Direct equivalence between geometric conditions and algebraic conditions for discrete-time nonlinear observer

Unlike the continuous-time case, algebraic necessary and sufficient conditions for a single output discrete-time system to be state equivalent to a nonlinear observer canonical form have been found and are easier to verify for those who are not accustomed to differential geometry. The geometric conditions look very different from the algebraic conditions. In this paper, we show direct equivalence of the geometric conditions and the algebraic conditions in order to enhance the understanding of the geometric conditions.     

Synthesis and physicochemical characterization of amphiphilic block copolymer self‐aggregates formed by poly(ethylene glycol)‐block‐poly(ϵ‐caprolactone)

Diblock copolymers with different poly(ε‐caprolactone) (PCL) block lengths were synthesized by ring‐opening polymerization of ε‐caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG‐OH, MW 2000) as initiator. The self‐aggregation behaviors and microscopic characteristics of the diblock copolymer self‐aggregates, prepared by the diafiltration method, were investigated by using ¹H NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG–PCL block copolymers formed the self‐aggregate in an aqueous environment by intra‐ and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations of the block copolymer self‐aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The partition equilibrium constants (K_v) of pyrene, measured by fluorescence spectroscopy, revealed that the inner core hydrophobicity of the nanoparticles increased with increasing PCL chain length. The aggregation number of PCL chain per one hydrophobic microdomain, investigated by the fluorescence quenching method using cetylpyridinium chloride as a quencher, revealed that 4–20 block copolymer chains were needed to form a hydrophobic microdomain, depending on PCL block length. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3520–3527, 2006     

Encapsulation mechanism of N2 molecules into the central hollow of carbon nitride multiwalled nanofibers

Nitrogen molecules have been encapsulated into the central hollows of vertically aligned carbon nitride (CN) multiwalled nanofibers by dc plasma-enhanced chemical vapor deposition with C₂H₂, NH₃, and N₂ gases on a Ni/TiN/Si(1 0 0) substrate at 650 °C. X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure spectra showed the existence of nitrogen molecules in CN nanofibers. Elemental mapping images with electron energy loss spectroscopy of the CN nanofiber and catalyst metal, and optical emission spectroscopy spectra of the plasma showed the distribution of nitrogen atoms and molecules in the CN nanofiber, catalyst metal, and gaseous precursor, respectively. These studies showed that atomic nitrogen diffused into the catalytic metal particle because of the concentration gradient and then saturated at the bottom of the particle. Saturated nitrogen atom participated in the formation of the CN nanofiber wall but most of nitrogen was trapped in the central hollow of the nanofiber as molecules.     

Synthesis and characterizations of a polyimide containing a triphenylamine derivative as an interlayer in polymer light-emitting diode

Polyimide containing triphenylamine derivative (TPD-PI) was synthesized to prepare a polymer interlayer having insolubility in common nonpolar solvent for light-emitting polymers. N,N′-diphenyl-N,N′-bis(4-aminophenyl)-1,1-biphenyl-4,4′-diamine, as a new triphenylamine-containing diamine monomer, was synthesized by the palladium-catalyzed amination reaction between 4-nitrodiphenylamine and 4,4′-dibromobiphenyl and subsequent reduction of the nitro-intermediate. The TPD-PI was prepared from the synthesized diamine monomer and 4,4′-(hexafluoropropylidene)-diphthalic anhydride by the standard two-step polymerization method, which involved ring-opening polymerization and subsequent cyclodehydration. The structures and properties of the monomer and the resulting polyimide were characterized with ¹H and ¹³C NMR, elemental analysis, gel permeation chromatography, UV-visible spectroscopy, etc. The TPD-PI is readily soluble in aprotic polar solvents such as N-methyl-2-pyrrolidinone and N,N-dimethylformamide and insoluble in nonpolar solvents such as toluene and xylene. The highest occupied molecular orbital (HOMO) level of the TPD-PI was measured to be 5.5 eV by a photoelectron spectrometer in air, and the band gap was calculated as 3.1 eV from the onset of UV-vis spectrum. The polymer light-emitting diode with the thin TPD-PI layer between a hole injection layer and an emitting polymer layer was fabricated to examine the performance of the polyimide as an polymer interlayer. Although the luminous efficiency of the device is lowered by the introduction of the TPD-PI interlayer, the lifetime of the device is improved.     

