxynitride (AlON) powder exposed to air at elevated temperatures between 800°C and 1300°C was investigated by X-ray diffractometry (XRD), scanning electron microscope (SEM), electron spin resonance (ESR), nuclear magnetic resonance (NMR), and simultaneous thermogravimetry, differential thermal analysis, and mass spectrometry techniques (TG-DTA-MS). The weight of AlON gradually increases to a maximum value at 1150°C and then decreases with further heating. Meanwhile, AlON powder undergoes chemical changes, as evidenced by lattice expansion, and turns eventually into alumina. ESR spectra reveal the occurrence of lone pair electrons in the oxidized products and the intensity of corresponding resonance signal increases before disappearing with the increase in temperature. Combined with the results of NMR and TG-DTA-MS, the measured data suggest that Al-N in [AlO₃N] tetrahedron and [AlO₅N] octahedron are gradually oxidized into Al-O-N group with lone pair electrons, which causes continuous weight gain and lattice expansion. Further oxidation at higher temperatures results in alumina and N₂.     

聚碳酸亚丙酯生物降解渗水地膜的研制及性能分析

为了解决农田白色污染问题,选用大分子聚碳酸亚丙酯（PPC）和聚己二酸丁二醇酯/对苯二甲酸丁二醇酯（PBAT）两种生物降解材料以及强力渗水助剂为原料制备PPC生物降解渗水地膜,采用多次吹膜测试法对地膜的配方和工艺方案进行了优选,并通过万能拉力测试机、紫外老化试验箱等对地膜的力学性能和降解性能进行了表征。结果表明,按照优选方案A₉和A₂的配方和工艺,结合渗水地膜加工工艺,可以成功制备厚度为（0.007±0.002） mm的薄型PPC生物降解渗水地膜;以A₉和A₂为基础并进行优化处理后的工艺技术试制的6个产品的力学性能均能够达到GB/T 35795—2017标准要求;0.007 mm PPC生物降解渗水地膜60 d后开始出现横纵向裂口,180 d后降解率为77.06 %,365 d后降解率为95.72 %。