超辐射发光二极管的结构特性及其应用

近几年来,由于超辐射发光二极管在光纤陀螺和光时域反射仪等方面的重要应用,已引起了人们的极大关注,许多国家都在竞相研制和开发.本文综述了目前超辐射发光二极管的主要结构和特性及其应用前景.     

模拟电路的模块级故障诊断

本文以多端口元件或子网络为基本单元，提出了一种模块级故障诊断方案，这种方案的故障模型更符合电路的实际情况，因而具有更广泛的实际意义，文中首先推导了模块故障诊断议程，并对模块故障可测性问题进行了一般性讨论。然后，给出了模块故障可测的几个拓扑条件，并通过定义广义独立通路使这些拓扑条件适用于一般的非互易网络。     

Minimizing total weighted completion time when scheduling orders in a flexible environment with uniform machines

We consider the scheduling of orders in an environment with m uniform machines in parallel. Each order requests certain amounts of k different product types. Each product type can be produced by any one of the m machines. No setup is required if a machine switches over from one product type to another. Different product types intended for the same order can be produced at the same time (concurrently) on different machines. Each order is released at time zero and has a positive weight. Preemptions are allowed. The completion time of an order is the finish time of the product type that is completed last for that order. The objective is to minimize the total weighted completion time. We propose heuristics for the non-preemptive as well as the preemptive case and obtain worst case bounds that are a function of the number of machines as well as the differences in the speeds of the machines. Even though the worst-case bounds we showed for the two heuristics are not very tight, our experimental results show that they yield solutions that are very close to optimal.     

我国矿井水资源化利用现状及前景展望

针对现阶段我国在矿井水资源化政策制定、科学研究、人才培养及宣传等方面存在的问题,在总结全国53处煤矿矿井水利用率、利用方式、利用价格等现状的基础上,分析了矿井水资源化利用的制约因素,提出了出台落地性政策、加强创新人才建设培养、分质分类利用、加大宣传和发挥行业协会作用等政策方面的建议,指出高质量矿井水的开发、矿井水资源热能利用、产业化和规模化经营、废弃矿矿井水资源化利用等是矿井水热能利用的方向。     

基于FPGA的光纤陀螺信号采集处理卡设计

光纤陀螺姿态测量系统中的信号采集和处理是系统的一个重要环节;文章介绍了基于FPGA的光纤陀螺信号采集处理卡的设计过程,采用Verilog HDL实现FPGA内部逻辑电路设计,选用AD7846完成信号的数模转换,通过FPGA编程实现光纤陀螺的标定和误差补偿,设计了RS232/422通用异步串口通信硬件电路并在FPGA上实现了串口通信;实验结果表明:该卡能够准确实时地采集并按预定的设计处理光纤陀螺信号。     

Mining diversity on social media networks

The fast development of multimedia technology and increasing availability of network bandwidth has given rise to an abundance of network data as a result of all the ever-booming social media and social websites in recent years, e.g., Flickr, Youtube, MySpace, Facebook, etc. Social network analysis has therefore become a critical problem attracting enthusiasm from both academia and industry. However, an important measure that captures a participant’s diversity in the network has been largely neglected in previous studies. Namely, diversity characterizes how diverse a given node connects with its peers. In this paper, we give a comprehensive study of this concept. We first lay out two criteria that capture the semantic meaning of diversity, and then propose a compliant definition which is simple enough to embed the idea. Based on the approach, we can measure not only a user’s sociality and interest diversity but also a social media’s user diversity. An efficient top-k diversity ranking algorithm is developed for computation on dynamic networks. Experiments on both synthetic and real social media datasets give interesting results, where individual nodes identified with high diversities are intuitive.     

贝叶斯项目反应模型及nimble实现

针对国际学生评估项目2015年数据(PISA),采用单参数、双参数和三参数的项目反应模型进行建模,在每个模型下,分别采用logistic连接函数和probit连接函数.针对6个模型,应用偏差信息准则(Deviance Information Criterion,DIC)和伪边际似然对数(Logarithm of Pseudo-Marginal Likelihood,LPML)进行模型评价和模型选择.结果表明,当连接函数为logistic双参数的项目反应模型表现最好,因为这个模型下的DIC值最小,并且LPML值最大.我们采用R软件nimble包进行编程.     

基于SPW的流星余迹极低信噪比通信系统建模与仿真*

SPW具有丰富的通信库和DSP库,且具有灵活的自定义模块能力,是一种复杂通信系统建模和仿真工具.流星余迹通信是一种特殊的通信方式,在通信领域中具有特殊的重要地位.介绍了流星余迹极低信噪比通信系统原理的基础,给出了基于SPW的流星余迹极低信噪比通信系统仿真模型及仿真结果.     

化学交联聚酰亚胺隔膜增强锂离子电池性能研究

隔膜作为锂离子电池的重要组成部分,用于阻隔阴极和阳极直接接触,同时为锂离子在电极间的传输提供有效通道。聚酰亚胺隔膜因其具有充放电循环寿命长、机械强度适中、良好的电绝缘性能以及自熄能力等优点,而受到广泛关注。以对苯二甲胺作为交联剂,将聚酰亚胺隔膜进行化学交联,研究了交联时间与隔膜形貌、结构及性能之间的构效关系。随着交联时间的增加,隔膜的孔隙率和吸液率逐渐降低,电解液接触角和机械强度逐渐增大。电化学测试表明,随着交联时间的增加,隔膜的本体阻抗逐渐增大,进而离子电导率逐渐降低,而交联隔膜的界面阻抗均远小于未交联隔膜,且交联隔膜的电化学窗口也均大于未交联隔膜。通过组装半电池测试发现,交联隔膜所组装电池的倍率性能和循环性能均优于未交联隔膜,当交联时间为48 h时,电池性能表现最优,循环100次以后,放电比容量为130.2 mA·h/g,容量保留率为91.1%。     

含砷氰化尾矿回填利用污染控制技术试验研究

针对某黄金生产企业含砷氰化尾矿污染特征,开展了搅拌洗涤法、臭氧氧化法、酸化溶砷法、铁盐固砷法等多种无害化方法联合处理试验研究,旨在将该含砷氰化尾矿处理至满足氰渣规范回填利用污染控制要求。结果表明：该含砷氰化尾矿回填利用污染控制技术工艺为压滤调浆搅拌洗涤+臭氧氧化+酸化溶砷+铁盐固砷,最佳参数为原矿浆压滤后加水调浆,矿浆浓度40%,臭氧投加量0.66 g/L,酸化溶砷pH值3、曝气量0.1 m³/h、反应时间2 h,铁盐固砷七水合硫酸亚铁投加量20.0 g/L、反应时间1 h。研究结果为该黄金生产企业含砷氰化尾矿回填利用提供了技术支撑。