Fluidized bed combustion of high ash anthracite: Analysis of combustion efficiency and particle size distribution

Fluidized bed combustion of high ash anthracite (HAA) was experimentally studied. The combustor consists of 0.25 m ID bed, and auxiliary equipments for coal feeding, ash removal, lemperature control, etc. Experimental results elucidate main cause of fuel loss to be elutriation of fines (i.e., flyash) containing unburned carbon. However, detailed balances of particle size distribution show majority of carbon in flyash comes from fines contained in the feed instead of attrition of coarse particles. The latter is the main source of flyash for conventional coal. The difference is due to much smaller attrition rate of HAA; feed HAA particles do not shrink much in size by combustion and attrition.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

Effect of low-cycle fatigue on the hot ductility of plain carbon steel

In a continuous casting steelmaking operation, the surface of a slab is under a condition that can be characterized as high-temperature, low-cycle fatigue in which the tensile and compressive stress is repeatedly developed. For this reason, for the evaluation of the hot ductility of a slab, considering the fatigue deformation is more feasible before a tensile or compressive test. In this study, the effects of low-cycle fatigue on the hot ductility of steels with a carbon content of 0.06–0.8 wt.% are investigated at various temperatures. For a carbon content of 0.06%, there were no significant differences between the RA values from a simple tensile test and those from a tensile test after fatigue deformation. The tendency of ductility deterioration with fatigue deformation is evident in 0.1 %C steel, and is due to the deformation-induced ferrite film that forms around the prior austenite grain. Conversely, high carbon steel containing 0.8 %C did not show a recovery of hot ductility in a low temperature region, and the specimen on which the tensile was measured after fatigue showed a higher hot ductility in the low temperature region, which is thought to result from the pearlite refinement effects. As the results obtained in this work showed noticeable differences in the hot ductility of carbon steel through the test conditions, it is suggested that for more accurate data, fatigue deformation be adopted in which the temperature range in an unbending operation is determined in the steelmaking factory.     

Thermodynamic reassessment of the Cd−Zn system

The Cd−Zn system has been thermodynamically reassessed with the CALPHAD method by combining more recent experimental data, in particular the activities of zinc in the liquid phase. A good agreement is obtained between the calculated and experimental thermodynamic parameters as well asphase boundaries.     

How purchase intention consummates purchase behaviour: the stochastic nature of product valuation in electronic commerce

This study challenges the conventional assumption that online customers with high purchase intention routinely move to the purchase stage. To this end, the process of how online customers form purchase intention and behaviour is examined. On the basis of product value distribution (PVD), we propose that the hypothetically expected product value (i.e. PVD average) determines purchase intention, whereas the actual probability of attaining the expected product value (i.e. PVD variance) moderates purchase behaviour. This proposal indicates that the expected product value has significance only when repeated purchase is assumed given that most consumers do not repeatedly purchase the same product in reality. Thus, the actual probability of attaining the expected product value more critically affects customer behaviour than does its expected value. The effectiveness of the research model is verified by conducting a survey on 300 online mall shoppers in Korea. The results confirm model effectiveness.     

Retracted: Antecedents and Consequences of Gender Swapping in Online Games

This study examines the reasons underlying gender swapping and its impacts on online gaming behavior. While previous studies considered gender swapping to be an abnormal or rare exception in one's self‐presentation, this study hypothesized that people swap genders as a rational choice based on practical benefits. An online survey was conducted with 318 male players of MMORPGs in Korea. Players swapped gender in games to gain benefits from other players under the condition of anonymity rather than to represent their own gender identity. Men playing female avatars displayed more socially amiable behaviors conventionally characterized as more feminine. Moreover, players were more willing to purchase virtual goods to decorate their gender swapped avatars, mediated by their emotional attachment to their avatar.