Preparation and self‐assembly of poly(diglycidyl maleate‐co‐stearyl methacrylate)

Poly(diglycidyl maleate‐co‐stearyl methacrylate) (P(DGMA‐co‐SMA)) with reactive epoxy groups was synthesized by reaction of poly(maleic anhydride‐co‐stearyl methacrylate) (P(MA‐co‐SMA)) and epichlorohydrin. The effect of precipitant on self‐assembly behaviors of the resultant copolymer was investigated. It was found that vesicles and nanotubule liked aggregates can be obtained through self‐assembly of P(DGMA‐co‐SMA) in THF solution using CH₃CH₂OH (EtOH) as precipitant while spheral aggregates can be obtained using H₂O as precipitant. The mechanism of the self‐assembly behavior was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Trusted Integrated Circuits: The Problem and Challenges

Hardware security has become more and more important in current information security architecture. Recently collected reports have shown that there may have been considerable hardware attacks prepared for possible military usage from all over the world. Due to the intrinsic difference from software security, hardware security has some special features and challenges. In order to guarantee hardware security, academia has proposed the concept of trusted integrated circuits, which aims at a secure circulation of IC design, manufacture and chip using. This paper reviews the main problems of trusted integrated circuits, and concludes four key domains of the trusted IC, namely the trusted IC design, trusted manufacture, trusted IP protection, and trusted chip authentication. The main challenges in those domains are also analyzed based on the current known techniques. Finally, the main limitations of the current techniques and possible future trends are discussed.     

掺锰BaTiO3 PTCR陶瓷的电子顺磁共振研究

利用电子顺磁共振（EPR）方法对Mn掺杂的BaTiO3 PTCR陶瓷在120－450K的温度范围内进行了研究，研究结果表明：高自旋Mn^2 离子的6重谱线非常明显，表征谱线位置的g因子为2．009 9,Mn^2 离子信号弱弱与BaTiO3晶体结构密切相关，Mn^2 离子信号的温度分布呈U型，即在三方相和立方相时，信号强度较强，而在四方相和斜方相时信号很弱，这是因为在四方相和斜方相中，由于BaTiO3晶体结构的扭曲和畸变，导致Mn^2 和Vo空位缔合生成Mn^2 -Vo复合缺陷，未成对电子的消失以及复合缺陷n^2 -Vo的生成最Mn^2 在四方相和斜方相（200－380K）消失的主因，实验中没有发现Mn^3 和Mn^4 的信号，而与实验的环境条件一致，掺Mn后样品Curie点的漂移可能是Mn进入晶格的一个判据，此外，由于试样的n(Ba)/n(Ti)=1，因而没有发现钡空位VBa及其它的复合缺陷（如：VBa-Mn^2 ,Mn^3 -Vo,La^3 -Mn^3 等），Mn^2 离子等电子陷阱的生长是Curie温度处电阻骤然增加的主要原因。     

高炉用氮化硅结合碳化硅制品化学分析方法的研究

确定了高氧化铝含量（０．５％－２０％）的高炉用氮化硅结合碳化硅制品中Ｓｉ３Ｎ４、ＳｉＣ、ｆＳｉ、ＳｉＯ２、Ｆｅ２Ｏ３、Ａｌ２Ｏ３六种化学成分的化学分析方法试验条件．并按条件试验选择了分析方法，进行了精密度、准确度和实际工作的考核，证明了本分析方法可靠、切实可行，能满足科研工作和生产的要求。     

一种基于过零点的时延测量方法

信号传输时间（时延）的测量,是雷达、声纳系统的关键技术之一。本文研究了一种基于过零点的时延测量方法,在建立过零点搜索模型的基础上推导得出时延测量的测量结果表达式;定量分析了高斯白噪声条件下过零点时延测量的测量精度,得到测量误差的理论表达式。仿真与实验表明,过零点时延测量精度与信号频率、过零点数目、信噪比密切相关,当信噪比较高时,其测量精度与经典FFT法相当,而优势在于过零点时延测量的算法简单、计算量小,适用于对实时性要求较高的测量场合。     

网络化雷达协同抗欺骗式干扰技术研究进展

网络化雷达在战场上可以构成全方位、立体化、多层次的战斗体系,因 此对欺骗式干扰对抗具有很大的优越性。本文首先简要介绍了网络化雷达概念,并分析了其 抗干扰优势。根据网络化雷达融合结构不同,将现有协同抗干扰方法分为数据级融合抗欺骗 式干扰和信号级融合抗欺骗式干扰两大类,其中,数据级融合方法进一步分类为点迹关联和 航迹关联两类。本文对各类方法进行了详细介绍,在此基础上,比较分析了数据级融合和信 号级融合两类方法的抗干扰性能及算法复杂度,为抗干扰措施的选择提供依据。最后,针对 现有方法中存在的问题,对网络化雷达协同抗欺骗式干扰的发展趋势进行展望,指出下一步 的研究方向。     

年产200吨4，4’-二氟二苯甲酮（DFBP）的工业化设计及可行性研究

本文在大量实验数据基础上，对4，4’-二氟二苯甲酮(DFBP)进行了年产200吨规模的工业化设计，从技术关键、工艺流程、设备选材、三废治理及成本核算等方面对DFBP工业化设计的可行性进行了评价，该设计有如下特点：工艺简单、合理，操作稳定、安全，三废治理有效，原材料及设备投资少，见效快，适合工业化大生产。     

Catalytic coal partial gasification in an atmospheric fluidized bed

The coal partial gasification catalyzed by limestone, sodium carbonate and dolomite was studied using a bench-scale atmospheric fluidized bed in the presence of air and steam at 900 °C. The effects of limestone, sodium carbonate and dolomite on composition, heating value, gas yield of product gas and carbon conversion in the catalytic coal partial gasification have been examined. The experimental results show that the catalysts can effectively improve the gas quality, the heating value and the gas yield of product gas and carbon conversion. The catalytic effect of sodium carbonate is better than that of limestone and dolomite. The increase of limestone loading can enhance the quality of product gas, such as the content of combustible gas, the high heating value and the gas yield, during coal partial gasification. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

微孔发泡过程中聚合物/超临界CO2均相体系形成的研究

阐述以超临界CO2为发泡剂的微孔发泡中均相体系的形成过程，研究聚合物熔体和气体的混合机理，并分析影响均相体系形成过程的因素。结果表明，聚合物和气体本身的结构和性质、工艺条件、加工设备、外力场等均影响均相体系的形成，振动力场的引入可以提高多相体系的混合程度，在聚合物／气体均相体系的形成过程中引入振动力场是一个全新的研究方向。     

取代2-四氢萘酮的一步合成新方法研究

本文介绍了一步法制备取代2-四氢萘酮的新方法,与常规合成方法相比,该法具有明显的优点:不需要先将羧酸转化成酰氯,避免了三氯化铝以及含氯溶剂的应用,并使催化剂得以循环利用。因此,该方法安全、环保,有望取代常规的付-克反应在工业上的应用。