PMD Measurement of Hollow-Core Photonic Bandgap Fiber by Investigating Power Penalty of Optically Generated Microwave Signals

A simple method based on carrier suppression modulation for measuring first-order polarization-mode dispersion of hollow-core photonic bandgap fiber (HC-PBGF) is proposed and investigated. By adjusting the incident optical wavelength and measuring the power penalty of optically generated microwave signals, the wavelength-dependent differential group delay (DGD) in HC-PBGF can be obtained. Moreover, this proposed method is chromatic-dispersion-insensitive. The experimental results indicate that a segment of 20-m HC-PBGF exhibits highly birefringent DGD of 25, 59, and 84 ps with measurement error less than 2 ps for the incident optical wavelength of 1560, 1575, and 1580 nm, respectively     

A study of arc stability of basic electrode in view of uniform design method

In order to develop a basic electrode with low fume and good usability, a uew slag system has been designed after analyzing several basic electrode slag systems. Then in view of uniform design method, arranging the experiment points by it, the influenced laws of the uew system coating compouents on the arc stability had been searched. In the formula, niue coating compouents were taken as independent variables and they were divided into six levels in all twenty-four experiments. The arc stability was taken as function and taken down the data when welding and then put them into the computer to be processed statistically. The analysis results give the mathematical model and trend diagrams between independent variables and the function. They indicate that the effects of many coating compouents on the arc stability are in the mutual form. The mutual effects between CaCO3 and BaF2, BaF2 and BaCO3 , increases the arc stability separately. While the mutual effects between CaF2 and iron powder, the square item of iron powder itself decreases the arc stability separately.     

低频天波传播预测与低电离层模式参数的测定

在理想化的均匀球面通过进一步地与具有突变边界的均匀各向同性同心球面电离层条件下的LF天波全波解的基础上，考虑由海陆之差引起的地面导电率的变化、大气和低电离层的不均匀性以及由地磁场引起的各向异性特性等因素的影响，推导出了较严格预测实际地与低电离层条件下场强与传播相延精确预测的完善公式。 给出了一些低电离层模式参数的实测结果。这些模式参数为参考高度h0、参考浓度N0与梯度参数α。由罗兰－C天波信号场强与相位的精细测量数据求得的。     

Al-Cu-Fe QUASICRYSTALLINE PHASE FORMATION BY MECHANICAL ALLOYING

Al-Cu-Fe alloys were prepared from elemental powders in a high-energy planetary ball mill. A sequence of solid state reactions resulting in quasicrystal (QC) phase formation takes place during heating of the as-milled powder. These reactions were studied by both differential scanning calorimetry and x-ray diffraction methods. Mechanically alloyed powders were consolidated by cold and hot pressing, as well as by explosive compaction. After annealing at sufficiently high temperatures, the consolidated samples are single-phase QC, except the ones consolidated by explosion. The high reactivity of the as-milled alloys causes the appearance of high porosity of the consolidated samples after the annealing.     

结构滑模控制的一种指数趋近律方法

提出了一种指数趋近律 ,当正常运动段远离切换面时 ,能快速地趋向切换面 ;当运动接近切换面时 ,趋近速度又大大降低。这样与常用指数趋近律相比 ,过渡时间、系统的抖动以及所需控制力都能进一步减小。最后将这一理论应用到三层剪切型框架进行数值模拟 ,振动控制效果明显。